A RELIABLE MATRIX CONVERTER FED INDUCTION MOTOR DRIVE SYSTEM BASED ON PARAMETER PLANE SYNTHESIS METHOD
Keywords:
Matrix Converter, Reliability, Induction Machine, D-Partition Technique.Abstract
The paper presents a novel technique for designing Proportional Integral (PI) controller parameters for a reliable closed loop operation of Matrix Converter (MC) fed Induction Motor Drive (IMD). Parameter plane synthesis method is used to find the stable region in PI parameter plane. Small signal stability of the system is tested by perturbation along the stable point. The frequency scanning technique is used to confirm the stability of the region in parametric plane. The theoretical investigations have been carried out for analyzing the steady state and transient behavior of the proposed drive system and compared with the conventional Ziegler-Nichols method.
Downloads
References
Bose, B.K. (1997). Power electronics and variable frequency drives, New
Jersey, IEEE press Piscataway.
Wheeler, P. and Zhang, H. (1994). A theoretical and practical consideration
of optimised input filter design for a low loss matrix converter, 9th
International Conference on Electromagnetic Compatibility, p. 138-142.
Wheeler, P.W., Rodriguez, J., Clare, J.C., Empringham, L. and Weinstein, A.
(2002). Matrix converters: a technology review, IEEE Transactions on
Industrial Electronics, 49(2), p. 276-288.
Nieniewski, M.J. and Marleau, R.S. (1987). Mathematical modeling of a
digital current control loop for electrical drives, IEEE Transaction on
Industrial Electronics, 34(1), p. 107-114.
O'Dwyer, A. (2009). Handbook of PI and PID controller tuning rules, World
Scientific.
Yu, C.-C. (2006). Autotuning of PID controllers: A relay feedback approach,
Springer Science & Business Media.
Lee, C.-H. (2004). A survey of PID controller design based on gain and phase
margins, International Journal of Computational Cognition, 2(3), p. 63-100.
Altun, H. and Sünter, S. (2003). Matrix converter induction motor drive:
modeling, simulation and control, Electrical Engineering, 86(1), p. 25-33.
Hongwu, S., Hua, L., Xingwei, W. and Limin, Y. (2010). Vector control of
induction motor based on output voltage compensation of matrix converter,
Energy Conversion Congress and Exposition (ECCE), p. 1851-1858.
Siljak, D. (1964). Analysis and Synthesis of Feedback Control Systems in the
Parameter Plane I-Linear Continuous Systems, IEEE Transactions on
Applications and Industry, 83(75), p. 449-458.
Siljak, D.D. (1969). Nonlinear Systems-The Parameter Analysis and Design.
Hwang, C., Hwang, L.F. and Hwang, J.H. (2010). Robust D‐partition, Journal
of the Chinese Institute of Engineers, 33(6), p. 811-821.
Hwang, C. and Hwang, J.-H. (2004). Stabilisation of first-order plus dead-
time unstable processes using PID controllers, IEE Proceedings-Control
Theory and Applications, 151(1), p. 89-94.
Agarwal, P. and Verma, V. (2001). Parameter Plane Synthesis of a Current
Source Inverter Fed Induction Motor Drive, Journal Institution of Engineers
India- Electrical Engineering Division, p. 211-219.
Agarwal, P. and Verma, V. (1992). Synthesis and performance of digitally
controlled current source, Electric Machines & Power Systems, 20(2), p. 149-
U. Ahmad, D.K., S (1999). Design and analysis of pulse-width modulated
closed-loop DC drive torsional system using parameter plane technique,
Electric Machines &Power Systems, 27(8), p. 833-848.
