Calculation and Characteristics Analysis for Radiated Electromagnetic Field of High Voltage Converter Valve
DOI:
https://doi.org/10.13052/2022.ACES.J.370512Keywords:
radiated electromagnetic field, converter valve, MoM, a DC transmission simulation system, a 3D calculation modelAbstract
Calculation and analysis of the radiated electromagnetic field by the high voltage converter valve are very important for the electromagnetic compatibility analysis between the various components of the converter system. First, the electromagnetic radiation calculation process of the converter valve is proposed. Then, according to the actual engineering application, a DC transmission simulation system of the converter system was built, and the current of the converter valve tower arm was obtained. Subsequently, according to the actual size, a 3D calculation model of the converter valve tower was established, and an MoM-based calculation method for the electromagnetic field of the converter valve tower was proposed. Finally, the attenuation characteristics and azimuth characteristics of the converter valve tower are analyzed, and the distribution rules of the radiated electromagnetic field inside the high voltage converter valve hall are clarified, which provide a theoretical foundation for the evaluation of the electromagnetic compatibility of the converter system.
Downloads
References
M. Wang, T. An, H. Ergun, Y. Lan, B. Andersen, M. Szechtman, and W. Leterm, et al., “Review and outlook of HVDC grids as backbone of transmission system,” CSEE Journal of Power and Energy Systems, vol. 7, no. 4, pp. 797-810, Jul. 2021.
B. Gao, F. Yang, M. Chen, P. Duan, Q.-J. Peng, and Y. Yang, “An improved mlpg method and application in the calculation Of electro-thermal field Of transmission line,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 30, no. 02, pp. 157-166, Aug. 2021.
H. Lee, M. Asif, K. Park, and B. Lee, “Feasible application study of several types of superconducting fault current limiters in HVDC grids,” IEEE Transactions on Applied Superconductivity, vol. 28, no. 4, pp. 1-5, Jun. 2018.
E. Jin, Z. Song, X. Yang, and X. Yu, “Improved thevenin equivalent model of MMC considering pre-charge conditions and DC side fault conditions,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 6, pp. 796-805, Nov. 2021.
S. M. M. Mirtalaei, S. H. H. Sadeghi, and R. Moini, “A method-of-moments model for determination of radiated magnetic field from switch-mode power supplies components using near-field measurement data,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 28, no. 08, pp. 672-679, Oct. 2021.
R. T. Harrold, “The spectrum analyzer to the measurement of EHV power line noise,” IEEE Transactions on Power Apparatus and Systems, vol. 90, no. 2, pp. 1837-1847, 1971.
S. A. Annestrand, “Radio interference from HVDC converter stations,” IEEE Transactions on Power Apparatus and Systems, PAS-90(3), pp. 874-882, 1972.
P. S. Maruvada and T. Gilsig, “A method of calculating the RI from HVDC converter stations,” IEEE Transactions on Power Apparatus and Systems, vol. 92, no. 3, pp. 1009-1018, 1973.
A. R. Morse, “Field measurements on the Nelson River HVDC line including comparisons with test line data and calculated profiles,” Proceedings of the Canadian PowerConference, Montreal, Canada, pp. 437-440, 1976.
A. R. Morse, “Field measurements of station-generated RI on the Nelson River HVDC line,” Proceedings of the International Electrical and Electronics Conference, Toronto, Canada, pp. 78-79, 1976.
D. J. Melvolil, L. Haglof, and P. Degn, “Carrier frequency harmonics generated by HVDC conversion,” IEEE Transactions on Power Apparatus and Systems, vol. 99, no. 2, pp. 564-575, 1980.
G. H. Bacon, D. L. Hedrick, and J. J. Fiedler, “Power line carrier application considerations involving HVDC transmission,” IEEE Transactions on Power Apparatus and System, vol. 99, no. 3, pp. 1089-1096, 1980.
B. W. Jakel and Q.-B. Tu, “Electromagnetic environment near HVDC thyristor valves // 11th international symposium on high voltage engineering,” vol. 2, no. 2, pp. 47-50, 1999.
Y. Liu, S. A. Sebo, and R. Caldecott, “Modeling of converter transformer using frequency domain terminal impedance measurements,” IEEE Transactions on Power Delivery, vol. 8, no. 1, pp. 66-72, 1993.
D. G. Kasten, R. Caldecott, S. A. Sebo, and Y. Liu, “A computer program for HVDC Converter station RF noise calculations,” IEEE Transactions on Power Delivery, vol. 9, no. 2, pp. 750-755, Apr. 1994.
P. S. Maruvada, R. A. Malewski, and P. S. Wong, “Measurement of the electromagnetic environment of HVDC converter stations,” IEEE Power Engineering Review, vol. 9, no. 4, pp. 73-74, 2007.
R. Caldecott, R. V. Devore, and D. G. Kasten, “HVDC converter station tests in the 0.1 to 5MHz frequency,” IEEE Transactions on Power Delivery, vol. 3, no. 3, pp. 971-977, 1988.
Y. Murata, S. Tanabe, and M. Tadokoroetc, “3D-MoM analysis of radio frequency noise radiation from HVDC converter station,” IEEE International Symposium, pp. 980-985, 1999.
