Interaction Magnetic Force of Cuboidal Permanent Magnet and Soft Magnetic Bar Using Hybrid Boundary Element Method
DOI:
https://doi.org/10.13052/2021.ACES.J.361114Keywords:
Hybrid boundary element method, magnetization charges, magnetic force, cuboidal permanent magnetAbstract
The hybrid boundary element method for solving a three-dimensional magnetostatic problem is presented in this paper for the first time. The interaction force between the cuboidal permanent magnet and the bar, made of soft magnetic material, is calculated. Results of the presented approach are confirmed using COMSOL Multiphysics as well as with the results of the image theorem that is applicable when the dimensions of the bar are large enough; so it could be considered an infinite soft magnetic plane.
Downloads
References
C. A. Brebbia, J. C. F. Telles, and L. C. Wrobel, Boundary Element Techniques. Theory and Applications in Engineering, Springer, Berlin, 1984.
N. B. Raičević, “Conformal mapping and equivalent electrodes method application of electric field determination at cable accessories,” Discrete and Computational Mathematics, Nova Publishers, New York, USA, chapter 14, pp. 205-214, 2008.
N. B. Raičević and S. S. Ilić, “Equivalent electrode method application on anisotropic micro strip lines calculations,” Int. Conf. on Electromagnetics in Advanced Applications ICEAA 07, Torino, Italy, paper 122 (CD), Sep. 2007.
N. B. Raičević, “One method for multilayer dielectric system determination,” 8th Int. Conf. on Applied Electromagnetics PES 2007, Niš, Serbia, Sep. 2007.
N. B. Raičević, S. R. Aleksić, and S. S. Ilić, “A hybrid boundary element method for multi-layer electrostatic and magnetostatic problems,” Journal of Electromagnetics, no. 30, pp. 507-524, 2010.
N. B. Raičević, S. S. Ilić, and S. R. Aleksić, “Application of new hybrid boundary element method on the cable terminations,” 14th International IGTE Symposium, Graz, Austria, pp. 56-61, Sep. 2010.
D. Li and L. Di. Rizenzo, “Boundary element computation of line parameters of on-chip interconnects on lossy silicon substrate,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 26, no. 9, pp. 716-722, Sep. 2011.
D. M. Veličković, “Equivalent electrodes method,” Scientific Review, no. 21-22, pp. 207-248, 1996.
A. N. Vučković, D. M. Vuckovic, M. T. Perić, and N. B. Raičević, “Influence of the magnetization vector misalignment on the magnetic force of permanent ring magnet and soft magnetic cylinder,” International Journal of Applied Electromagnetics and Mechanics, vol. 65, no. 3, pp. 417-430, Mar. 2021.
A. N. Vučković, N. B. Raičević, and M. T. Perić, “Radially magnetized ring permanent magnet modelling in the vicinity of soft magnetic cylinder,” Safety Engineering, vol. 8, no. 1. pp. 33-37, Jun. 2018.
S. Ilić, M. Perić, S. Aleksić, and N. Raičević, “Hybrid boundary element method and quasi-TEM analysis of 2D transmission lines – generalization,” Electromagnetics, vol. 33, no. 4, pp. 292-310, Apr. 2013.
M. T. Perić, S. S. Ilić, S. R. Aleksić, and N. B. Raičević, “Application of hybrid boundary element method to 2D microstrip lines analysis,” International Journal of Applied Electromagnetics and Mechanics, vol. 42, no. 2, pp. 179-190, 2013.
M. T. Perić, S. S. Ilić, A. N. Vučković, and N. B. Raičević, “Improving the efficiency of hybrid boundary element method for electrostatic problems solving,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 35, no. 8, pp. 872-877, Aug. 2020.
S. S. Ilić, N. B. Raičević, and S. R. Aleksić, “Application of new hybrid boundary element method on grounding systems,” 14th International IGTE Symposium, Graz, Austria, pp. 160-165, Sep. 2010.
S. Ilić, D. B. Jovanović, A. N. Vučković, and M T. Perić, “External inductance per unit length calculation of two wire line in vicinity of linear magnetic material,” 14th Int. Conf. on Applied Electromagnetics PES 2019, Niš, Serbia, Sep. 2019.
H. Allag, J.P. Yonnet, H. Bouchekara, M. Latreche, and C. Rubeck, “Coulombian model for 3D analytical calculation of the torque exerted on cuboidal permanent magnets with arbitrary oriented polarizations,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 30, no. 4, pp. 351-356, Apr. 2015.
J. Ren, L.Yang, and J. Ren, “Study on spatial magnetic field intensity distribution of rectangular permanent magnets based on Matlab,” Applied Computational Electromagnetics Society Conference, vol. 46, no. 1, pp. 255-269, 2014.
A. N. Vučković, N. B. Raičević, S. S. Ilić, and S. R. Aleksić, “Interaction magnetic force calculation of radial passive magnetic bearing using magnetization charges and discretization technique,” International Journal of Applied Electromagnetics and Mechanics, vol. 43, no. 4, pp. 311-323, 2013.
W. S. Robertson, B. S. Cazzolato, and A. C. Zander, “A simplified force equation for coaxial cylindrical magnets and thin coils,” IEEE Transactions on Magnetics, vol. 47, pp. 2045-2049, Aug. 2011.
R. Ravaud, G. Lemarquand, and V. Lemarquand, “Force and stiffness of passive magnetic bearings using permanent magnets. Part 1: Axial magnetization,” IEEE Transactions on Magnetics, vol. 45, pp. 2996-3002, Jul. 2009.
M. Lahdo, T. Strohla, and S. Kovalev, “Magnetic propulsion force calculation of a 2-DoF large stroke actuator for high-precision magnetic levitation system,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 32, no. 8, pp. 663-669, Aug. 2017.
G. Akoun and J. P. Yonnet, “3D analytical calculation of the forces exerted between two cuboidal magnets,” IEEE Transactions on Magnetics, vol. 20, pp. 1962-1964, Sep. 1984.
Ana N. Vučković, Saša S. Ilić, and Slavoljub R. Aleksić, “Interaction magnetic force calculation of ring permanent magnets using Ampere’s microscopic surface currents and discretization technique,” Electromagnetics, vol. 32, no. 2, pp. 117-134, Jan. 2012.
M. Braneshi, O. Zavalani, and A. Pijetri, “The use of calculating function for the evaluation of axial force between two coaxial disk coils,” Third International PhD Seminar on Computational Electromagnetics and Technical Application, Banja Luka, Bosnia and Hertzegovina, pp. 21–30, Aug. 2006.
A. N. Vučković, S. R. Aleksić, and S. S. Ilić, “Calculation of the attraction and levitation forces using magnetization charges,” 10th Int. Conf. on Applied Electromagnetics PES 2011, CD Proceedings, Niš, Serbia, pp. 33-55, Sep. 2011.
J. L. G. Janssen, J. J. H. Paulides, and E. A. Lomonova, “3-D analytical calculation of the torque between perpendicular magnetized magnets in magnetic suspension,” IEEE Trans. on Magnetics, vol. 47, no. 10, pp. 4286-4289, Oct. 2011.
H. Allag and J. P. Yonnet, “3-D Analytical calculation of the torque and force exerted between two cuboidal magnets,” IEEE Trans. on Magnetics, vol. 45, no. 10, pp. 3969-3972, Oct. 2009.
M. Aissaoui, H. Allag, and J. P. Yonnet, “Mutual inductance and interaction calculation between conductor or coil of rectangular cross section andparallelepiped permanent magnet,” IEEE Trans. on Magnetics, vol. 50, no. 11, Nov. 2014.
M. Beleggia, D. Vokoun, and M. D. Graef, “Forces between a permanent magnet and a soft magnetic plate,” IEEE Magnetics Letters, vol. 3, 2012.
E. P. Furlani, Permanent Magnet and Electromechanical Devices: Materials, Analysis and Applications, Academic Press, London, 6th edition, 2001.