VFD Approach to the Computation TE and TM Modes in Elliptic Waveguide on TM Grid

Authors

  • A. Fanti Department of Electrical and Electronic Engineering University of Cagliari, 09123, Piazza d’Armi, Cagliari, Italy
  • G. Montisci Department of Electrical and Electronic Engineering University of Cagliari, 09123, Piazza d’Armi, Cagliari, Italy
  • G. Mazzarella Department of Electrical and Electronic Engineering University of Cagliari, 09123, Piazza d’Armi, Cagliari, Italy
  • G. A. Casula Department of Electrical and Electronic Engineering University of Cagliari, 09123, Piazza d’Armi, Cagliari, Italy

Keywords:

Elliptic waveguides, mode eigenvalues, vector finite difference

Abstract

We describe here a vector finite difference approach (VFD) to the evaluation of eigenvalues and modes of elliptical waveguides. The FD is applied using a 2D elliptical grid in the waveguide section. A suitable Taylor expansion of the vector mode function allows to take exactly into account the boundary condition. To prevent the raising of spurious modes, our FD approximation results in a constrained eigenvalue problem, that we solve using a decomposition method. This approach has been evaluated comparing our results to known data for the elliptic case.

Downloads

Download data is not yet available.

References

L. Prkna, M. Hubalek, and J. Ctyroky, “Vectorial eigenmode solver for bent waveguides based on mode matching,” IEEE Photonics Technology Letters, vol. 16, no. 9, pp. 2057-2059, Sep. 2004.

X. Zhu, D. Chen, and S. Wang, “A multistrip moment method technique and its application to the post problem in a circular waveguide,” IEEE Trans. Microw. Theory Tech., vol. 39, no. 10, pp. 1762-1766, Oct. 1991.

G. Mazzarella and G. Montisci, “Effect of the longitudinal component of the aperture electric field on the analysis of waveguide longitudinal slots,” IEEE Transactions on Antennas and Propagation, vol. 59, pp. 4334-4337, 2011.

L. Deias, G. Mazzarella, and A. Mereu, “A new analysis method for thick planar EBG,” IEEE Proc. Int. Conf Antennas and Propagation Society International Symposium, US, 5-8 July 2008.

S. Rengarajan, “Compound radiating slot in a broad wall of a rectangular waveguide,” IEEE Transactions on Antennas Propagation, vol. 37, pp. 1116-1124, 1989.

G. Mazzarella and G. Montisci, “Accurate characterization of the interaction between coupling slots and waveguide bends in waveguide slot arrays,” IEEE Trans. Microw. Theory Tech., vol. 48, pp. 1154-1157, September 2000.

P. Alinikula and K. Kunz, “Analysis of waveguide aperture coupling using the finite-difference timedomain method,” IEEE Microw. Guided Wave Lett., vol. 1, no. 8, pp. 189-191, Aug. 1991.

M. Matthys, M. Botha, and D. Davidson, “Investigation of an explicit, residual-based, a posteriori error indicator for the adaptive finite element analysis of waveguide structures,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 21, no. 1, pp. 63-71, March 2006.

R. Collin, Field Theory of Guided Waves, 2nd ed., IEEE Press, N.Y.

T. Weiland, “Three dimensional resonator mode computation by finite difference method,” IEEE Trans. Magn., vol. 21, pp. 2340-2343, 1985.

J. Hwang, “A compact 2-D FDFD method for modeling microstrip structures with nonuniform grids and perfectly matched layer,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 2, pp. 653-659, Feb. 2005.

D. White and J. Koning: “Computing solenoidal eigenmodes of the vector Helmholtz equation: a novel approach,” IEEE Trans. Magnetics, vol. 38, no. 5, pp. 3420-3425, Sep. 2002.

N. Thomas, P. Sewell, and T. Benson, “A new full-vectorial higher order finite-difference scheme for the modal analysis of rectangular dielectric waveguides,” Journal of Lightwave Technology, vol. 25, no. 9, pp. 2563-2570, Sept. 2007.

P. Lüsse, P. Stuwe, J. Schüle, and H.-G. Unger, “Analysis of vectorial mode fields in optical waveguides by a new finite difference method,” Journal of Lightwave Technology, vol. 12, no. 3, pp. 487-494, March 1994.

G. Hadley and R. Smith, “Full-vector waveguide modeling using an iterative finite-difference method with transparent boundary conditions,” Journal of Lightwave Technology, pp. 465-469, March 1995.

A. Fanti and G. Mazzarella, “A finite difference polar-Cartesian grid approach for mode computation in rounded-end waveguides,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 26, no. 9, pp. 768-775, Sep. 2011.

A. Fanti, G. Mazzarella, G. Montisci, and G. Casula, “Computation of the modes of elliptic waveguides with a curvilinear 2D frequencydomain finite-difference approach,” Progress In Electromagnetics Research M, vol. 26, pp.69-84, 2012.

L. Chu, “Electromagnetic waves in elliptic hollow pipes of metal,” Journal. Appl. Phys., vol. 9, pp. 583-591, Sep. 1938.

A. Fanti and G. Mazzarella, “Finite difference single grid evaluation of TE and TM modes in metallic waveguides,” IEEE Proc. I nt. Conf. Loughborough Antennas and Propagation Conference, UK, pp. 517-520, 08-09 Nov. 2010.

W. Gander, G. Golub, and U. Matt, “A constrained eigenvalue problem,” Linear Algebra and its App lications,” vol. 114-115, pp. 815-839, March-April 1989.

P. Halmos, Linear Algebra Problem Book, The Mathematical Association of America.

J. Bladel, Electromagnetic Fields, Wiley Interscience, New York.

G. Golub and C. Loan, The Matrix Computations, The Johns Hopkins University Press, 3rd ed., pp. 621.

Sh. Zhang and Y. Chen, “Eigenmodes sequence for an elliptical waveguides with arbitrary ellipticity,” IEEE Trans. Mi crowave Theory and Techniques, vol. 43, no. 1, pp. 227-230, Jan. 1995.

G. Tsogkas, J. Roumeliotis, and S. Savaidis, “Cutoff wavelengths of elliptical metallic waveguides,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 10, pp. 2406-2415, Oct. 2009.

Downloads

Published

2021-09-19

How to Cite

[1]
A. . Fanti, G. . Montisci, G. . Mazzarella, and G. A. . Casula, “VFD Approach to the Computation TE and TM Modes in Elliptic Waveguide on TM Grid”, ACES Journal, vol. 28, no. 12, pp. 1205–1212, Sep. 2021.

Issue

Section

General Submission