Small Microstrip Low-Pass Filter by using Novel Defected Ground Structure for UWB Applications

Authors

  • Ahmad Faraghi Microelectronic Research Laboratory Urmia University, Urmia, Iran
  • Mohammad-Naghi Azarmanesh Microelectronic Research Laboratory Urmia University, Urmia, Iran
  • Mohammad Ojaroudi Young Researchers Club Ardabil Branch, Islamic Azad University, Ardabil, Iran

Keywords:

Defected ground structure, microstrip low-pass filter, protruded T-shaped strip, T-shaped open stub

Abstract

In this paper, a novel low-pass filter using defected ground structure (DGS) slot with a protruded T-shaped strip inside the slot is presented. The resonant frequency of the slot can be easily controlled by changing the protruded Tshaped strips dimensions, without changing the area taken by the structure. Using this DGS slot, a quasi-elliptic low-pass filter was designed, fabricated, and tested. The experimental results show good agreement with simulation results and demonstrate that excellent stop-band performance could be obtained through the proposed low-pass filter. The filter has a cut-off frequency of about 3.4 GHz.

Downloads

Download data is not yet available.

References

C. -S. Lim, C. -S. Kim, D. Ahn, Y. -C. Jeong, and S. Nam, “Design of the low-pass filters using defected ground structure,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 8, pp. 2539-2545, Aug. 2005.

S. U. Rehman, A. A. Sheta, and M. A. S. Alkanhal, “Compact bandpass filters with bandwidth control using defected ground structure (DGS),” Appl. Comp. Electro. Society (ACES) Journal, vol. 26, no. 7, pp. 624-630, July 2011.

G. E. Al-Omair, S. F. Mahmoud and A. S. AlZayed, “Lowpass and bandpass filter designs based on DGS with complementary split ring resonators,” Appl. Comp. Electro. Society (ACES) Journal, vol. 26, no. 11, pp. 907-914, Nov. 2011.

M. Challal, A. Boutejdar, M. Dehmas, A. Azrar, and A. Omar, “Compact microstrip low-pass filter design with ultra-wide reject band using a novel quarter-circle DGS shape,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 10, pp. 808- 815, Oct. 2012.

A. Boutejdar, M. Challal, and A. Azrar, “A novel band-stop filter using octagonal-shaped patterned ground structures along with interdigital and compensated capacitors,” Appl. Comp. Electro. Society (ACES) Journal, vol. 26, no. 4, pp. 312- 318, April 2011.

W. Shao and J. L. Li, “Accurate modeling of a patterned ground and its application to microwave filters,” Appl. Comp. Electro. Society (ACES) Journal, vol. 27, no. 7, pp. 596-602, July 2012.

R. Habibi, Ch. Ghobadi, J. Nourinia, M. Ojaroudi, and N. Ojaroudi, “Very compact broad band-stop filter using periodic L-shaped stubs based on selfcomplementary structure for X-band application,” Electro. Letters IET, vol. 48, no. 23, 8th Nov. 2012.

J. S. Yun, G. Y. Kim, J. S. Park, D. Ahn, K. W. Kang, and J. B. Lim, “A design of the novel coupled line bandpass filter using defected ground structure,” IEEE MTT-S Int. Dig., Boston, MA, pp. 327-330, June 2000.

J. S. Park, J. S. Yun, and D. Ahn, “A design of the novel coupled line bandpass filter using defected ground structure with wide stopband performance,” IEEE Trans. Microw. Theory Tech., vol. 50, no. 9, pp. 2037-2043, Sep. 2002.

J. -S. Lim, C. –S. Kim, Y. –T. Lee, D. Ahn, and S. Nam, “Design of lowpass filters using defected ground structure and compensated microstrip line,” Electro. Letters IET, vol. 38, no. 22, Oct. 2002.

Ansoft High Frequency Structure Simulation (HFSS), Ver. 13, Ansoft Corporation, 2010.

A. B. Abdel-Rahman, A. K. Verma, A. Boutejdar, and A. S. Omar, “Control of bandstop response of Hi-Lo microstrip low-pass filter using slot in ground plane,” IEEE Trans. Microw. Theory Tech., vol. 52, no. 3, pp. 1008-1013, Mar. 2004.

H. -W. Liu, Z. -F. Li, W. Sun, and J. -F. Mao, “An improved 1-D periodic defected ground structure for microstrip line,” IEEE Microw. Wireless Compon. Lett., vol. 14, no. 4, pp. 180-182, Apr. 2004.

C. -S. Kim, J. –S. Lim, J. -H. Kim, and D. Ahn, “A design of a miniaturized 2-pole bandpass filter by using slot and hair-pin line,” IEEE MTT-S Int. Dig., Fort Worth, TX, pp. 1983-1986, June 2006.

A. R. Ali, A. Abdel-Rahman, A. Amari, and A. S. Omar, “Direct and cross-coupled resonator filters using defected ground structure (DGS) resonators,” Proc. 35th Eur. Microw. Conf., Paris, France, pp. 1275-1278, Oct. 2005.

A. Abdel-Rahman, A. K. Verma, A. Boutejdar, and A. S. Omar, “Compact stub type microstrip bandpass filter using defected ground plane,” IEEE Microw. Wireless Compon. Lett., vol. 14, no. 4, pp. 136-138, Apr. 2004.

S. -W. Ting, K. -W. Tam, and R. P. Martins, “Compact microstrip quasi-elliptic bandpass filter using open-loop dumbbell shaped defected ground structure,” IEEE MTT-S Int. Dig., San Francisco, CA, pp. 527-530, June 2006.

Downloads

Published

2021-10-06

How to Cite

[1]
A. . Faraghi, M.-N. . Azarmanesh, and M. . Ojaroudi, “Small Microstrip Low-Pass Filter by using Novel Defected Ground Structure for UWB Applications”, ACES Journal, vol. 28, no. 04, pp. 341–347, Oct. 2021.

Issue

Section

General Submission