Numerical Simulation of Laminar Boundary Layer Flow Over a Horizontal Flat Plate in External Incompressible Viscous Fluid

Authors

  • Ali Belhocine Department of Mechanical Engineering, University of Sciences and the Technology of Oran, L.P 1505 El-MNAOUER, USTO 31000 ORAN (Algeria)
  • Nadica Stojanovic University of Kragujevac, Faculty of Engineering, Department for Motor Vehicles and Motors, 6 Sestre Janjić STR., 34000 Kragujevac, Serbia
  • Oday Ibraheem Abdullah System Technologies and Mechanical Design Methodology, Hamburg University of Technology, Hamburg, Germany

DOI:

https://doi.org/10.13052/ejcm2642-2085.30463

Keywords:

Similarity solution, boundary layer flow, isothermal flat plate, dimensionless temperature, heat transfer rate, thermal boundary layer thickness, Runge-Kutta method

Abstract

In this paper, steady laminar boundary layer flow of a Newtonian fluid over a flat plate in a uniform free stream was investigated numerically when the surface plate is heated by forced convection from the hot fluid. This flow is a good model of many situations involving flow over fins that are relatively widely spaced. All the solutions given here were with constant fluid properties and negligible viscous dissipation for two-dimensional, steady, incompressible laminar flow with zero pressure gradient. The similarity solution has shown its efficiency here to transform the governing equations of the thermal boundary layer into a nonlinear, third-order ordinary differential equation and solved numerically by using 4th-order Runge-Kutta method which in turn was programmed in FORTRAN language. The dimensionless temperature, velocity, and all boundary layer functions profiles were obtained and plotted in figures for different parameters entering into the problem. Several results of best approximations and expressions of important correlations relating to heat transfer rates were drawn in this study of which Prandtl’s number to the plate for physical interest was also discussed across the tables. The same case of solution procedure was made for a plane plate subjected to other thermal boundary conditions in a laminar flow. Finally, for the validation of the treated numerical model, the results obtained are in good agreement with those of the specialized literature, and comparison with available results in certain cases is excellent.

Downloads

Download data is not yet available.

Author Biographies

Ali Belhocine, Department of Mechanical Engineering, University of Sciences and the Technology of Oran, L.P 1505 El-MNAOUER, USTO 31000 ORAN (Algeria)

Ali Belhocine received his Magister degree in Mechanical Engineering in 2006 from Mascara University, Mascara, Algeria. After then, he was a PhD student at the University of Science and the Technology of Oran (USTO Oran), Algeria. He has recently obtained his Ph.D. degrees in Mechanical Engineering at the same University. His research interests include Automotive Braking Systems, Finite Element Method (FEM), ANSYS simulation, CFD Analysis, Heat Transfer, Thermal-Structural Analysis, Tribology and Contact Mechanic.

Nadica Stojanovic, University of Kragujevac, Faculty of Engineering, Department for Motor Vehicles and Motors, 6 Sestre Janjić STR., 34000 Kragujevac, Serbia

Nadica Stojanovic, Bachelor, Master degree obtained at the University of Kragujevac, Faculty of Engineering. Scientific fields – Motor vehicles and motors. Her research areas cover FE analysis, thermal-mechanical analysis, aerodynamics, ergonomics, and environmental science. Workplace – Assistant at the University of Kragujevac, Faculty of engineering. She participates in the project “Research on vehicle safety as part of the cybernetic system: driver – vehicle – environment” of the Ministry of Education, Science and Technological Development of the Republic of Serbia. Authorized by the Traffic Safety Agency for testing and control of imported vehicles and modified vehicles.

Oday Ibraheem Abdullah, System Technologies and Mechanical Design Methodology, Hamburg University of Technology, Hamburg, Germany

Oday Ibraheem Abdullah has obtained his M.Sc degree in Mechanical Eng./University of Baghdad in 2003. He is one of the faculty members in the Department of Energy Engineering/College of Engineering/University of Baghdad since 2002. Now he is a research associate in the System Technology and Mechanical Design Methodology/Hamburg University of Technology. His research interests cover Automobile Engineering, Automotive Industry, Design Engineering, CAD Design Optimization, Finite Element Analysis, Stress Analysis and Tribology.

References

Blasius H. Grenzschichten in Flüssigkeiten mit kleiner Reibung. Z Math Phys, 1908, 56:1–37

Howarth L. On the solution of the laminar boundary layer equations. Proc R Soc Lond Ser A, Math Phys Sci, 1938, 164:547–579

Wan Mohd Khairy Adly Wan Zaimi, Biliana Bidin, Nor Ashikin Abu Bakar and Rohana Abdul Hamid, Applications of Runge-Kutta-Fehlberg Method and Shooting Technique for Solving Classical Blasius Equation, World Applied Sciences Journal 17, (Special Issue of Applied Math): 10–15, 2012

Ganji, D.D., H. Babazadeh, F. Noori, M.M. Pirouz and M. Janipour. An Application of Homotopy Perturbation Method for Non-linear Blasius Equation to Boundary Layer Flow Over a Flat Plate. International Journal of Nonlinear Science, 2009, 7(4): 399–404.

Cortell, R. Numerical solutions of the classical Blasius flat-plate problem. Applied Mathematics and Computation, 2005, vol. 170, pp. 706–710.

Yu, L.-T., Chen, C.-K. The solution of the Blasius equation by the differential transformation method. Mathematical and Computer Modeling, 1998, vol. 28, pp. 101–111.

Chih-Wen Chang, Jiang-RenChang and Chein-Shan Liu, The Lie-Group Shooting Method for Solving Classical Blasius Flat-Plate Problem, Computers, Materials & Continua CMC, vol. 7, no. 3, pp. 139–153, 2008.

Utku Cem Karabulut, Alper Kiliç, Various techniques to solve Blasius equation, J. BAUN Inst. Sci. Technol., 20(3) Special Issue, 129–142, (2018).

A. Majidian, M. khaki, M. khazayinejad, Analytical Solution of Laminar Boundary Layer Equations Over A Flat Plate by Homotopy Perturbation Method, International Journal of Applied Mathematical Research, 1(4) (2012) 581–592.

Esmaeilpour, M. and D.D. Ganji. Application of He’s homotopy perturbation method to boundary layer flow and Convection heat transfer over a flat plate. Physics Letters A., 2007, 372(1): 33–38.

M. Fathizadeh, F. Rashidi, Boundary layer convective heat transfer with pressure gradient using Homotopy Perturbation Method (HPM) over a flat plate, Chaos, Solitons and Fractals 42 (2009), pp. 2413–2419.

Yang Zhou, Xiao-xue Hu, Ting Li, Dong-hai Zhang, Guo-qing Zhou, Similarity type of general solution for one-dimensional heat conduction in the cylindrical coordinate, International Journal of Heat and Mass Transfer 119 (2018) 542–550.

Li-Wu Fan, Zi-Qin Zhu, Min-Jie Liu, A similarity solution to unidirectional solidification of nano-enhanced phase change materials (NePCM) considering the mushy region effect, International Journal of Heat and Mass Transfer 86 (2015) 478–481.

Yutian Wang, Yiwen Li, Lianghua Xiao, Bailing Zhang, Yinghong Li, Similarity-solution-based improvement of γ

-Reθ

t model for hypersonic transition prediction, International Journal of Heat and Mass Transfer 124 (2018) 491–503.

S.K.S. Boetcher, E.M. Sparrow, Buoyancy-induced flow in an open-ended cavity: Assessment of a similarity solution and of numerical simulation model. International Journal of Heat and Mass Transfer 52(15–16) (2009), 3850–3856.

Z.C. Wang, D.W. Tang, X.G. Hu, Similarity solutions for flows and heat transfer in microchannels between two parallel plates. International Journal of Heat and Mass Transfer 54(11–12) (2011), 2349–2354.

V.R. Voller, A similarity solution for solidification of an under-cooled binary alloy, International Journal of Heat and Mass Transfer 49(11–12) (2006), 1981–1985.

V.R. Voller, A similarity solution for the solidification of a multicomponent alloy, International Journal of Heat and Mass Transfer 40(12) (1997), 2869–2877.

Shi-Jun Liao, Ioan Pop, Explicit analytic solution for similarity boundary layer equations, International Journal of Heat and Mass Transfer 47(1) (2004), 75–85.

A. Yevtushenko, S. Koniechny, Similarity solutions of stationary thermoelasticity with the frictional heating, International Journal of Heat and Mass Transfer 42(18) (1999), 3539–3544.

C.Y. Soong, G.J. Hwang, Effects of stress work on similarity solutions of mixed convection in rotating channels with wall-transpiration, International Journal of Heat and Mass Transfer 36(4) (1993), 845–856.

J. Filipovic, R. Viskanta, F.P. Incropera, Similarity solution for laminar film boiling over a moving isothermal surface, International Journal of Heat and Mass Transfer 36(12) (1993), 2957–2963.

Hsiao-Tsung Lin, Li-Kuo Lin, Similarity solutions for laminar forced convection heat transfer from wedges to fluids of any Prandtl number, International Journal of Heat and Mass Transfer 30(6) (1987), 1111–1118.

Christine Doughty, Karsten Pruess, A similarity solution for two-phase fluid and heat flow near high-level nuclear waste packages emplaced in porous media, International Journal of Heat and Mass Transfer 33(6) (1990), 1205–1222.

A.K. Kulkarni, H.R. Jacobs, J.J. Hwang, Similarity solution for natural convection flow over an isothermal vertical wall immersed in thermally stratified medium, International Journal of Heat and Mass Transfer 30(4) (1987), 691–698.

Ming-Jer Huang, Cha’o-Kuang Chen, Local similarity solutions of free convective heat transfer from a vertical plate to non-Newtonian power law fluids, International Journal of Heat and Mass Transfer 33(1) (1990), 119–125.

Asterios Pantokratoras, A note on natural convection along a convectively heated vertical plate, International Journal of Thermal Sciences 76 (2014), 221–224.

Yang Zhou, Kang Wang, Similarity solution for one-dimensional heat equation in spherical coordinates and its applications, International Journal of Thermal Sciences 140 (2019), 308–318.

Mohammad Mehdi Rashidi, NajibLaraqi, Seyed Majid Sadri, A novel analytical solution of mixed convection about an inclined flat plate embedded in a porous medium using the DTM-Padé, International Journal of Thermal Sciences 49(12) (2010), 2405–2412.

De-Yi Shang, Liang-Cai Zhong, A similarity transformation of velocity field and its application for an in-depth study on laminar free convection heat transfer of gases, International Journal of Thermal Sciences, 101 (2016), 106–115.

B. Weigand, A. Birkefeld, Similarity solutions of the entropy transport, International Journal of Thermal Sciences, 48(10) (2009), 1863–1869.

Shwin-Chung, Wong Shih-Han, Chu Ming-Hsuan Ai, Revisit on natural convection from vertical isothermal plate arrays II—3-D plume buoyancy effects, International Journal of Thermal Sciences, 126 (2018), 205–217.

Shwin-Chung, Wong Shih-Han, Chu, Revisit on natural convection from vertical isothermal plate arrays–effects of extra plume buoyancy, International Journal of Thermal Sciences, 120 (2017), 263–272.

Asterios Pantokratoras, Natural convection along a vertical isothermal plate with linear and non-linear Rosseland thermal radiation, International Journal of Thermal Sciences, 84 (2014), 151–157.

R. Muthucumaraswamy, P. Ganesan, V.M. Soundalgekar, On flow and heat transfer of a viscous incompressible fluid past an impulsively started vertical isothermal plate, International Journal of Thermal Sciences, 40(3) (2001), 297–302.

R.J. Goldstein, U. Madanan, T.H. Kuehn, Simplified correlations for free convection from a horizontal isothermal cylinder, Applied Thermal Engineering, 161 (2019), 113832.

David H. Schultz, Robert T. Balmer, Similarity solutions for the converging or diverging steady flow of non-newtonian elastic power law fluids with wall suction or injection—II Axisymmetric conical flow, Computers & Fluids, 6(4) (1978), 271–284.

Yulin Wu, Shuhong Liu, Hua-Shu Dou, Shangfeng Wu, Tiejun Chen, Numerical prediction and similarity study of pressure fluctuation in a prototype Kaplan turbine and the model turbine, Computers & Fluids, 56(15) (2012), 128–142.

Harry A. Dwyera, J. Grcarb, Solution of the Navier–Stokes equation with finite-differences on unstructured triangular meshes, Computers & Fluids, 27(5–6) (1998), 695–708.

Natalia C. Roşcaioan Pop, Unsteady boundary layer flow of a nanofluid past a moving surface in an external uniform free stream using Buongiorno’s model, Computers & Fluids, 95(22) (2014), 49–55.

Norfifah Bachok, Mihaela Anghel Jaradat and Ioan Pop, A similarity solution for the flow and heat transfer over a moving permeable flat plate in a parallel free stream. Heat and Mass Transfer, 47 (2011), 1643.

J. R. Fan, J. M. Shi and X. Z. Xu, Similarity solution of mixed convection over a horizontal moving plate, Heat and Mass Transfer, 32 (1997), 199–206.

J. Fan, J. Shi and X. Xu, Similarity solution of free convective boundary-layer behavior at a stretching surface, Heat and Mass Transfer, 35 (1999), 191–196.

M. A. Chaudhary, J. H. Merkin and I. Pop, Similarity solutions in free convection boundary-layer flows adjacent to vertical permeable surfaces in porous media: II prescribed surface heat flux, Heat and Mass Transfer, 30 (1995), 341–347.

Ali Al-Mudhaf and Ali J. Chamkha, Similarity solutions for MHD thermosolutal Marangoni convection over a flat surface in the presence of heat generation or absorption effects, Heat and Mass Transfer, 42 (2005), 112–121.

A. A. Mohammadein, Similarity analysis of axisymmetric free convection on a horizontal infinite plate subject to a mixed thermal boundary condition in a micropolar fluid, Heat and Mass Transfer, 36 (2000), 209–212.

Ali J. Chamkha and Abdul-Rahim A. Khaled, Similarity solutions for hydromagnetic simultaneous heat and mass transfer by natural convection from an inclined plate with internal heat generation or absorption, Heat and Mass Transfer, 37 (2001), 117–123.

Tiegang Fang, Similarity solution of thermal boundary layers for laminar narrow axisymmetric jets, International Journal of Heat and Fluid Flow, 23 (2002), 840–843.

D. Ewing, Two-point similarity in turbulent planar jet flows, International Journal of Heat and Fluid Flow, 67(Part B) (2017), 131–138.

T. Yilmaz, Numerical solution of Navier-stokes equations for laminar fluid flow in rows of plates in staggered arrangement, International Journal of Heat and Fluid Flow, 3(4) (1982), 201–206.

Gabriclla Bognär, Similarity solution of boundary layer flows for non-Newtonian fluids, International Journal of Nonlinear Sciences & Numerical Simulation, 10(11–12) (2009), 1555–1566.

Ali Belhocine and Wan Zaidi Wan Omar. An analytical method for solving exact solutions of the convective heat transfer in fully developed laminar flow through a circular tube, Heat Transfer Asian Research, 46(8) (2017), 1342–1353.

Ali Belhocine and Wan Zaidi Wan Omar. Numerical study of heat convective mass transfer in a fully developed laminar flow with constant wall temperature, Case Studies in Thermal Engineering, 6 (2015), 43–60.

Ali Belhocine and Oday Ibraheem Abdullah, Numerical simulation of thermally developing turbulent flow through a cylindrical tube, Int. J. Adv. Manuf. Technol. 102(5–8) (2019), 2001–2012.

Ali Belhocine and Wan Zaidi Wan Omar. Analytical solution and and numerical simulation of the generalized Levèque equation to predict the thermal boundary layer, Mathematics and Computers in Simulation. 180 (2021), 43–60.

H Aminikhah, Analytical Approximation to the Solution of Nonlinear Blasius’ Viscous Flow Equation by LTNHPM, ISRN Mathematical Analysis 2012, pp. 1–10.

H. Aminikhah and S. Kazemi? Numerical Solution of the Blasius Viscous Flow Problem by Quartic B-Spline Method, International Journal of Engineering Mathematics, 2016, 1–6.

S. A. Lal and N. M. Paul, “An accurate taylors series solution with high radius of convergence for the Blasius function and parameters of asymptotic variation,” Journal of Applied Fluid Mechanics, vol. 7, no. 4, pp. 557–564, 2014.

A. Noghrehabadi, M. Ghalambaz and A. Samimi, Approximate solution of laminar thermal boundary layer over a thin plate heated from below by convection, Journal of Computational and Applied Research in Mechanical Engineering, 2(2) (2013), 45–57.

Published

2021-11-27

How to Cite

Belhocine, A., Stojanovic, N. ., & Abdullah, O. I. . (2021). Numerical Simulation of Laminar Boundary Layer Flow Over a Horizontal Flat Plate in External Incompressible Viscous Fluid. European Journal of Computational Mechanics, 30(4-6), 337–386. https://doi.org/10.13052/ejcm2642-2085.30463

Issue

Section

Original Article