Characteristic Parameters Determination of Different Striplines Configurations using HBEM
Keywords:
Characteristic impedance, equivalent electrodes method, finite element method, hybrid boundary element method, striplineAbstract
Different configurations of striplines are analyzed using the hybrid boundary element (HBEM) method, developed at the Faculty of Electronic Engineering of Niš. The quasi TEM analysis is applied. The effective dielectric permittivity as well as the characteristic impedance of several 2D striplines are determined. In order to validate the obtained HBEM values of the characteristic impedance, in terms of accuracy, they have been compared with the corresponding ones obtained by the finite element method. Fast convergence of the results, short computation time, and possibility to solve complex multilayered configurations of striplines, make hybrid boundary element method very efficient in the calculation of 2D striplines parameters. All results are presented in tables and graphically.
Downloads
References
B. C. Wadell, Transmission Line Design Handbook, Artech House, Inc., pp. 125-137, 1991.
H. A. Wheeler, “Transmission line properties of a strip line between parallel planes,” IEEE Trans. Microwave Theory Tech., vol. 26, no. 11, pp. 866- 876, Nov. 1978.
S. Rawal and D. Jackson, “An exact TEM calculation of loss in a stripline of arbitrary dimension,” IEEE Trans. Microwave Theory Tech., vol. 39, no. 4, pp. 694-699, April 1991.
H. H. Chen, “Finite-element method coupled with method of lines for the analysis of planar or quasiplanar transmission lines,” IEEE Trans. Microwave Theory Tech., vol. 51, no. 3, pp. 848- 855, March 2003.
K.-Y. Su and J.-T. Kuo, “An efficient analysis of shielded single and multiple coupled microstrip lines with nonuniform fast Fourier transform (NUFFT) technique,” IEEE Trans. Microwave Theory Tech., vol. 52, no. 1, pp. 90-96, Jan. 2004.
M. Tong, “Full-wave analysis of coupled lossy transmission lines using multiwavelet-based method of moments,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 7, pp. 2362-2370, July 2005.
M. Lucido, “A new high-efficient spectral-domain analysis of single and multiple coupled microstrip lines in planarly layered media,” IEEE Trans. Microwave Theory Tech., vol. 60, no. 7, pp. 2025- 2034, July 2012.
C. Wei, R. Harrington, J. Mautz, and T. Sarkar, “Multiconductor transmission lines in multilayered dielectric media,” IEEE Trans. Microwave Theory Tech., vol. 32, no. 4, pp. 439-450, April 1984.
J. Crane and M. Havrilla, “Effect of centerconductor misalignment on stripline characteristic impedance,” 25th Annual Review of Progress in Applied Computational Electromagnetics – ACES, Monterey, California, USA, pp. 587-592, 2009.
F. Seydou, R. Duraiswami, N. A. Gumerov, and T. Seppanen, “TM electromagnetic scattering from 2D multilayered dielectric bodies – numerical solution,” ACES journal, vol. 19, no. 2, pp. 100-107, 2004.
N. Raičević and S. Ilić, “One hybrid method application on anisotropic strip lines determination,” 23rd Annual Review of Progress in Applied Computational Electromagnetics – ACES, Verona, Italy, pp. 8-13, 2007.
N. Raicevic, S. Aleksic, and S. Ilic, “A hybrid boundary element method for multilayer electrostatic and magnetostatic problems,” J. of Electromagnetics, vol. 30, no. 6, pp. 507-524, 2010.
D. Veličković, “Equivalent electrodes method,” Scientific Review, no. 21-22, pp. 207-248, 1996.
C. Brebbi, J. C. Telles, and L. Wrobel, Boundary Element Techniques. Theory and Applications in Engineering, Berlin: Springer, 1984.
J. Singh, A. Glière, and J. Achard, “A multipole expansion-based boundary element method for axisymmetric potential problem,” J. of Engineering Analysis with Boundary Elements, vol. 33, no. 5, pp. 654-660, 2009.
R. Harrington, Field Computation by Moment Methods, New York: Macmillan, 1968.
D. Veličković, “Application of equivalent electrodes method in multilayer media,” Proc. 5th International Conf. on Applied Electromagnetics PES 2001, Niš, Serbia & Montenegro, pp. 873- 878, 2001.
D. Veličković and S. Ilić, “Shielded slot line of two dielectric layers-theoretical analysis,” Proc. 6th International Conf. on Applied Electromagnetics PES 2003, Niš, Serbia and Montenegro, pp. 297-300, 2003.
D. Veličković and S. Ilić, “Shielded slot line of two dielectric layers-numerical results,” Proc. 6th International Conf. on Applied Electromagnetics PES 2003, Niš, Serbia and Montenegro, pp. 301- 304, 2003.
S. Ilić, N. Raičević, and S. Aleksić, “Application of new hybrid boundary element method on grounding systems,” Proc. of 14th International IGTE'10 Symposium, Graz, Austria, pp. 160-165, 2010.
N. Raičević, S. Ilić, and S. Aleksić, “Application of new hybrid boundary element method on the cable terminations,” Proc. of 14th International IGTE'10 Symposium, Graz, Austria, pp. 56-61, 2010.
B. Petković, S. Ilić, S. Aleksić, N. Raičević, and D. Antić, “A novel approach to the positive DC nonlinear corona design,” J. of Electromagnetics, vol. 31, no. 7, pp. 505-524, 2011.
N. Raicevic and S. Ilic, “One hybrid method application on complex media strip lines determination,” Proc. 3rd International Congress on Advanced Electromagnetic Materials in Microwaves and Optics, METAMATERIALS 2009, London, United Kingdom, pp. 698-700, 2009.
D. Meeker, FEMM 4.2, Available: http://www.femm.info/wiki/Download
S. Ilić, S. R. Aleksić, and N. B. Raičević, “TEM analysis of vertical broadside symmetrically coupled strip lines with anisotropic substrate,” International Journal of Applied Electromagnetics and Mechanics, IOS Press, vol. 37, no. 2-3, pp. 207-214, 2011.
