Multi-variable Optimization Formulation for Maximum Power Transmission Capability of a Standalone Six-phase Induction Generator

Authors

  • Saikat Ghosh Dept. of Electrical Engineering, NIT Durgapur, 713209, India
  • S. N. Mahato Dept. of Electrical Engineering, NIT Durgapur, 713209, India

DOI:

https://doi.org/10.13052/dgaej2156-3306.37314

Keywords:

Six-phase induction generator, excitation capacitor, renewable energy sources, optimization, maximum power transmission, rural area electrification.

Abstract

This paper presents an optimization based scheme to derive the maxi-
mum power transmission capability of a self-excited six-phase induction
generator (SPIG). For execution of this proposed scheme, an easy and
straight forward method has been developed here for figuring out the
maximum amount of power which can be transmitted by SPIG consid-
ering different functional conditions. An optimization based problem is
formulated with the help of multi-variable constraint, for finding out the
maximum power transmission capability of SPIG. The total impedance of
SPIG, calculated from its equivalent circuit, is considered as the objec-
tive function. Fmincon optimization toolbox of MATLAB has been used
to solve this numerical based problem. The critical power and the max-
imum power transmission capability have been investigated for varia-
tions of capacitor, load power factor and speed. The power transmis-
sion capability of SPIG directly depends on the factors like machine
parameters, rotor speed, power factor of the load and the capacitance value of self-excitation. From the analysis of the simulated results, it is
found that the performance of SPIG is satisfactory for various operating
conditions.

Downloads

Download data is not yet available.

Author Biographies

Saikat Ghosh, Dept. of Electrical Engineering, NIT Durgapur, 713209, India

Saikat Ghosh received the bachelor’s degree in Electrical Engineering from
College of Engineering and Management, Kolaghat in 2015, the master’s
degree in Electrical Engineering from National Institute of Technology,
Arunachal Pradesh in 2017. Currently, he is a Research Scholar in Elec-
trical Engineering Department, National Institute of Technology, Durgapur.
His research areas include power electronics and drives, multi-phase induc-
tion machine, renewable energy etc.

S. N. Mahato, Dept. of Electrical Engineering, NIT Durgapur, 713209, India

S. N. Mahato received the B.E. degree in electrical engineering in 1992 and
the M.Tech. degree in 2002 from the National Institute of Technology, Dur-
gapur, India. He received Ph.D. degree from Indian Institute of Technology,
Roorkee, in 2008. Currently, he is a professor in the Department of Elec-
trical Engineering, National Institute of Technology, Durgapur. His current
research interests include application of induction generator for generating
power from nonconventional energy sources

References

F. Bu, H. Xu, W. Huang, H. Liu and Y. Zhao, “Control strategy for

five phase dual stator-winding induction generator DC generating sys-

tem,” 2015 IEEE 6th International Symposium on Power Electronics for

Distributed Generation Systems (PEDG), Aachen, 2015, pp. 1–4.

K. R. M. Vijaya Chandrakala and Balamurugan, S., “Simulated anneal-

ing based optimal frequency and terminal voltage control of multi source

multi area system”, International Journal of Electrical Power & Energy

Systems, vol. 78, pp. 823–829, 2016.

K. Kurohane, T. Senjyu, A. Yona, N. Urasaki, T. Goya, and T. Funabashi,

“A hybrid smart AC and DC power system,” IEEE Trans. Smart Grid,

vol. I, no. 2, pp. 199–204, Sep. 2010.

P. Ch. L oh, D. Li, Y. K. Chai, and F. Blaabjerg, “Autonomous operation

of hybrid micro grid with AC and DC subgrids,” IEEE Trans. Power

Electron., vol. 28, no. 5, pp. 2214–2223, May. 2013.

Levi E, Bojoi R, Profumo F, Williamson S. Multiphase induction motor

drives – a technology status review. IET Electric Power Applications

; 1:489–516.

Barrero, Federico, and Mario J. Duran. “Recent advances in the design,

modeling, and control of multiphase machines—Part I.” IEEE Transac-

tions on Industrial Electronics 63.1 (2016): 449–458.

Duran, Mario J., and Federico Barrero. “Recent advances in the design,

modeling, and control of multiphase machines—Part II.” IEEE Transac-

tions on Industrial Electronics 63.1 (2016): 459–468.

Kamel Nounou, Khoudir Marouani, Mohamed Benbouzid, Bekheira

Tabbache. Six-phase induction machine operating as a standalone self-

excited induction generator. IEEE ICGE 2014, Mar 2014, Sfax, Tunisia.

pp. 158–163. ffhal-01023508f.

T. S. B. R. C. Bansal and D. P. Kothari, “Bibliography on the application

of induction generators in non-conventional energy systems,” IEEE

Trans. EC, vol. 18, pp. 433–439, 2003.

G. Singh, “Self-excited induction generator research survey,” Power Sys.

Res. (Elsevier), vol. 69, pp. 107–114, 2004.

D. K. A. Kheldoun, L. Refoufi, “Analysis of the self-excited induction

generator steady state performance using a new efficient algorithm,”

Electric Power Systems Research, vol. 86, pp. 61–67, 2012.

Bala Murali Krishna, Vanka and Vuddanti, Sandeep. “Identification of

the best topology of delta configured three phase induction generator

for distributed generation through experimental investigations.” Inter-

national Journal of Emerging Electric Power Systems, vol., no., 2021,

pp. 000010151520210064. https://doi.org/10.1515/ijeeps-2021-0064.

B. M. K. V and V. Sandeep, “Experimental Study on Different Modes

of Self Excited Induction Generator Operation,” 2020 2nd PhD Collo-

quium on Ethically Driven Innovation and Technology for Society (PhD

EDITS), 2020, pp. 1–2, doi: 10.1109/PhDEDITS51180.2020.9315310.

Bala Murali Krishna, Sandeep “Design and Simulation of Current Sen-

sor based Electronic Load Controller for Small Scale Three Phase

Self Excited Induction Generator System.” International Journal of

Renewable Energy Research. Vol. 10, No. 4 (2020).

M. H. Haque, A Novel method of evaluating performance character-

istics of a self-excited induction generator”, IEEE Trans. On Energy

Conversion, Vol. 24, No. 2, 2009, pp. 358–365.

R. C. Bansal, “Three-phase self-excited induction generators: An

overview”, IEEE Transactions on Energy Conversion, Vol. 20, No. 2,

, pp. 292–299.

M. G. Simoes and F. A. Farret, “Renewable energy systems – design and

analysis with induction generators”, CRC Press, 2004.

T. F. Chan, “Steady-state analysis of self-excited induction genera-

tors”, IEEE Transactions on Energy Conversion, Vol. 9, No. 2, 1994,

pp. 288–296.

C. W. Taylor, “Power system voltage stability”, McGraw-Hill, NewYork,

S. S. Murthy and R. K. Ahuja, “Capacitive VAR and MPPT estimation

of wind driven self excited induction generators for decentralized power

generation using MATLAB graphical user interface based methodol-

ogy” IEEE International Conference of Power Electronics, Drives and

Energy Systems, Bengaluru, India, 2012.

S. N. Mahato, S. P. Singh and M. P. Sharma, “Capacitors required for

maximum power of s self-excited single-phase induction generator using

a three-phase machine”, IEEE Transactions on Energy Conversion,

Vol. 23, No. 2, 2008, pp. 372–381.

Singh GK, Senthil Kumar A, Saini RP. Performance evaluation of series

compensated self-excited six-phase induction generator for stand-alone

renewable energy generation. Energy 2010; 35:288–97.

Singh GK, Senthil Kumar A, Saini RP. “Selection of capacitance for

self-excited six-phase induction generator for stand-alone renewable

energy generation” Energy, Volume 35, Issue 8, 2010, Pages 3273–3283,

ISSN 0360-5442.

Singh GK, Senthil Kumar A, Saini RP. Performance analysis of a simple

shunt and series compensated six-phase self-excited induction generator

for stand-alone renewable energy generation. Energy Conversion and

Management, Volume 52, Issue 3, 2011, Pages 1688–1699, ISSN 0196-

Downloads

Published

2022-02-16

How to Cite

Ghosh, S. ., & Mahato, S. N. . (2022). Multi-variable Optimization Formulation for Maximum Power Transmission Capability of a Standalone Six-phase Induction Generator. Distributed Generation &Amp; Alternative Energy Journal, 37(3), 683–702. https://doi.org/10.13052/dgaej2156-3306.37314

Issue

Section

Articles