Compact Dual-Band Bandpass Filter Based on SSL-SIR With Sharp Roll-Off
DOI:
https://doi.org/10.13052/2021.ACES.J.361214Keywords:
DB-BPF, 0。feed structure, SSL-SIRAbstract
A compact dual-band bandpass filter (DB-BPF) is studied and implemented by using shorted stub-loaded stepped impedance resonator (SSL-SIR) and 0∘∘feed structure in this paper. The resonance frequencies of SSL-SIR can be analyzed and explained by odd−-even mode analysis method and it is used in the design of BPF I. Then, the BPF II is created using the theory of 0∘∘feed structure. Finally, the two structures are combined together to form a DB-BPF by reasonably adjusting the coupling between them and the position of the feed points. The simulation results suggest that the center frequencies of the two passbands are 3.45 and 5.2 GHz, respectively, which are suitable for modern wireless communication systems like 5G and WLAN. Compact size, strong passband isolation, and large stopband bandwidth are all advantages of the proposed DB-BPF filter. A prototype is created and constructed to validate this. The simulated results are in good agreement with the measured results.
Downloads
References
M. A. Pahlavani, M. Moradkhani, and R. Sayadi, “New design of an adjustable compact microstrip lowpass filter using Z-shaped resonators with low VSWR,” Microwave and Optical Technology Letters, vol. 62, no. 11, pp. 3527-3535, Jun. 2020.
Q. Li, X. Chen, P. L. Chi, and T. Yang, “Tunable bandstop filter using distributed coupling microstrip resonators with capacitive terminal,” IEEE Microwave and Wireless Components Letters, vol. 30, no. 1, pp. 35-38, Jan. 2019.
L. Gao, T. W. Lin, and G. M. Rebeiz. “Design of tunable multi-pole multi-zero bandpass filters and diplexer with high selectivity and isolation,” IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 66, no. 99, pp. 3831-3842, Oct. 2019.
A. Bandyopadhyay, P. Sarkar, T. Mondal, and R. Ghatak, “A Dual Function Reconfigurable Bandpass Filter for Wideband and Tri-band Operations,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 68, no. 6, pp. 1892-1896, Jan. 2021.
J. Hu, Y. Li, D. Zeng, W. Xu, and G. Lu “Design of a broadband microstrip bandpass filter,” 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, pp. 315-316, Jul. 2020.
Z. Troudi, Jan Machá, and L. Osman, “Compact dual-band bandpass filter using a modified hexagonal split ring resonator,” Microwave and Optical Technology Letters, vol. 62, no. 5, pp. 1893-1899, Jan. 2020.
X. K. Bi, X. Zhang, S. W. Wong, T. Yuan, and S. H. Guo, “Design of equal-ripple dual-wideband bandpass filter with minimum design parameters based on cross-shaped resonator,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, no. 10, pp. 1780-1784, Oct. 2019.
F. Wei, J. H. Yu, C. Y. Zhang, C. Zeng, and X. W. Shi, “Compact balanced DB-BPFs based on short and open stub loaded resonators with wide common-mode suppression,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, no. 12, pp. 3043-3047, Dec. 2020.
C. Liang, Y. Liu, and F. Tai, “Compact bandpass filters using folded quad-mode stub-loaded loop resonators,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 35, no. 10, pp. 1217-1221, Oct. 2020.
R. Yin, W. Feng, and W. Che, “High selectivity dual-band bandpass filters using dual-mode resonators,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 32, no. 9, pp. 800-805, Sep. 2017.
W. Jiang, W. Shen, T. Wang, Y. M. Huang, Y. Peng, and G. Wang, “Compact dual-band filter using open/short stub loaded stepped impedance resonators (OSLSIRs/SSLSIRs),” IEEE Microwave and Wireless Components Letters, vol. 26, no. 9, pp. 672-674, Aug. 2016.
P. Wen, Z. Ma, H. Liu, S. Zhu, M. Ohira, C. Wang, X. Guan, and B. Ren, “Novel compact DB-BPF using stub-loaded shorted stepped-impedance resonators,” 2018 Asia-Pacific Microwave Conference (APMC), pp. 22-24, Nov. 2018.
D. Li, Y. Zhang, X. Feng, K. Song, and Y. Fan, “Dual-band bandpass filter with controllable center frequency and bandwidth using short stub-loaded SIR and tri-section SIR,” AEU-International Journal of Electronics and Communications, vol. 69, no. 7, pp. 1004-1009, Jul. 2015.
M. H. Weng, C. Y. Huang, S. W. Dai, and R. Y. Yang, “An improved stopband dual-band filter using quad-mode stub-loaded resonators,” Electronics, vol. 10, no. 2, pp. 142, Jan. 2021.
D. Li, J. A. Wang, Y. Liu and Z. Chen, “Miniaturized dual-band bandpass filter with sharp roll-off using ring-loaded resonator,” IEEE Access, vol. 8, pp. 25588-25595, Feb. 2020.
S. Y. Lee and C. M. Tsai, “New cross-coupled filter design using improved hairpin resonators,” IEEE Transactions on Microwave Theory Techniques, vol. 48, no. 12, pp. 2482-2490, Dec.2000.
T. C. Edwards and M. B. Steer, “Foundations for microstrip circuit design,” John Wiley and Sons, 2016.
C. M. Tsai, S. Y. Lee and C. C. Tsai, “Performance of a planar filter using a 0∘ feed structure,” IEEE Transactions on Microwave Theory and Techniques, vol. 50, no. 10, pp. 2362-2367, Dec. 2002.