Characteristics Analysis of Double-Sided Permanent Magnet Linear Synchronous Motor with Three-Phase Toroidal Windings

Authors

  • Xiaobao Chai Department of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China
  • Jikai Si Department of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China
  • Yihua Hu Department of Electronic Engineering, University of York, York, YO 10 5DD, U.K.
  • Yingsheng Li Zhengzhou Runhua Intelligent Equipment Co., Ltd., Zhengzhou, 450004, China
  • Dongshu Wang Department of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China

Keywords:

Character analysis, double-sided permanent magnet linear synchronous motor, operation principle, three-phase 120° phase belt toroidal windings, thrust density

Abstract

This paper proposes three-phase 120° phase belt toroidal windings (120°-TW) and are applied in a double-sided permanent magnet linear synchronous motor (DSPMLSM), in which the incoming ends of all coils are on the same side and have the same incoming direction. First, the structure of the proposed motor is introduced and its operation principle is analyzed by describing the variation in the armature magnet field versus time. Second, based on the similar volume, magnetic load and electrical load, the initial parameters of the DSPMLSM with different winding arrangements are presented. Then, the finite-element models (FEMs) of the DSPMLSM with 120°-TW (120°-TWDSPMLSM) and traditional toroidal windings (TTW) are established to analyze the distribution of magnetic field, back electromotive force (back-EMF), detent force, thrust, efficiency and so on. Besides, the primary optimization of the detent force is designed. Finally, the results show that the thrust density and efficiency of the 120°-TWDSPMLSM is higher than that of DSPMLSM with TTW (TTWDSPMLSM).

Downloads

Download data is not yet available.

Author Biographies

Xiaobao Chai , Department of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China

Xiaobao Chai was born in China in 1997. He received B.S. degrees in Electrical Engineering and Automation, Electrical Engineering from the Department of Electrical Engineering and Automation, Shenyang University of Technology, China, in 2019. He is currently working toward the M.S. degree in Electrical Engineering from the Department of Electrical Engineering and Automation, Zhengzhou University, China. His current research interests include design, analysis and control of doublesided permanent magnet linear synchronous motor

Jikai Si, Department of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China

Jikai Si received the B.S. degree in Electrical Engineering and Automation from the Jiaozuo Institute of Technology, Jiaozuo, China, in 1998; the M.S. degree in Electrical Engineering from Henan Polytechnic University, Jiaozuo, China, in 2005; and the Ph.D. degree in 2008 from the School of Information and Electrical Engineering, China University of Mining and Technology, Xuzhou, China, in 2008. He is currently a Distinguished Professor at Zhengzhou University. His main research interests include the theory, application, and control of special motor. He has authored and co-authored over 160 technical papers in these areas. Si is a Member of the Green Motor System Professional Committee, China.

Yihua Hu, Department of Electronic Engineering, University of York, York, YO 10 5DD, U.K.

Yihua Hu received the B.S. degree in Electrical Motor Drives, in 2003, and the Ph.D. degree in Power Electronics and Drives, in 2011, both from China University of Mining and Technology, Jiangsu, China. Between 2011 and 2013, he was a Postdoctoral Fellow with the College of Electrical Engineering, Zhejiang University, Zhejiang, China. He is currently a Distinguished Professor at University of York. His research interests include PV generation system, power electronics converters and control, and electrical motor drives.

Yingsheng Li, Zhengzhou Runhua Intelligent Equipment Co., Ltd., Zhengzhou, 450004, China

Yingsheng Li currently works in Zhengzhou Runhua Intelligent Eq-uipment Co., Ltd, and is the legal representative of Zhengzhou Runhua Intelligent Equipment Co., Ltd. His research interests include the application, control of motor, and power electronics converters and control, and electrical motor drives.

Dongshu Wang, Department of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China

Dongshu Wang received the bachelor’s degree in Mechanical Manufacture Technique and Equipment, the master’s degree in Mechanical Manufacture and Automation, and the Ph.D. degree in Control Theory and Control Engineering from Northeastern University, Shenyang, China, in 1996, 2002, and 2006, respectively. He is currently an Associate Professor with the School of Electrical Engineering, Zhengzhou University, Zhengzhou, China. His research domains are autonomous mental development and artificial intelligence.

References

C. E. Kim, S. H. Lee, D. H. Lee, and H. J. Kim, “The analysis of permanent magnet double-sided linear synchronous motor with perpendicular arrangement,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2267-2270, May 2013.

Y. S. Kwon and W. J. Kim, “Electromagnetic analysis and steady-state performance of doublesided flat linear motor using soft magnetic composite,” IEEE Transactions on Industrial Electronics, vol. 64, no. 3, pp. 2178-2187, Mar. 2017.

Z. J. Zhang, M. Z. Luo, J. A. Duan, and B. Q. Kou, “Performance analysis of double-sided permanent magnet linear synchronous motor with quasisinusoidal ring windings,” IEEE Transactions on Energy Conversion, vol. 35, no. 3, pp. 1465-1474, Sept. 2020.

B. Rezaeealam and F. Rezaeealam, “Optimization of permanent magnet synchronous motors using conformal mappings,” Applied Computational Electromagnetic Society (ACES) Journal, vol. 32, no. 10, pp. 915-923, Oct. 2019.

G. D. Liu, Y. Z. Wang, X. P. Xu, W. Y. Ming, and X. Zhang, “The optimal design of real time control precision of planar motor,” Applied Computational Electromagnetic Society (ACES) Journal, vol. 32, no. 10, pp. 948-954, Oct. 2019.

F. F. Bian, W. X. Zhao, J. H. Ji, L. Xu, H. Chen, and M. H. Gao, “Mechanism investigation of ring type winding in linear permanent magnet vernier machine for improving force density,” IEEE Transactions on Vehicular Technology, vol. 69, no. 3, pp. 2588-2597, Mar. 2020.

A. Boduroglu, Y. Demir, B. Cumhur, and M. Aydin, “A novel track structure of double-sided linear PM synchronous motor for low cost and high force density applications,” IEEE Transactions on Magnetics, DOI 10.1109/TMAG. 3017448, 2021.

Y. Zhou, C. J. Shi, R. H. Qu, D. W. Li, and Y. T. Gao, “Overview of flux-modulation linear permanent magnet machines,” Proceeding of the CSEE, vol. 41, no. 4, pp. 1469-1484, Feb. 2021.

C. J. Shi, R. H. Qu, Y. T. Gao, D. W. Li, L. B. Jing, and Y. Zhou, “Design and analysis of an interior permanent magnet linear vernier machine,” IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1- 5, June 2018.

L. Y. Li, M. N. Ma, B. Q. Kou, and Q. Q. Chen, “Analysis and design of moving-magnet-type linear synchronous motor for electromagnetic launch system,” IEEE Transactions on Plasma Science, vol. 39, no. 1, pp. 121-126, Jan. 2011.

B. Q. Kou, H. X. Wu, L. Y. Li, L. L. Zhang, Z. Zhao, and H. C. Cao, “The thrust characteristics investigation of double-side plate permanent magnet linear synchronous motor for EML,” IEEE Transactions on Magnetics, vol. 45, no. 1, pp. 501- 505, Jan. 2009.

W. M. Tong, S. N. Wu, and R. Y. Tang, “Research on the airflow and thermal performance in a large forced air-cooled permanent magnet synchronous machine,” IEEE Access, DOI 10.119/ACCESS. 2951919, 2019.

Y. Q. Wang, X. Y. Huang, and Y. T. Fang, “Thermal analysis and cooling structure selection of electric machine applied in EV,” Micromotors, vol. 53, no. 1, pp. 1-5, Jan. 2020.

W. B. Kong, J. Huang, R. H. Qu, M. Kang, and J. Q. Yang, “Nonsinusoidal power supply analysis for concentrated-full-pitch-winding multiphase induction motor,” IEEE Transactions on Industrial Electronics, vol. 63, no. 1, pp. 574-582, Jan. 2016.

X. Z. Huang, T. P. Ji, L. Y. Li, B. Zhou, Z. R. Zhang, D. Gerada, and C. Gerada, “Detent force, thrust, and normal force of the short-primary double-sided permanent magnet linear synchronous motor with slot-shift structure,” IEEE Transactions on Energy Conversion, vol. 34, no. 3, pp. 1411- 1421, Sept. 2019.

S. W. Seo, G. H. Jang, J. M. Kim, and J. Y. Choi, “Characteristic analysis and experimental verification for a double-sided permanent magnet linear synchronous generator according to magnetization array,” IEEE Transactions on Applied Superconductivity, DOI 10.1109/TASC. 2790941, 2018.

S. G. Lee, S. A. Kim, S. Saha, Y. W. Zhu, and Y. H. Cho, “Optimal structure design for minimizing detent force of PMLSM for a ropeless elevator,” IEEE Transactions on Magnetics, DOI 10.1109/ TMAG. 2277544, 2013.

H. Zhang, B. Q. Kou, Z. Q. Zhu, R. H. Qu, J. Luo, and Y. Shao, “Thrust ripple analysis on toroidalwinding linear permanent magnet vernier machine,” IEEE Transactions on Industrial Electronics, vol. 65, no. 12, pp. 9853-9862, Dec. 2018.

C. X. Gao, M. Z. Gao, J. K. Si, Y. H. Hu, and C. Gan, “A novel direct-drive permanent magnet synchronous motor with toroidal windings,” Energies, DOI 10.3390/en12030432, 2019.

M. C. Sun, R. Y. Tang, X. Y. Han, and W. M. Tong, “Analysis of open circuit back electromotive force in slotless toroidal type windings axial flux permanent magnet machine,” Electric Machine and Control Application, vol. 44, no. 9, pp. 1-8. Sep. 2017.

S. L. Shi, E. L. Kang, and G. Y. Shi, “Optimization design of a permanent magnet linear motor using finite element and Taguchi method,” Micromotors, vol. 53, no. 3, pp. 33-37, Mar. 2020.

S. L. Shi and E. L. Kang, “Electromagnetic design and performance analysis of permanent magnet synchronous linear motor,” Micromotors, vol. 48, no. 3, pp. 25-28, July 2020.

Downloads

Published

2021-10-21

How to Cite

Chai , X. ., Si, J. ., Hu, Y. ., Li, Y. ., & Wang, D. . (2021). Characteristics Analysis of Double-Sided Permanent Magnet Linear Synchronous Motor with Three-Phase Toroidal Windings. The Applied Computational Electromagnetics Society Journal (ACES), 36(08), 1099–1107. Retrieved from https://journals.riverpublishers.com/index.php/ACES/article/view/11819

Issue

Section

Articles