Calculation and Analysis of Shielding Effectiveness of the Rectangular Enclosure with Apertures

Authors

  • Chuan-Chuan Wang Department of Electrical Engineering Shi Jia Zhuang Mechanical Engineering College, Shi Jia Zhuang, 050003, P.R.China
  • Chang-Qing Zhu Department of Electrical Engineering Shi Jia Zhuang Mechanical Engineering College, Shi Jia Zhuang, 050003, P.R.China
  • Xing Zhou Electrostatic and Electromagnetic Research Institute Shi Jia Zhuang Mechanical Engineering College, Shi Jia Zhuang, 050003, P.R.China
  • Zhi-Feng Gu Department of Electrical Engineering Shi Jia Zhuang Mechanical Engineering College, Shi Jia Zhuang, 050003, P.R.China

Keywords:

Analytical method, numerical method, rectangular enclosure, shielding effectiveness, transmission line theory

Abstract

Based on transmission line theory, an approach which combines the analytical model developed by Robinson et al. and the model which analyses the shielding effectiveness (SE) of enclosure with an off-centre aperture or aperture array is presented. The model is more general than other methods and includes the incident wave with varied polarization angles and incident angles. It is quicker to calculate the SE with this model, which on the other hand enables to investigate the effect of important design parameters on SE. This model is validated by comparing the SE predictions with those from literatures. Different aspects’ effect on the SE are investigated such as aperture dimension, enclosure dimension, position of observation point, number of apertures, polarization angles, and incident angles, etc.

Downloads

Download data is not yet available.

References

H. A. Mendez, “On the theory of low-frequency excitation of cavity resonances,” IEEE Trans. Microwave Theory Tech., vol. 18, pp. 444-448, 1970.

H. A. Mendez, “Shielding theory of enclosures with apertures,” IEEE Trans. Electromagn. Compat., vol. 20, pp. 296-305, May 1978.

H. A. Bethe, “Theory of diffraction by small holes,” Phys. Rev. II, vol. 66, pp. 163-182, 1944.

W. Wallyn, D. De Zutter, and E. Laermans, “Fast shielding effectiveness prediction for realistic rectangular enclosures,” IEEE Trans. Electromagn. Compat., vol. 45, no. 4, pp. 639- 643, 2003.

B. Audone and M. Balma, “Shielding effectiveness of apertures in rectangular cavities,” IEEE Trans. Electromagn. Compat., vol. 31, no. 1, pp. 102-106, 1989.

Jr. W. P. Carpes, G. S. Ferreira, and A. Raizer, et al, “TLM and FEM methods applied in the analysis of electromagnetic coupling,” IEEE Trans. Magn., vol. 36, no. 4, pp. 982-985, 2000.

V. Rajamani, C. F. Bunting, and M. D. Deshpande, et al, “Validation of modal/ MoM in shielding effectiveness studies of rectangular enclosures with apertures,” IEEE Trans. Electromagn. Compat., vol. 46, no. 2, pp. 348-353, 2006.

J. Chen and A. X. Zhang, “A Subgridding scheme based on the FDTD method and HIE-FDTD method,” Appl. Comp. Electro. Society (ACES) Journal, vol. 26, no. 1, pp. 1-7, 2011.

W. Abdelli, X. Mininger, and L. Pichon, et al, “Impact of composite materials on the shielding effectiveness of Enclosures,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 4, pp. 369- 375, 2012.

P. Dehkhoda, A. Tavakoli, and M. Azadifar, “Shielding effectiveness of an enclosure with finite wall thickness and perforated opposing walls at oblique incidence and arbitrary polarization by GMMoM,” IEEE Trans. Electromagn. Compat., vol. 54, no. 4, pp. 792- 805, 2012.

N. Fichtner and P. Russer, “A hybrid TLMintegral equation method using time–domain plane-waves for shielding effectiveness computations,” 26th Annual Review of Progress in Appl. Comp. Electro. Society (ACES), Tampere, Finland, pp. 404-409, April, 2010.

M. P. Robinson, T. M. Benson, and C. Christopoulos, et al, “Analytical formulation for the shielding effectiveness of enclosures with apertures,” IEEE Trans. Electromagn. Compat., vol. 40, no. 3, pp. 240-248, 1998.

K. C. Gupta, R. Garg, and I. J. Bahl, Microstrip Lines and Slot Lines, Artech House, Norwood, MA, 1979, Ch.7.

D. Shi, Y. Shen, and Y. Gao, “3 High-order mode transmission line model of enclosure with offcenter aperture,” IEEE Int. Symp. on Electromagn. Compat., pp. 361-364, October, 2007.

T. Y. Otoshi, “A study of microwave leakage through perforated flat plates,” IEEE Trans. Microw. Theory Tech., vol. 20, no. 3, pp. 235-236, 1972.

W. Culshaw, “Reflectors for a microwave Fabry– Perot interferometer,” IEEE Trans. Microw. Theory Tech., vol. 7, no. 2, pp. 221-228, 1959.

X. H. Chen, “Research on composite shielding effectiveness computing method and equipments electromagnetic protection envelope,” Doctoral Thesis of Shi Jia Zhuang, Mechanical Engineering College, China, 2011.

H. Song, D. F. Zhou, and D. T. Hou, et al, “Hybrid algorithm for slot coupling of double layer shielding cavity,” High Power Laser and Particle Beams, vol. 20, no. 11, pp. 1892-1898, 2008.

L. Wang and Y.Gao, “Analysis of shielding effectiveness for rectangular cavity with apertures and resonance suppression,” Chinese Journal of Radio Science, vol. 23, no. 3, pp. 560-564, 2008.

G. Wu, X. Zhang, and B. Liu, “A Hybrid method for predicting the shielding effectiveness of rectangular metallic enclosures with thickness apertures,” J. of Electromagn. Waves and Appl., vol. 24, pp. 1157-1169, 2010.

X. F. Zhang, Y. Li, and G. Y. Ni, et al, “Hybrid model to evaluating shielding effectiveness of cavity with apertures,” Chinese Journal of Radio Science, vol. 26, no. 1, pp. 25-29, 2011.

Downloads

Published

2021-10-06

How to Cite

[1]
C.-C. . Wang, C.-Q. . Zhu, X. . Zhou, and Z.-F. . Gu, “Calculation and Analysis of Shielding Effectiveness of the Rectangular Enclosure with Apertures”, ACES Journal, vol. 28, no. 06, pp. 535–545, Oct. 2021.

Issue

Section

General Submission