Probabilistic Oblique Impact Analysis of Functionally Graded Plates – A Multivariate Adaptive Regression Splines Approach

Authors

  • P. K. Karsh Department of Mechanical Engineering, Parul Institute of Engineering & Technology, Parul University, Vadodara, India https://orcid.org/0000-0003-3522-3207
  • Bindi Thakkar Department of Mechanical Engineering, Parul Institute of Engineering & Technology, Parul University, Vadodara, India
  • R. R. Kumar Department of Aeronautical Engineering; Hindustan Institute of Technology and Science, Chennai, India https://orcid.org/0000-0002-9725-727X
  • Vaishali Department of Mechanical Engineering, National Institute of Technology Silchar, India https://orcid.org/0000-0002-3503-0977
  • Sudip Dey Department of Mechanical Engineering, National Institute of Technology Silchar, India

DOI:

https://doi.org/10.13052/ejcm2642-2085.30234

Keywords:

Uncertain parameter; Low-velocity impact; Functionally graded materials (FGM); Monte Carlo simulation (MCS); Multivariate Adaptive Regression Splines (MARS).

Abstract

Purpose: To investigate the probabilistic low-velocity impact of functionally graded (FG) plate using the MARS model, considering uncertain system parameters.

Design/methodology/application: The distribution of various material properties throughout FG plate thickness is calculated using power law. For finite element (FE) formulation, isoparametric elements with eight nodes are considered, each component has five degrees of freedom. The combined effect of variability in material properties such as elastic modulus, modulus of rigidity, Poisson’s ratio, and mass density are considered. The surrogate model is validated with the FE model represented by the scatter plot and the probability density function (PDF) plot based on Monte Carlo simulation (MCS).

Findings: The outcome of the degree of stochasticity, impact angle, impactor’s velocity, impactor’s mass density, and point of impact on the maximum value of contact force (CFmax

), plate deformation (PDmax), and impactor deformation (IDmax

) are determined. A convergence study is also performed to determine the optimal number of the constructed MARS model’s sample size.

Originality/value: The results illustrate the significant effects of uncertain input parameters on FGM plates’ low-velocity impact responses by employing a surrogate-based MARS model.

Downloads

Download data is not yet available.

Author Biographies

P. K. Karsh, Department of Mechanical Engineering, Parul Institute of Engineering & Technology, Parul University, Vadodara, India

P. K. Karsh received the bachelor’s degree in Industrial and Produnction Engineering from Guru Ghasdas Central University, Bilaspur, India in 2012, the master’s degree in Industrial and Produnction Engineering from Natioal Institute of Technology, Kurukshetra, India in 2016, and the philosophy of doctorate degree in Mehcnaical Engineering from Natioal Institute of Technology Silchar, India in 2019, respectively. He is currently working as an Assistant Professor at the Department of Mechanical Engineering, Faculty of Engineering & Technology, Parul University, India. His research areas include, stochastic free vibration analysis, impact analysis and failure analysis of composite and functionally graded materials. He has been serving as a reviewer for many highly-respected journals.

Bindi Thakkar, Department of Mechanical Engineering, Parul Institute of Engineering & Technology, Parul University, Vadodara, India

Bindi Thakkar received the bachelor’s degree in Industrial and Mechanical Engineering from D. Y. Patil College of Engineering Pune, India in 2006, the master’s degree in CAD/CAM from Bharti Vidhyapeeth University, Pine India in 2009, and pursuing PhD in Design and Manufacturing from Parul University in 2020 respectively. She is currently working as Head of the Department and Assistant Professor at the Department of Mechanical Engineering, Faculty of Engineering & Technology, Diploma Studies, Parul University, India. She has 14 years of teaching experience at Parul University, since 2008. Her research areas include, Composites, stochastic free vibration analysis, impact analysis and failure analysis of composite and functionally graded materials.

R. R. Kumar, Department of Aeronautical Engineering; Hindustan Institute of Technology and Science, Chennai, India

R. R. Kumar received the bachelor’s degree in Mechanical Engineering from Rajasthan Technical University, Kota, India in 2014, the master degree in Mechanical Engineering from National Institute of Technology, Silchar, India in 2016, and the doctor of Philosophy degree in Mechanical Engineering from National Institute of Technology Silchar, India in 2019, respectively. His research area includes: composite structure, stochastic analysis, surrogate modelling, impact analysis, vibration analysis and computational mechanics. He has been serving as a reviewer for several international journals.

Vaishali, Department of Mechanical Engineering, National Institute of Technology Silchar, India

Vaishali received the bachelor’s degree in Mechanical Engineering from Noida Institute of Engineering and Technology, Greater Noida, India in 2014, the master’s degree in Materials and Manufacturing Technology from National Institute of Technology, Silchar, India in 2018. She is currently pursuing her philosophy of doctorate degree in Mehcnaical Engineering from National Institute of Technology Silchar, India. Her research areas include, stochastic free vibration analysis, impact analysis, functionally graded materials, sandwich structures and hybrid structures.

Sudip Dey, Department of Mechanical Engineering, National Institute of Technology Silchar, India

Sudip Dey is a faculty in the Mechanical Engineering Department of National Institute of Technology Silchar, India. Previously, He was a Post-doctoral Researcher at Leibniz-Institut für Polymerforschung Dresden e. V., Germany. Prior to that he was a Post-doctoral Researcher at College of Engineering, Swansea University, United Kingdom. He obtained Bachelor in Mechanical Engineering Degree from Jadavpur University, India. He received Ph.D. (Engg.) degree from Jadavpur University, India. His field of specialization is Applied Mechanics and Design. He has more than fifteen years of experience in research, teaching, industrial and professional activities. He is actively engaged in academics, teaching, research and industrial projects. His research interests include molecular dynamics, multi-scale and computational investigation of fibre-matrix interaction, uncertainty quantification, mechanics of composite and functionally graded structures, finite element analyses, digital twin with an emphasis on computational modelling.

References

Apetre, N. A., Sankar, B. V., and Ambur, D. R., (2006), “Low-velocity impact response of sandwich beams with functionally graded core, International Journal of Solids and Structures, Vol. 43 No. 9, pp. 2479–2496.

Atmane, H. A., Tounsi, A., Ziane, N., and Mechab, I. (2011), “Mathematical solution for free vibration of sigmoid functionally graded beams with varying cross-section”, Steel and Composite Structures, 11(6), 489–504.

Bathe, KJ, (1990), Finite Element Procedures in Engineering Analysis. PHI, New Delhi, India.

Belkorissat, I., Houari, M. S. A., Tounsi, A., Bedia, E. A., and Mahmoud, S. R. (2015). “On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model”. Steel Compos. Struct, 18(4), 1063–1081.

Chaht, F. L., Kaci, A., Houari, M. S. A., Tounsi, A., Bég, O. A., and Mahmoud, S. R. (2015). “Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect”. Steel and Composite Structures, 18(2), 425–442.

Chelu, P. and Librescu, L., (2006), “Low-velocity impact on a functionally graded circular thin plate”, In ASME 8th Biennial Conference on Engineering Systems Design and Analysis, American Society of Mechanical Engineers, pp. 791–800.

Darilmaz, K. (2015), “Vibration analysis of functionally graded material (FGM) grid systems”, Steel and Composite Structures, 18(2), 395–408.

Dey S., Karmakar A. (2014), “Effect of oblique angle on low velocity impact response of delaminated composite conical shells”, Journal of Mechanical Engineering Science Proc IMechE Part C, Vol. 228(15), pp. 2663–2677.

Dey, S. and Karmakar, A., (2014a), “Effect of oblique angle on low velocity impact response of delaminated composite conical shells”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 228, No. 15, pp. 2663–2677.

Dey, S. and Karmakar, A., (2014b), “Time dependent response of low velocity impact induced composite conical shells under multiple delamination”, Mechanics of Time-Dependent Materials, Vol. 18 No. 1, pp. 55–79.

Dey, S., Adhikari, S. and Karmakar, A., (2015), “Impact response of functionally graded conical shells”, Latin American Journal of Solids and Structures, Vol. 12 No. 1, pp. 133–152.

Dey, S., Mukhopadhyay, T., Naskar, S., Dey, T. K., Chalak, H. D. and Adhikari, S., (2016) “Probabilistic characterisation for dynamics and stability of laminated soft core sandwich plates”, Journal of Sandwich Structures & Materials, p. 1099636217694229.

Etemadi, E., Khatibi, A.A. and Takaffoli, M., (2009), “3D finite element simulation of sandwich panels with a functionally graded core subjected to low velocity impact”, Composite Structures, Vol. 89 No. 1, pp. 28–34.

Fekrar, A., El Meiche, N., Bessaim, A., Tounsi, A., and Adda Bedia, E. A. (2012). “Buckling analysis of functionally graded hybrid composite plates using a new four variable refined plate theory”. Steel and Composite Structures, 13(1), 91–107.

Friedman, J. H., (1991), “Multivariate adaptive regression splines”, The annals of statistics, Vol. 19, No. 1, pp. 1–67.

Fu, Y., Hu, S. and Mao, Y., (2016), “Nonlinear low-velocity impact analysis of functionally graded shallow spherical shells in thermal environments”, Journal of Thermoplastic Composite Materials, Vol. 29, No. 5, pp. 680–703.

Gong, S. W., Lam, K. A. and Reddy, J.N., (1999), “The elastic response of functionally graded cylindrical shells to low-velocity impact”, International Journal of Impact Engineering, Vol. 22 No. 4, pp. 397–417.

He, W., Yao, L., Meng, X., Sun, G., Xie, D. and Liu, J., (2019), “Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets”, Thin-Walled Structures, Vol. 137, pp. 411–432.

Hou, Y., Tie, Y., Li, C., Sapanathan, T. and Rachik, M., (2019), “Low-velocity impact behaviors of repaired CFRP laminates: Effect of impact location and external patch configurations”, Composites Part B: Engineering, Vol. 163, pp. 669–680.

Karsh, P. K., Mukhopadhyay, T., Dey, S., (2018c), “Stochastic dynamic analysis of twisted functionally graded plates”, Composites Part B: Engineering, Vol. 147, pp. 259–278.

Karsh, P. K., Mukhopadhyay, T. and Dey, S., (2018a), “Spatial vulnerability analysis for the first ply failure strength of composite laminates including effect of delamination”, Composite Structures, Vol. 184, pp. 554–567.

Karsh, P. K., Mukhopadhyay, T. and Dey, S., (2018b), “Stochastic Investigation of Natural Frequency for Functionally Graded Plates”, In IOP Conference Series: Materials Science and Engineering, Vol. 326, No. 1, p. 012003.

Karsh, P. K., Mukhopadhyay, T. and Dey, S., (2019), “Stochastic low-velocity impact on functionally graded plates: Probabilistic and non-probabilistic uncertainty quantification”, Composites Part B: Engineering, Vol. 159, pp. 461–480.

Kiani Y., Sadighi M., Salami S. J, and Eslami MR, (2013), “Low velocity impact response of thick FGM beams with general boundary conditions in thermal field”, Composite Structures, Vol. 104, pp. 293–303.

Kumar, R. R., Mukhopadhyay, T., Pandey, K. M. and Dey, S., (2019), “Stochastic buckling analysis of sandwich plates: The importance of higher-order modes”, International Journal of Mechanical Sciences, Vol. 152, pp. 630–643.

Larson, Reid A., Palazotto A. (2006), Low velocity impact analysis of functionally graded circular plates. In ASME 2006 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, pp. 571–580.

Loy, C. T., Lam, K. Y., Reddy, J. N. (1999), Vibration of functionally graded cylindrical shells, International Journal of Mechanical Sciences, vol. 41, pp. 309–324.

Mars, J., Chebbi, E., Wali, M. and Dammak, F., (2018), “Numerical and experimental investigations of low velocity impact on glass fiber-reinforced polyamide”, Composites Part B: Engineering, Vol. 146, pp. 116–123.

Mukhopadhyay, T., Naskar, S., Karsh, P. K., Dey, S. and You, Z., (2018), “Effect of delamination on the stochastic natural frequencies of composite laminates”, Composites Part B: Engineering, Vol. 154, pp. 242–256.

Shariyat, M., Nasab, F. F., (2014), Low-velocity impact analysis of the hierarchical viscoelastic FGM plates, using an explicit shear-bending decomposition theory and the new DQ method. Composite Structures, Vol. 113, pp. 63–73.

Shariyat, M., and Jafari, R., (2013a), “Nonlinear low-velocity impact response analysis of a radially preloaded two-directional-functionally graded circular plate: A refined contact stiffness approach”, Composites Part B: Engineering, Vol. 45, No. 1, pp. 981–994.

Shariyat, M., and Jafari, R., (2013b), “A micromechanical approach for semi-analytical low-velocity impact analysis of a bidirectional functionally graded circular plate resting on an elastic foundation”, Meccanica, Vol. 48, No. 9, pp. 2127–2148.

Singh, H., Hazarika, B. C., and Dey, S., (2017), “Low velocity impact responses of functionally graded plates”, Procedia engineering, Vol. 173, pp. 264–270.

Sun, C. T., Chen, J. K., (1985), On the impact of initially stressed composite laminates. Composite Materials, Vol. 19, pp. 490–504.

Tebboune, W., Benrahou, K. H., Houari, M. S. A., and Tounsi, A. (2015). “Thermal buckling analysis of FG plates resting on elastic foundation based on an efficient and simple trigonometric shear displacement theory”. Steel and Composite Structures, 18(2), 443–465.

Zhang, W., and Goh, A. T., (2016), “Multivariate adaptive regression splines and neural network models for prediction of pile drivability”, Geoscience Frontiers, Vol. 7 No. 1, pp. 45–52.

Published

2021-10-09

How to Cite

Karsh, P. K., Thakkar, B., Kumar, R. R., Vaishali, & Dey, S. (2021). Probabilistic Oblique Impact Analysis of Functionally Graded Plates – A Multivariate Adaptive Regression Splines Approach. European Journal of Computational Mechanics, 30(2-3), 223–254. https://doi.org/10.13052/ejcm2642-2085.30234

Issue

Section

Original Article

Most read articles by the same author(s)