A Microstrip Printed Band-Notched UWB Antenna Using Modified CSRR Structure

Authors

  • Di Jiang School of Electronic Engineering University of Electronic Science and Technology of China, Chengdu, China
  • Yuehang Xu School of Electronic Engineering University of Electronic Science and Technology of China, Chengdu, China
  • Ruimin Xu School of Electronic Engineering University of Electronic Science and Technology of China, Chengdu, China

Keywords:

Multiband, notch bands, printed slot antenna, ultra-wideband (UWB)

Abstract

A compact triple band-notch ultrawideband (UWB) antenna with microstrip-feed is presented. The desired band-notch antenna is achieved by etching a narrowband triple complementary split-ring resonator into the radiating element of an existing UWB antenna. By attenuation of the measured return, the new antenna reduces interference from UWB in the Cband (3.7 GHz - 4.2 GHz) satellite communication systems and wireless local area network (5.15 GHz - 5.35 GHz, 5.725 GHz - 5.825 GHz bands). The built prototypes have a compact size of 25 × 27.9 mm2 including the ground plane. This miniature size also delivers advantageous radiation patterns with good mono-polar characteristics across the UWB band with the gain attenuated within the desired notch bands. The antenna demonstrates omnidirectional and stable radiation patterns across all the relevant bands. Moreover, a prototype of the proposed antenna is fabricated, and the measured results are shown to be in good agreement with the simulated results.

Downloads

Download data is not yet available.

References

Federal Communications Commission, Washington, DC, “Revision of part 15 of the commission’s rules regarding ultra-wideband transmission systems, First note and order,” ETDocket 98-153, 2002.

N. Farrokh-Heshmat, J. Nourinia, and C. Ghobadi, “Band-notched ultra-wideband printed open-slot antenna using variable on-ground slits,” Electron. Lett., vol. 45, no. 21, pp. 1060-1061, Oct. 2009.

G. Zhang, J. S. Hong, B. Z. Wang, and G. Song, “Switched band-notched UWB/ WLAN monopole antenna,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 3, pp. 256-260, March 2012.

C. Yu, W. Hong, L. Chiu, G. Zhai, C. Yu, W. Qin, and Z. Kuai, “Ultra-wideband printed log-periodic dipole antenna with multiple notched bands,” IEEE Trans. Antennas Propag., vol. 59, no. 3, pp. 725-732, March 2011.

M. T. Partovi, N. Ojaroudi, and M. Ojaroudi, “Small slot antenna with enhanced bandwidth and band-notched performance for UWB applications,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 9, pp. 772-778, Sep. 2012.

F. Wei, L. Xu, X.-W. Shi, and B. Liu, “Compact UWB bandpass filter with two notch bands based on folded SIR,” Electron. Lett., vol. 46, no. 25, pp. 1679-1680, Dec. 2010.

A. M. Montaser, K. R. Mahmoud, and H. A. Elmikati, “Integration of an optimized E-shaped patch antenna into laptop structure for bluetooth and notched-UWB standards using optimization techniques,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 10, pp. 786-794, Oct. 2012.

A. A. Eldek, “Numerical analysis of a small ultra wideband microstrip fed tap monopole antenna,” Prog. Electromagn. Res., vol. 65, pp. 59-69, 2006.

B. H. Siahkal-Mahalle, M. Ojaroudi, and N. Ojaroudi, “Enhanced bandwidth small square monopole antenna with band-notched functions for UWB wireless communications,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 9, pp. 759-765, Sep. 2012.

Y. D. Dong, W. Hong, Z. Q. Kuai, C. Yu, Y. Zhang, J. Y. Zhou, and J. Chen, “Development of ultra wideband antenna with multiple bandnotched characteristics using half mode substrate integrated waveguide cavity technology,” IEEE Trans. Antennas Propag., vol. 57, no. 12, pp. 2894-2902, Dec. 2009.

M. Ojaroudi, N. Ojaroudi, and Y. Ebazadeh, “Dual band-notch small square monopole antenna with enhanced bandwidth characteristics for UWB applications,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 5, pp. 420-426, May 2012.

A. Valizade, Ch. Ghobadi, J. Nourinia, N. Ojaroudi, and M. Ojaroudi, “Band-notch slot antenna with enhanced bandwidth by using Ωshaped strips protruded inside rectangular slots for UWB applications,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 10, pp. 816- 822, Oct. 2012.

D. Jiang, Y. Xu, R. Xu, and W. Lin, “Compact dual-band-notched UWB planar monopole antenna with modified CSRR,” Electro. Lett., vol. 48, no. 20, pp. 1250-1252, Sep. 2012.

K. S. Ryu and A. A. Kishk, “UWB antenna with single or dual band- notches for lower WLAN band and upper WLAN band,” IEEE Trans. Antennas Propag., vol. 57, no. 12, pp. 3942-3950, Dec. 2009.

X. N. Low, Z. N. Chen, and T. S. P. See, “A UWB dipole antenna with enhanced impedance and gain performance,” IEEE Trans. Antennas Propag., vol. 54, no. 10, pp. 2959-2966, Oct. 2009.

X. L. Ma, W. Shao, and G. Q. He, “A novel dual narrow band-notched CPW-fed UWB slot antenna with parasitic strips,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 7, pp. 581-586, July 2012.

A. Nouri and G. R. Dadashzadeh, “A compact UWB band-notched printed monopole antenna with defected ground structure,” IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 1178-1181, 2011.

C.-M. Wu, Y.-L. Chen, and W.-C. Liu, “A compact ultra wideband slotted patch antenna for wireless USB dongle application,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 596- 599, 2012.

Z. L. Zhou, L. Li, and J. S. Hong, “A novel compact monopole antenna with triple high quality rejected bands for UWB applications,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 8, pp. 654-659, August 2012.

M. Mighani, M. Akbari, and N. Felegari, “A CPW dual band notched UWB antenna,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 4, pp. 352-359, April 2012.

W. Jiang and W. Che, “A novel UWB antenna with dual notched bands for WiMAX and WLAN applications,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 293-5296, 2012.

C.-T. Chuang, T.-J. Lin, and S.-J. Chung, “A band-notched UWB monopole antenna with high notch-band-edge selectivity,” IEEE Trans. on Antennas and Propagation, vol. 60, no. 10, pp. 4492-4499, Oct. 2012.

S. W. Wong, T. G. Huang, C. X. Mao, Z. N. Chen, and Q. X. Chu, “Planar filtering ultra-wideband (UWB) antenna with shorting pins,” IEEE Trans. on Antennas and Propagation, vol. 61, no. 2, pp. 948-953, Feb. 2013.

Y. Sung, “Triple band-notched UWB planar monopole antenna using a modified H-shaped resonator,” IEEE Trans. on Antennas and Propagation, vol. 61, no. 2, pp. 953-957, Feb. 2013.

F. Wei, Z. D. Wang, F. Yang, and X. W. Shi, “Compact UWB BPF with triple-notched bands based on stub loaded resonator,” Electro. Lett., vol. 49, no. 2, Jan. 2013.

Downloads

Published

2021-10-06

How to Cite

[1]
D. . Jiang, Y. . Xu, and R. . Xu, “A Microstrip Printed Band-Notched UWB Antenna Using Modified CSRR Structure”, ACES Journal, vol. 28, no. 06, pp. 521–527, Oct. 2021.

Issue

Section

General Submission