Compact Planar Microstrip-Fed Printed Antenna with Double Band-Filtering for UWB Application

Authors

  • S. Ojaroudi Young Researchers and Elite Club Germi Branch, Islamic Azad University, Germi, Iran
  • Y. Ojaroudi Young Researchers and Elite Club Germi Branch, Islamic Azad University, Germi, Iran
  • N. Ojaroudi Young Researchers and Elite Club Ardabil Branch, Islamic Azad University, Ardabil, Iran

Keywords:

Anchor-shaped strip, inverted Uring structure, UWB applications

Abstract

In this paper, a new design of dual bandnotch printed monopole antenna for UWB applications is proposed. The antenna consists of a circular disc radiating patch with a protruded anchor-shaped strip, a feed line with an inverted Uring slot and a ground plane structure, which provides a wide usable fractional bandwidth of more than 125% (2.69-12.53 GHz) with dual bandstop performance around of 3.3-4.2 GHz and 5-6 GHz. In the proposed structure, by using a protruded anchor-shaped strip in the radiating patch, a single frequency band-stop performance can be achieved. Also, in order to create the second notched frequency, an inverted U-ring slot was cut at the feed line. Simulated and measured results obtained for this antenna show that the proposed monopole antenna offers two notched bands, covering all the 5.2/5.8 GHz WLAN, 3.5/5.5 GHz WiMAX and 4-GHz C-band range. The proposed antenna has a small dimension of 12×18×1.6 mm3 .

Downloads

Download data is not yet available.

References

FCC, “First report and order on ultra-wideband technology,” Tech. Rep., 2002.

H. Schantz, The Art and Science of Ultra-Wideband Antennas, Artech House, Norwood, MA, 2005.

N. Ojaroudi, “A new design of Koch fractal slot antenna for ultra-wideband applications,” 21st Telecommunications Forum, TELFOR 2013, Belgrade, Serbia, pp. 1051-1054, November 27-28, 2013.

N. Ojaroudi, “Small microstrip-fed slot antenna with frequency band-stop function,” 21st Telecommunications Forum, TELFOR 2013, Belgrade, Serbia, pp. 1047-1050, November 27-28, 2013.

N. Ojaroudi, “Design of small reconfigurable microstrip antenna for UWB-CR applications,” 19th International Symposium on Antenna and propagation, ISAP2014, Kaohsiung, Taiwan, December 2-5, 2012.

N. Ojaroudi and M. Ojaroudi, “Ultra-wideband slot antenna with band-stop notch,” IET Microw. Antennas Propag., vol. 10, pp. 831-835, 2013.

L. H. Ye and Q. X. Chu, “3.5/5.5 GHz dual band notch ultra-wideband slot antenna with compact size,” Electronics Letters, vol. 46, no. 5, pp. 325- 327, 2010.

M. Mighani, M. Akbari, and N. Felegari, “A CPW dual band notched UWB antenna,” Applied Computational Electromagnetics Society (ACES Journal), vol. 27, no. 4, pp. 352-359, April 2012.

Ansoft Corporation, Ansoft high frequency structure simulator (HFSS), ver. 13, Ansoft Corporation, Pittsburgh, PA, 2010.

N. Ojaroudi, “Circular microstrip antenna with dual band-stop performance for ultra-wideband systems,” Microw. Opt. Technol. Lett., vol. 56, pp. 2095-2098, 2014.

Downloads

Published

2021-08-22

How to Cite

[1]
S. . Ojaroudi, Y. . Ojaroudi, and N. . Ojaroudi, “Compact Planar Microstrip-Fed Printed Antenna with Double Band-Filtering for UWB Application”, ACES Journal, vol. 30, no. 04, pp. 457–462, Aug. 2021.

Issue

Section

General Submission