A Strategic Environmental Management System (SEMS) Innovation-Both Entrepreneurial and Technological-Is the Key
Abstract
Leading companies in the world are on a path to a new environ-
mental protection strategy based on pollution prevention, clean tech-
nologies, and environmentally responsible products. This new strat-
egy requires the full participation of everyone in the organization,
supported by an aggressive entrepreneurial and technological innova-
tion effort.
Downloads
References
Kolluru, R.V., (ed), “Environmental Strategies Handbook: A Guide to Effective
Policies and Practices,” McGraw-Hill, New York, 1994.
Buchholz, R., “Principles of Environmental Management: The Greening of Busi-
ness,” Prentice Hall, Englewood Cliffs, MD, 1993.
Keolcian, G.A., “Pollution Prevention through Life-Cycle Design,” Chapter 18 in
Freeman, H.M., op. cit. in Ref. 27.
Henn, C.L. And Fava, J.A., “Life Cycle Analysis and Resource Management,”
Chapter 14 in Kolluru, R.V., op. cit. in Ref. 1.
Hirschhorn, J.S., “Business and the Environment” Chapter 2 in Kolluru, R. V.,
Environmental Strategies Handbook, McGraw-Hill, 1993.
Schmidheiny, S. and Business Council for Sustainable Development, “Changing
Course: A Global Business Perspective on Business and the Environment,” MIT
Press, Cambridge, 1992.
Arthur D. Little Inc., “Sustainable Development: How Real, How Soon, and Who’s
Doing What,” Prism, Fourth Quarter, 1998.
Arthur D. Little Inc., “Seizing Strategic Environmental Advantage: A Life Cycle
Approach,” Cambridge, Mass, 1991.
Silverstein, M., “Environmental Economic Revolution,” St. Martin’s Press, New
York, 1993.
United Nations Centre on Transnational Corporations (UNCTC), “Criteria for
Sustainable Development Management,” New York, 1991.
Costanza, R. (ed.), “Ecological Economics: The Science and Management of
Sustainability,” Columbia University Press, New York, 1991.
World Commission on Environment and Development, “Our Common Future,”
Oxford University Press, New York, 1987.
Arthur D. Little, Inc., “Achieving Environmental Excellence: Ten Tools for CEO,”
The Best of Prism, 1993.
Office of Technology Assessment, U.S. Congress, “Green Products by Design,
Choices for a Cleaner Environment,” Sept., 1992.
Arthur D. Little, Inc., “Improved Products through Design for Environment
Tools,” The Best of Prism 11, 1996.
Keoleian, G.A., and Menerey D., “Life Cycle Design Guidance Manual: Environ-
mental Requirements and the Product System,” EPA/600/R-92/226, U.S. EPA,
Winter 2001-02, Vol. 21, No. 3
Keoleian, G. and Dan Menerey, “Sustainable Development by Design: Review of
Life Cycle Design and Related Approaches,” Journal of Air and Waste Manage-
ment Association, 44 (5): 645-648, 1994.
Baker, G.E., “Pollution Prevention and Total Quality Management,” Chapter 9 in
Freeman, H.M., op. cit. in Ref 27.
Bringer, R.P. And Benfordo, D.M., “Pollution Prevention and Total Quality Man-
agement,” Chapter. 6 in Kolluru, R.V., op. cit. in Ref. 1.
Drummond, H., “The Quality Movement,” Kogan Page Limited, London, 1992.
Dale, B.G. (ed)., “Managing Quality,” Prentice Hall, UK, Second Edition, 1994.
Deming, W.E., “Quality, Productivity, and Competitive Position,” MIT-Center for
Advanced Engineering Study, Cambridge, Mass., 1982.
U.S. Environmental Protection Agency, “Environmental Protection Agency Pollu-
tion Prevention Directive,” May 13, 1990.
Oliver, J.J., and Anthony, D.B., “Pollution Prevention—A Global Perspective,”
Hydrocarbon Processing, Nov. 1994.
U.S. Environmental Protection Agency, “Facility Pollution Prevention Guide,”
EPA/600/R-92/088, May 1992.
Graedel, T.E. and Allenby, B.R., “Industrial Ecology,” Prentice Hall, 1995.
Freeman, H.M. (ed), “Industrial Pollution Prevention Handbook,” McGraw-Hill,
New York, 1995.
“Improving Performance in the Chemical Industry: Ten Steps for Pollution Pre-
vention,” Chemical Manufacturers Association, Washington, D.C.
Theodore, L. and McGuinn, Y.C., “Pollution Prevention,” Van Nostrand Reinhold,
New York, 1992
Corbitt, R.A. (ed.), “Standard Handbook of Environmental Engineering,”
McGraw-Hill, 1990.
Mulholland, K.L. and Dyer, J.A., “Reduce Waste and Make Money,” Chemical
Engineering Progress, January 2000.
Nelson, K.E., “Process Modifications that Reduce Waste,” AICHE, 1991.
Chemical Manufacturers Association, “Designing Pollution Prevention into the
Process: Research, Development, and Engineering,” CMA, May 1993.
Illman, D.L., “Green Technologies Present Challenge to Chemists,” Chemical arid
Engineering News, Sept. 6, 1993.
Breen, J.J., and Dellarco, M.J., “Pollution Prevention in Industrial Processes: The
Role of Process Analytical Chemistry,” ACS, Series 508, 1992.
King, J., “Separation Processes,” McGraw-Hill, New York, 1971.
Green, D.W., and Maloney, J.O., “Perry’s Chemical Engineers Handbook,”
McGraw-Hill, New York, 1978.
Berglund, R.L., and Lawson, C.T., “Pollution Prevention in the CPF, Chemical
Engineering, Sept. 18, 1991.
Hyland, R.P., “Environmental and Maintenance: Strategies for the 1990’s,” Hydro-
carbon Processing, May 1991.
National Office Products Association, “Resource Guide to Office “Products Manu-
facturers’ Recycling Programs and Products,” USA, 1991.
Commission on Environmental Quality—Solid Waste Task Force, “Workplace
Waste Reduction Guide,” US. Government, 1993.
Down, R.D., “Environmental Control Systems,” ISA Publications, 1992.
Waste Minimization-Opportunity Assessment Manual, EPA, 1988.
Mobley, T., “Turning Maintenance Dollars into Bottom-Line Profits,” CPI Equip-
ment Reporter, May-June, 1988.
Strategic Planning for Energy and the Environment
Early, W.F. and Edison, M.A. “Design for Zero Releases,” Hydrocarbon Process-
ing, August 1990.
Berglund, R.L. and Snyder, G.E., “Minimize Waste During Design,” Hydrocarbon
Processing, April 1990.
Rase, H.F., “Chemical Reactor Design of Process Plants,” 2 vols., Wiley, New York,
Ashbrook, P., Klein-Banay, C., and Maier, Ch., “Pollution Prevention in Laborato-
ries: The How-to Guide,” University of Illinois, 1992.
Tropp, R.I., “More Efficient Turnarounds,” Hydrocarbon Processing, January 1986.
Murrill, P.W., “Application Concepts of Process Control,” ISA Publications, 1988.
Allenby, B.R. and Fullerton, A., “Design for Environment—A New Strategy for
Environmental Management,” Pollution Prevention Review, Winter 1991-1992.
Organization for Economic Cooperation and Development, “Environmental La-
beling in OECD Countries,” OECD, Paris, 1991.
Thompson Publishing Group, “Environmental Packaging: U.S. Guide to Green
Labeling, Packaging, and Recycling,” Washington, D.C., 1993.
Arthur D. Little, Inc., “Findings of the Arthur D. Little Global Survey on Innova-
tion,” 1997.
Burgelman, R.A., Maidique, M.A., and Wheelwright, S.C., “Strategic Management
of Technology and Innovation,” Ed. Irwin, 1995.
Tushman, M.L., and Anderson, P., “Managing Strategic Innovation and Change,”
Oxford University Press, 1997.
https://aeeeuropeenergy.com/
