Compact Band-Stop X-Band Filter Using Triple Meander-Line-Ring Defected Ground Structures

Authors

  • Hamid Keivani Department of Electrical Engineering Kazerun Branch, Islamic Azad University, Kazerun, Iran
  • Nahid Adlband Department of Electrical Engineering Kazerun Branch, Islamic Azad University, Kazerun, Iran
  • Yasser Ojaroudi Young Researchers and Elite Club Germi Branch, Islamic Azad University, Germi, Iran

Keywords:

Band-stop filter, meander-line structure, radar system, X-band application

Abstract

This paper work deals with design and development of compact microstrip band-stop filter (BSF) for radar applications. The microstrip filter configuration consists of a transmission line and a modified ground plane with three meander-line ring defected ground structures (DGS). The proposed microstrip filter fabricated on a Rogers RT/Duroid 5880 substrate with a relative dielectric constant of 2.2 and has a very small size of 10×15×0.635 mm3 . The proposed BSF has a flat impedance bandwidth of 8-12 GHz with an insertion loss which is larger than 35 dB and a return loss which is less than 0.5 dB at the center of the band-stop frequency range. The operating frequencies of the filter can be easily controlled by changing the dimensions of the meander-line rings without changing the area taken up by the structures. The introduced filter has an excellent out-of-band performance. A good agreement between measured and simulated results was obtained. The proposed filters are promising for use in wireless technologies for radar communications due to their simple structure, compact size, and excellent performance.

Downloads

Download data is not yet available.

References

G. L. Matthaei, L. Young, and E. M. T. Jones, Microwave Filters, Impedance-Matching Network, and Coupling Structures, Norwood, MA, Artech House, 1980.

J. A. Kong, Electromanetic Wave Theory, EMW Publishing, Cambridge, 2000.

K. L. Finch and N. G. Alexopoulos, “Shunt posts in microstrip transmission lines,” IEEE Trans. Microwave Theory Tech., vol. MMT.-38, pp. 1585-1594, 1990.

D. S. La, Y. H. Lu, S. Y. Sun, N. Liu, and J. L. Zhang, “A novel compact band stop filter using defected microstrip structure,” Microw. Opt. Technol. Lett., vol. 53, pp. 433-435, Feb. 2011.

N. Ojaroudi, “Novel design of low-profile microstrip band-stop filter (BSF) with koch fractal RSLRs,” 22nd Telecommunications Forum, TELFOR 2014, Belgrade, Serbia, Nov. 25-27, 2014.

R. Habibi, Ch. Ghobadi, J. Nourinia, M. Ojaroudi, and N. Ojaroudi, “Very compact broad band-stop filter using periodic L-shaped stubs based on selfcomplementary structure for X-band application,” Electron. Lett., vol. 48, pp. 1483-1484, 2012.

Ansoft High Frequency Structure Simulator (HFSS), ver. 13, Ansoft Corporation, Pittsburgh, PA, 2010.

M Ojaroudi and N. Ojaroudi, “Microstrip lowpass filters by using novel defected ground structure slot with a pair of protruded T-shaped strips inside the slot,” Advanced Electromagnetics Symposium, AES 2012, Paris, France, Apr. 16-19, 2012.

N. Ojaroudi, M. Ojaroudi, and R. Habibi, “Design and implementation of very compact band-stop filter with petal-shaped stub for radar applications,” Microw. Opt. Technol. Lett., vol. 55, pp. 1130-1132, 2013.

Downloads

Published

2021-08-22

How to Cite

[1]
H. . Keivani, N. . Adlband, and Y. . Ojaroudi, “Compact Band-Stop X-Band Filter Using Triple Meander-Line-Ring Defected Ground Structures”, ACES Journal, vol. 30, no. 08, pp. 898–902, Aug. 2021.

Issue

Section

General Submission