Earth Conductivity Estimation from Through-the-Earth Measurements of 94 Coal Mines Using Different Electromagnetic Models
Keywords:
Communication, conductivity, electromagnetic field, Extremely Low Frequency (ELF), Through-the-Earth (TTE), Very Low Frequency (VLF)Abstract
Through-the-Earth (TTE) communication systems require minimal infrastructure to operate. Hence, they are assumed to be more survivable and more conventional than other underground mine communications systems. This survivability is a major advantage for TTE systems. In 2006, Congress passed the Mine Improvement and New Emergency Response Act (MINER Act), which requires all underground coal mines to install wireless communications systems. The intent behind this mandate is for trapped miners to be able to communicate with surface personnel after a major accident-hence, the interest in TTE communications. To determine the likelihood of establishing a TTE communication link, it would be ideal to be able to predict the apparent conductivity of the overburden above underground mines. In this paper, all 94 mine TTE measurement data collected by Bureau of Mines in the 1970s and early 1980s, are analyzed for the first time to determine the apparent conductivity of the overburden based on three different models: a homogenous half-space model, a thin sheet model, and an attenuation factor or Q-factor model. A statistical formula is proposed to estimate the apparent earth conductivity for a specific mine based on the TTE modeling results given the mine depth and signal frequency.
Downloads
References
J. Durkin, “Study of through-the-earth transmission data as applied to earth conductivity,” U. S. Bureau of Mines, Pittsburgh Mining and Safety Researcher Center, 1981.
D. A. Hill and J. R. Wait, “Theoretical noise and propagation models for through-the-earth communication,” National Telecommunications & Information Admin., Institute for Telecommunication Sciences, 1982.
J. R. Wait, “Mutual electromagnetic coupling of loops over a homogeneous ground,” Geophysics, vol. 20, pp. 630-637, 1955.
J. R. Wait, “Electromagnetic waves in stratified media,” The MacMillan Co., 1962.
G. V. Keller and F. C. Frischknecht, “Electrical methods in geophysical prospecting,” Pergamon, 1966.
I. IEEE Standard 356, “Guide for radio methods of measuring earth conductivity,” Institute of Electrical and Electronics Engineers, p. 18, 1974.
R. L. Lagace, J. M. Dobbie, T. E. Doerfler, W. S. Hawes, and R. H. Spencer, “Detection of trapped miner electromagnetic signals above coal mines,” Arthur D. Little, Inc., Cambridge, Massachusetts, 1980.
J. R. Wait and K. P. Spies, “Evaluation of the surface electromagnetic fields for a buried magnetic dipole source,” DTIC Document, 1971.
J. R. Wait, “Subsurface electromagnetic fields of a circular loop of current located above ground,” IEEE Transaction on Antennas and Propagation, vol. 20, pp. 520-522, 1972.
J. Durkin, “Apparent earth conductivity over coal mines as estimated from through-the-earth electromagnetic transmission tests,” U.S. Bureau of Mines, Pittsburgh Mining and Safety Research Center, 1984.
R. G. Geyer, G. V. Keller, and T. Ohya, “Research on the transmission of electromagnetic signals between mine workings and the surface,” Colorado School of Mines, 1974.
