Complementary SRR-Based Reflector to Enhance Microstrip Antenna Performance

Authors

  • Mustafa H. B. Ucar Information Systems Engineering Department Kocaeli University, Umuttepe Campus, 41001 Kocaeli, Turkey

Keywords:

Complementary split ring resonator, microstrip antennas, reflector, split ring resonator

Abstract

In this paper, complementary split ring resonator (SRR) based reflector to enhance the printed slot dipole (PSD) antenna performance is introduced. The numerically calculated return-loss, directivity and radiation pattern results of the PSD antenna, with (w/) and without (w/o) CSRR element etched on reflector plane are presented and investigated. Numerical analysis and modelling of the proposed design are carried out using CST Microwave Studio simulator based on the finite integration technique. According to the simulation results, with the inclusion of the CSRR-based reflector into the PSD antenna, the directivity is increased by values changes from 0.6 dB to 4.25 dB through the operation band, while an improvement in bandwidth (~2.1%) is seen. It is also shown that this improvement in antenna performance is due to the ε-negative (ENG) behavior of CSRR structures. Prototype of the proposed antenna is fabricated using Arlon DiClad 880 substrate with electrical permittivity of εr= 2.2. A quite good agreement between simulation and measurement is obtained. In this study, it is shown that the radiation performance of the antenna can be increased easily by using the CSRR element as a reflector in the antenna structure with a new enhancement approach. Also, the proposed antenna with a compact size of 0.27λ × 0.41λ is appropriate for operating in IEEE 802.11b/g/n/ax (2.4 GHz) WLAN applications.

Downloads

Download data is not yet available.

Author Biography

Mustafa H. B. Ucar, Information Systems Engineering Department Kocaeli University, Umuttepe Campus, 41001 Kocaeli, Turkey

Mustafa Hikmet Bilgehan Ucar was born in Istanbul, Turkey, in 1982. He received his B.S., M.S., and Ph.D. degrees from Kocaeli University, Kocaeli, Turkey, all in Electronics and Computer Education Department in 2004, 2007, and 2013, respectively. He currently serves as an Assistant Professor in the Department of Information Systems Engineering, Kocaeli University, Turkey. His main research interests include numerical analysis and design of reconfigurable antennas/arrays/EM filters and frequency selective surfaces for various communication applications. His research also focuses on embedded systems, user interface design and its usability.

References

R. Garg, P. Bhartia, I. Bahl, and A. Ittipiboon Microstrip Antenna Design Handbook, Artech House, Reading, MA, 2001.

G. Kumar and K. P. Ray, Broadband Microstrip Antenna, Norwood, MA, 2003.

S. Peddakrishna, T. Khan, and B. K. Kanaujia, “Resonant characteristics of aperture type FSS and its application in directivity improvement of microstrip antenna,” AEU- International Journal of Electronics and Communications, vol. 79, pp. 199-206, Sept. 2017.

M. H. B. Ucar, A. Sondas, and Y. E. Erdemli, “Dual-band loop-loaded printed dipole antenna with a wideband microstrip balun structure,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 27, no. 6, pp. 458-465, June 2012.

M. H. B. Ucar and Y. E. Erdemli, “Triple-band microstripline-fed printed wide-slot antenna for WiMAX/WLAN operations,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 29, no. 10, pp. 793-800, Oct. 2014.

S. C. Basaran, U. Olgun, and K. Sertel, “Multiband monopole antenna with complementary split-ring resonators for WLAN and WiMAX applications,” Electron Lett., vol. 49, no. 10, pp. 636-638, May 2013.

N. T. Selvi, P. T. Selvan, S. P. K. Babu, and R. Pandeeswari, “Multiband metamaterial-inspired antenna using split ring resonator,” Computers & Electrical Engineering, vol. 84, 106613, pp. 1-13, 2020.

A. Sondas, M. H. B. Ucar, and Y. E. Erdemli, “Tunable SRR-based substrate for a microstrip patch antenna,” Turk. J. Elec. & Eng. Comp. Sci., vol. 20, no. 1, pp. 159-168, Jan. 2012.

W. Cao, W. Ma, W. Peng, and Z. N. Chen, “Bandwidth-enhanced electrically large microstrip antenna loaded with SRR structures,” IEEE Antennas Wireless Propagat. Lett., vol. 18, no. 4, pp. 576-580, Apr. 2019.

A. Sharma, D. Gangwar, K. B. Kumar, and S. Dwari, “RCS reduction and gain enhancement of SRR inspired circularly polarized slot antenna using metasurface,” AEU - International Journal of Electronics and Communications; vol. 91, pp. 132- 142, May 2018.

D. Kaushal and T. Shanmuganantham, “Parametric enhancement of a novel microstrip patch antenna using circular SRR loaded fractal geometry,” Alexandria Engineering Journal, vol. 57, no. 4, pp. 2551-2557, Dec. 2018.

T. Yue, Z. H. Jiang, A. H. Panaretos, and D. H. Werner, “A compact dual-band antenna enabled by a complementary split-ring resonator-loaded metasurface,” IEEE Trans. Antennas Propagat., vol. 65, no. 12, pp. 6878-6888, Dec. 2017.

M. Rezvani and Y. Zehforoosh, “A dual-band multiple-input multiple-output microstrip antenna with metamaterial structure for LTE and WLAN applications,” AEU - International Journal of Electronics and Communications, vol. 93, pp. 277- 282, Sept. 2018.

B. Urul, “Gain enhancement of microstrip antenna with a novel DNG material,” Micro. Opt. Technol. Lett., vol. 62, no. 4, pp. 1824-1829, Jan. 2020.

P. K. Panda and D. Ghosh, “Isolation and gain enhancement of patch antennas using EMNZ superstrate,” AEU - International Journal of Electronics and Communications, vol. 86, pp. 164- 170, Mar. 2018.

J. A. Brown, S. Barth, B. P. Smyth, and A. K. Tyer, “Dual-band microstrip corporate feed network using an embedded metamaterial-based EBG,” IEEE Trans. Antennas Propagat., vol. 67, no. 11, pp. 7031-7039, Nov. 2019.

B. A. Mouris, A. Fernandez-Prieto, R. Thobaben, J. Martel, F. Mesa, and O. Quevedo-Teruel, “On the increment of the bandwidth of mushroom-type EBG structures with glide symmetry,” IEEE Trans. Microw. Theory Tech., vol. 68, no. 4, pp. 1365- 1375, Apr. 2020.

T. K. Das, B. Dwivedy, and S. K. Behera, “Design of a meandered line microstrip antenna with a slotted ground plane for RFID applications,” AEU-International Journal of Electronics and Communications, vol. 118, 153130, pp. 1-7, May 2020.

N. Pouyanfar, C. Ghobadi, and J. Nourinia, “A compact multi-band MIMO antenna with high isolation for C and X bands using defected ground structure,” Radioengineering, vol. 27, no. 3, pp. 686-693, Sept. 2018.

J. B. Pendry, A. J. Holden, D. J. Robbins, and W. J. Stewart, “Magnetism from conductors and enhance nonlinear phenomena,” IEEE Trans. Microw. Theory Tech., vol. 47, no. 11, pp. 2075- 2084, Nov. 1999.

F. Falcone, T. Lopetegi, M. A. G. Laso, J. D. Baena, J. Bonache, M. R. Beruete, F. Martin, and M. Sorolla, “Babinet principle applied to the design of metasurfaces and metamaterials,” Phys. Rev. Lett., vol. 93, no. 19, 197401, pp. 1-4, Nov. 2004.

F. Falcone, T. Lopetegi, J. D. Baena, R. Marques, F. Martin, and M. Sorolla, “Effective negative-ε stopband microstrip lines based on complimentary split ring resonators,” IEEE Microwave and Wireless Component Letters, vol. 14, no. 6, pp. 280-282, June 2004.

CST Microwave Studio, ver. 2008, Computer Simulation Technology, Framingham, MA, 2008.

X. Chen, T. M. Grzegorczyk, B. I. Wu, J. Pacheco Jr, and J. A. Kong, “Robust method to retrieve the constitutive effective parameters of metamaterials,” Phys. Rev.-E, vol. 70, no. 1, 016608, pp. 1-7, July 2004.

Downloads

Published

2021-11-04

How to Cite

[1]
M. H. B. . Ucar, “Complementary SRR-Based Reflector to Enhance Microstrip Antenna Performance”, ACES Journal, vol. 36, no. 06, pp. 779–789, Nov. 2021.

Issue

Section

Articles