A New Closed-Form Expression for Dispersion Characteristics of Fundamental Mode of SIW by Least Squares Method
Keywords:
Dispersion, least squares method (LSM), substrate integrated waveguide (SIW)Abstract
A new and accurate closed-form expression is introduced using least squares method (LSM) to calculate propagation constant of substrate integrated waveguide (SIW) at its fundamental mode of operation. The derived equation is a function of geometrical parameters of the structure and accurately estimates cutoff frequency of the dominant mode. The LSM is used to determine the effective width of the SIW structure. A review and comparisons with recently published simulation and measurement results are also provided, which verify the accuracy of the proposed method.
Downloads
References
F. Giuppi, A. Georgiadis, M. Bozzi, S. Via, A. Collado, and L. Perregrini, “Hybrid electromagnetic and non-linear modeling and design of SIW cavity-backed active antennas,” Journal of Applied Computational Electromagnetic Society, ACES, vol. 25, no. 8, 2010.
S. E. Hosseini-Nejad, N. Komjani, H. Oraizi, and M. T. Noghani, “Optimum design of SIW longitudinal slot array antennas with specified radiation patterns,” Journal of Applied Computational Electromagnetic Society, ACES, vol. 27, no. 4, 2012.
D. Jiang, Y. Xu, R. Xu, and W. Lin, “A novel band pass filters using complementary split ring resonator loaded half mode substrate integrated waveguide,” Journal of Applied Computational Electromagnetic Society, ACES, vol. 28, no. 2, 2013.
W. Shao and J. L. Li, “Design of a half-mode SIW high-pass filter,” Journal of Applied Computational Electromagnetic Society, ACES, vol. 26, no. 5, 2011.
R. Li., X. Tang, and F. Xiao, “A novel substrate integrated waveguide square cavity dual mode filter,” Journal of Electromagnetic Waves and Applications, vol. 23, no. 2, pp. 17-18, 2009.
C. Wylie, Advanced Engineering Mathematics, McGraw-Hill, New York, 1960.
W. Che, K. Deng, D. Wang, and Y. L. Chow, “Analytical equivalence between substrateintegrated waveguide and rectangular waveguide,” IET Microwave Antennas Propagation, vol. 2, no. 1, pp. 35-41, 2008.
D. Deslandes and K. Wu, “Accurate modeling, wave mechanism, and design considerations of substrate integrated waveguide,” IEEE Trans. Microwave Theory & Techniques, vol. 54, no. 6 pp. 2516-2526, 2006.
F. Xu and K. Wu, “Guided-wave and leakage characteristics of substrate integrated waveguide,” IEEE Trans. Microwave Theory & Techniques, vol. 53, no. 1, pp. 66-73, 2005.
Y. Cassivi, L. Perregrini, P. Arcioni, M. Bressan, K. Wu, and G. Conciauro, “Dispersion characteristics of substrate integrated rectangular waveguide,” IEEE Microwave and Wireless Components Letters, vol. 12, no. 9, pp. 333-335, 2002.
