Compact 2x2 and 4x4 MIMO Antenna Systems for 5G Automotive Applications

Authors

  • Mohamed O. Khalifa Department of Electrical Engineering Oakland University, Rochester, Michigan 48309, USA
  • Ahmad M. Yacoub Department of Electrical Engineering Oakland University, Rochester, Michigan 48309, USA
  • Daniel N. Aloi Department of Electrical Engineering Oakland University, Rochester, Michigan 48309, USA

Keywords:

Automotive antennas, correlation coefficient, 5G, 2x2 and 4x4 MIMO systems

Abstract

In this paper, three Vehicular multiple-input multiple-output (MIMO) 5G antenna systems have been constructed from using a newly developed 5G cellular branched Monopole element are presented. The MIMO systems operates in the 5G frequency bands (617MHz- 5GHz) with a compact structure that allows for up to four elements to be integrated in the same Sharkfin. The 3 configurations of MIMO systems have been simulated using HFSS, measured on a 1-meter ground plane (GND), then measured on a vehicle roof and the individual antenna parameters in terms of reflection coefficient and efficiency have captured. The MIMO antenna systems performance in terms of passive isolation, combined radiation pattern, envelope correlation coefficient (ECC), and diversity gain (DG) have been reported and discussed.

Downloads

Download data is not yet available.

Author Biographies

Mohamed O. Khalifa, Department of Electrical Engineering Oakland University, Rochester, Michigan 48309, USA

Mohamed O. Khalifa received the B.S. degree in Electrical and Electronic Engineering from University of Khartoum, Khartoum, Sudan, in 2010 and the M.S. degree in Electrical Engineering from King Fahd University of Petroleum and Minerals, Dhahran, KSA, in 2015. He is currently pursuing the Ph.D. degree in Electrical and Computer Engineering at Oakland University. He served as a Research Assistant at King Fahd University of Petroleum and Minerals, Visiting graduate Intern at I-Radio Lab within the School of Engineering at University of Calgary in Alberta, Canada and Research Assistant at Applied EMAG and Wireless Lab at Oakland University from 2012-2018. He has been employed in Ficosa North America, Madison Heights, Michigan from 2018-2019 then in Molex LLC, Grand Blanc, Michigan from 2019 until present. His research interests reside in area of Power Amplifier design and linearization techniques and applied electromagnetics with emphasis on antenna measurements, antenna modeling/analysis and antenna design. He has authored/ co-authored around 10 technical papers and is an inventor on 3 patents.

Ahmad M. Yacoub, Department of Electrical Engineering Oakland University, Rochester, Michigan 48309, USA

Ahmad M. Yacoub received the B.S. degree in Electrical Engineering from Princess Sumaya University for Technology Amman, Jordan, in 2014 and the M.S. degree in Electrical and Computer Engineering from Oakland University, Rochester, Michigan, in 2018. He is currently pursuing the Ph.D. degree in Electrical and Computer Engineering at Oakland University. He served as a Research Assistant at Applied EMAG and Wireless lab at Oakland University from 2016-2018. He has been employed in Molex LLC, Grand Blanc, Michigan from 2018 until present. Yacoub’s research interests reside in area of applied electromagnetics with emphasis on antenna measurements, antenna modeling/ analysis and antenna design. He is an inventor/coinventor of 2 patents.

Daniel N. Aloi, Department of Electrical Engineering Oakland University, Rochester, Michigan 48309, USA

Daniel N. Aloi received his B.S. (1992), M.S. (1996) and Ph.D. (1999) degrees in Electrical Engineering from Ohio University, located in Athens, Ohio, USA. He served as a Research Assistant from 1995-1999 in the Avionics Engineering Center within the School of Engineering and Computer Science at Ohio University; Summer Intern at Rockwell International in Cedar Rapids, Iowa, and Senior Project Engineer at OnStar, Incorporated, a subsidiary of General Motors from 2000-2002. He has been employed in the Electrical and Computer Engineering Department at Oakland University in Rochester, Michigan from 2002 until present. He is the Founder and Director of the Applied EMAG and Wireless Lab at Oakland University.
Aloi’s research interests reside in area of applied electromagnetics with emphasis on antenna measurements, antenna modeling/analysis and antenna design. He is a member of the Institute of Navigation and is a senior member of the Institute of Electrical and Electronics Engineers (IEEE). He has received in excess of $4M in research funding from a variety of federal and private entities including the Federal Aviation Administration, Defense Advanced Research Program Agency (DARPA) and the National Science Foundation (NSF). He has authored/co-authored over 100 technical papers and is an inventor on 5 patents.

References

J. Malik, D. Nagpal, and M. V. Kartikeyan, “MIMO antenna with omnidirectional pattern diversity,” Electronics Letters, vol. 52, no. 2, pp. 102-104, Jan. 2016.

L. Lanctot and O. Jonah, “Cellular antenna performance impact on MIMO in vehicle,” 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, Boston, MA, pp. 353-354, July 2018.

A. M. Elshirkasi, A. Abdullah Al-Hadi, M. F. Mansor, R. Khan, and P. J. Soh, “Envelope correlation coefficient of a two-port MIMO terminal antenna under Uniform and Gaussian angular power spectrum with user's hand effect,” Progress in Electromagnetics Research C, vol. 92, 123-136, Apr. 2019.

S. Zhekov, A. Tatomirescu, E. Foroozanfard, and G. F. Pedersen, “Experimental investigation on the effect of user’s hand proximity on a compact ultrawideband MIMO antenna array,” IET Microwaves, Antennas Propag., vol. 10, no. 13, pp. 1402-1410, Oct. 2016.

L. L. Nagy, Automobile Antennas, McGraw-Hill, New York, 2007.

K. L. Wong, Planar Antennas for Wireless Communications, Wiley Interscience, Hoboken, NJ, Jan. 2003.

V. Rabinovich, N. Alexandrov, and B. Alkhateeb, Automotive Antenna Design and Applications, CRC Press, Taylor & Francis, Boca Raton, FL, Dec. 2017.

S. Arianos, G. Dassano, F. Vipiana and M. Orefice, “Design of multi-frequency compact antennas for automotive communications,” IEEE Transactions on Antennas and Propagation, vol. 60, no. 12, pp. 5604-5612, Dec. 2012.

G. Artner, W. Kotterman, G. Del Galdo, and M. A. Hein, “Automotive antenna roof for cooperative connected driving,” IEEE Access, vol. 7, pp. 20083-20090, Jan. 2019.

H. J. Song, A. Bekaryan, J. H. Schaffner, T. Talty, D. Carper, E. Yasan, and A. Duzdar, “Evaluation of vehicle-level MIMO antennas: capacity, total embedded efficiency, and envelope correlation,” 2014 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), Palm Beach, FL, pp. 89-92, Aug. 2014.

O. Kwon, R. Song, and B. Kim, “A fully integrated shark-fin antenna for MIMO-LTE, GPS, WLAN, and WAVE applications,” IEEE Antennas and Wireless Propagation Letters, vol. 17, no. 4, pp. 600-603, Apr. 2018.

V. Franchina, A. Michel, P. Nepa, M. Gallo, R. Parolari, A. P. Filisan, and D. Zamberlan, “A compact 3D antenna for automotive LTE MIMO applications,” 2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), Verona, Italy, pp. 326- 329, Oct. 2017.

A. Heiman, A. Badescu, and A. Saftoiu, “A new multiple input multiple output V2V automotive antenna for long term evolution band applications,” 2018 International Symposium on Fundamentals of Electrical Engineering (ISFEE), Bucharest, Romania, pp. 1-5, Nov. 2018.

D. Preradovic and D. N. Aloi, “Cross polarized 2x2 LTE MIMO system for automotive shark fin application,” The Applied Computational Electromagnetics Society (ACES), vol. 35, no. 10, pp. 1207-1216, Oct. 2020.

C. Demien and R. Sarkis, “Design of shark fin integrated antenna systems for automotive applications,” 2019 PhotonIcs & Electromagnetics Research Symposium - Spring (PIERS-Spring), Rome, Italy, pp. 620-627, June 2019.

A. Thiel, L. Ekiz, O. Klemp, and M. Schultz, “Automotive grade MIMO antenna setup and performance evaluation for LTE-communications,” 2013 International Workshop on Antenna Technology (iWAT), Karlsruhe, pp. 171-174, Mar. 2013.

Y. Liu, Z. Ai, G. Liu, and Y. Jia, “An Integrated shark-fin antenna for MIMO-LTE, FM, and GPS applications,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 8, pp. 1666-1670, Aug. 2019.

N. Guan, H. Tayama, M. Ueyama, Y. Yoshijima, and H. Chiba, “A roof automobile module for LTE-MIMO antennas,” 2015 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), Turin, pp. 387-391, Sep. 2015.

S. Hastürkoğlu, M. Almarashli, and S. Lindenmeier, “A compact wideband terrestial MIMO-Antenna set for 4G, 5G, WLAN and V2X and evaluation of its LTE-Performance in an urban region,” 2019 13th European Conference on Antennas and Propagation (EuCAP), Krakow, Poland, pp. 1-5, Mar. 2019.

O. Jonah, “5G antenna for automotive applications,” 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, pp. 1493-1494, Web, July 2020.

T. Jiang, T. Jiao, and Y. Li, “A low mutual coupling MIMO antenna using periodic multilayered electromagnetic band gap structures,” The Applied Computational Electromagnetics Society (ACES), vol. 33, no. 3, Mar. 2018.

F. Liu, J. Guo, L. Zhao, G. Huang, Y. Li, and Y. Yin “Ceramic superstrate-based decoupling method for two closely packed antennas with crosspolarization suppression,” IEEE Transactions on Antennas and Propagation, vol. 69, no. 3, pp. 1751-1756, Mar. 2021.

S. Luo, Y. Li, Y. Xia, G. Yang, L. Sun, and L. Zhao, “Mutual coupling reduction of a dual-band antenna array using dual-frequency metamaterial structure,” The Applied Computational Electromagnetics Society (ACES), vol. 34, no. 3, pp. 403- 410, Mar. 2019.

A. Mansoor and R. Amiri, “Mutual coupling reduction of closely spaced MIMO antenna using frequency selective surface based on metamaterials,” The Applied Computational Electromagnetics Society (ACES), vol. 32, no. 12, pp. 1064-1068, Dec. 2017.

K. Yu, Y. Li, and X. Liu, “Mutual coupling reduction of a MIMO antenna array using 3-D novel meta-material structures,” The Applied Computational Electromagnetics Society (ACES), vol. 33, no. 7, pp. 758-763, July 2018.

S. Luo, Y. Li, Y. Xia, and L. Zhang “A low mutual coupling antenna array with gain enhancement using metamaterial loading and neutralization line structure,” The Applied Computational Electromagnetics Society (ACES), vol. 34, no. 3, pp. 411- 418, Mar. 2019.

J. Jiang, Y. Xia, and Y. Li “High isolated X-band MIMO array using novel wheel-like metamaterial decoupling structure,” The Applied Computational Electromagnetics Society (ACES), vol. 34, no. 12, pp. 1829-1836, Dec. 2019.

S. F. Beegum and S. K. Mishra, “Compact WLAN band-notched printed ultrawideband MIMO antenna with polarization diversity,” Progress in Electromagnetics Research C, vol. 61, pp. 149-159, Jan. 2016.

K. Sreelakshmi, P. Bora, M. Mudaliar, Y. Dhanade, and B. T. P. Madhav, “Linear array Yagi-Uda 5G antenna for vehicular application,” International Journal of Engineering & Technology, vol. 7. pp. 513-517, Dec. 2017.

D. Potti, Y. Tusharika, M. G. N. Alsath, S. Kirubaveni, M. Kanagasabai, R. Sankararajan, S. Narendhiran, and P. B. Bhargav, “A novel optically transparent UWB antenna for automotive MIMO communications,” IEEE Transactions on Antennas and Propagation, vol. 69, pp. 3821-3828, July 2021.

Downloads

Published

2021-11-04

How to Cite

[1]
M. O. . Khalifa, A. M. . Yacoub, and D. N. . Aloi, “Compact 2x2 and 4x4 MIMO Antenna Systems for 5G Automotive Applications”, ACES Journal, vol. 36, no. 06, pp. 762–778, Nov. 2021.

Issue

Section

Articles