Broad-Band and Wide Scan Phased Array Element Design Using Data Mining

Authors

  • Golamreza Dadashzadeh Department of Electrical and Electronic Engineering Shahed University, Tehran, 0098, IRAN
  • Mohammad Kargar Department of Electrical and Electronic Engineering Shahed University, Tehran, 0098, IRAN
  • Yalda Torabi Department of Electrical and Electronic Engineering Shahed University, Tehran, 0098, IRAN
  • Bahman Rahmati Department of Electrical and Electronic Engineering Shahed University, Tehran, 0098, IRAN

Keywords:

Broad-band antennas, data mining, phased array, shorting posts

Abstract

Novel synthesis procedure, exploiting data mining technique for antenna design is presented. By utilizing data mining, investigating various combinations of a typical antenna configuration, all together, is feasible and this fact allows the selection of the specific design which possesses the desired properties. In this paper, a broad-band and wide scanning angle probe-fed microstrip patch array element with shorting posts is designed based on this procedure. For achieving acceptable bandwidth, scan angle and polarization, the coordination positions and the number of the incorporated shorting posts were considered as the design parameters. For a substrate with a thickness of 0.05?0, the simulation results show a 15% frequency bandwidth with a scanning range of 70? in the main E, H and D-planes.

Downloads

Download data is not yet available.

References

A. Ellgardt and H. Steyskal, “Antenna elements for wide-angle phased arrays,” Division of Electromagnetic Theory, Royal Institute of Technology, Tech. Rep., 2005.

B. Thors, H. Steyskal, and H. Holter, “Broad-band fragmented aperture phased array element design using genetic algorithms,” Antennas and Propagation, IEEE Transactions on, vol. 53, no. 10, pp. 3280-3287, Oct. 2005.

A. Ellgardt and A. Wikström, “A single polarized triangular grid tapered-slot array antenna,” IEEE Transaction on Antennas and Propagation, vol. 57, no. 9, Sept. 2009.

L.-G. Huss, R. Gunnarsson, P. Andersson, and R. Erickson, “Wideband, wide angle scan, microstrip array antenna element,” European Microwave Conf., Paris, Oct. 2005.

C.-C. Liu, A. Hessel, and J. Shmoys, “Performance of probe-fed microstrip-patch element phased arrays,” Antennas and Propagation, IEEE Transactions on, vol. 36, no. 8, pp. 1501-1509, Aug. 1988.

R. B. Waterhouse, “The use of shorting posts to improve the scanning range of probe fed microstrip patch phased arrays,” IEEE Trans. Antennas Propagat., vol. 44, pp. 302-309, Mar. 1996.

R. B. Waterhouse and N. V. Shuley, “Scan performance of infinite arrays of microstrip elements loaded with varactor diodes,” IEEE Trans. Antennas Propagat., vol. 41, pp. 1273- 1280, Sept. 1993.

S. Chattopadhyay, “Rectangular microstrip patch on a composite dielectric substrate for high-gain wide-beam radiation patterns, antennas and propagation,” IEEE Trans. Antennas Propagat., vol. 57, no. 10, pp. 3325-3328, Oct. 2009.

J. Han and M. Kamber, Data Mining: Concepts and Techniques, Second Edition, Elsevier Inc., 2006.

D. Zhang and L. Zhou, “Discovering golden nuggets: data mining in financial application,” IEEE Trans. on Systems, Man, and Cybernetics, vol. 34, no. 4, Nov. 2004.

D. Lian, X. Lida, G. Feng, L. Jun, and Y. Baopin, “A local-density based spatial clustering algorithm with noise,” Inf. Syst., vol. 32, pp. 978-986, Nov. 2007.

Ansoft High Frequency Structure Simulation (HFSS), ver. 11.1, Ansoft Corporation, 2008.

CST Microwave Studio, ver. 2015, Computer Simulation Technology, 2015.

D. Pelleg and A. Moore, “X-means: extended Kmeans with efficient fstimation of the number of clusters,” Proc. of the 17th International Conference on Machine Leaning, pp. 727-734, 2000.

S. Ramaswamy, R. Rastogi, and S. Kyuseok, “Efficient algorithms for mining outliers from large data sets,” Proc. ACM SIGMOD Int., Conf. on Management of Data, 2000.

Downloads

Published

2021-08-18

How to Cite

[1]
G. . Dadashzadeh, M. . Kargar, Y. . Torabi, and B. . Rahmati, “Broad-Band and Wide Scan Phased Array Element Design Using Data Mining”, ACES Journal, vol. 31, no. 03, pp. 244–251, Aug. 2021.

Issue

Section

General Submission