Fundamental and Magnetic Force Analysis of an External Rotor Switched Reluctance Motor
Keywords:
Fundamental and Magnetic Force Analysis of an External Rotor Switched Reluctance MotorAbstract
This paper presents a novel three-phase 6/8 external rotor switched reluctance motor. Such a construction not only leads to reduce the total weight and volume, but also increases the total efficiency in a small size motor. Three dimensional finite element method is applied to evaluate the main characteristics of the proposed motor such as magnetic flux density, flux linkage, self-inductance, mutual inductance, and output torque. Moreover, this paper investigates the radial force components of the motor. This assessment is carried out under different forced current levels with the respect to critical rotor positions. From the motor analysis results, it is considered that the proposed motor has great advantages over the conventional type in its magnetic profiles.
Downloads
References
H. J. Chen, D. Q. Jiang, and J. Yang et al., “A New
Analytical Model for Switched Reluctance
Motors,” IEEE Transactions on Magnetics, vol. 45,
no. 8, pp. 3107-3113, August, 2009.
M. Nguyen, Y. Jung, and H. Yang et al.,
“Harmonic Intensity Reduction Technique for
Single Phase Switched Reluctance Motor Drives
Using a New Random PWM Scheme,” Journal of
Power Electronics, vol. 10, no. 1, pp. 51-57, 2010.
G. J. Li, J. Ojeda, and E. Hoang et al.,
“Comparative Studies Between Classical and
Mutually Coupled Switched Reluctance Motors
Using Thermal-Electromagnetic Analysis for
Driving Cycles,” IEEE Transactions on Magnetics,
vol. 47, no. 4, pp. 839 - 847, 2011.
W. Ding, D. Liang, and H. Sui, “Dynamic
Modeling and Performance Prediction for Dual-
Channel Switched Reluctance Machine
Considering Mutual Coupling,” IEEE Transactions
on Magnetics, vol. 46, no. 9, pp. 3652 – 3663,
J. Cai, Z. Q. Deng, and R. Y. Qi et al., “A Novel
BVC-RBF Neural Network Based System
Simulation Model for Switched Reluctance
Motor,” IEEE Transactions on Magnetics, vol. 47,
no. 4, pp. 830 - 838, 2011.
J. Du, D. Liang, and L. Xu et al., “Modeling of a
Linear Switched Reluctance Machine and Drive for
Wave Energy Conversion Using Matrix and Tensor
Approach,” IEEE Transactions on Magnetics, vol.
, no. 6, pp. 1334 - 1337, 2010.
W. Ding and D. Liang, “Modeling of a 6/4
Switched Reluctance Motor Using Adaptive Neural
Fuzzy Inference System,” IEEE Transactions on
Magnetics, vol. 44, no. 7, pp. 1796-1804, 2008.
F. Daldaban and N. Ustkoyuncu, “New Disc Type
Switched Reluctance Motor for High Torque
Density,” Energy Conversion and Management,
vol. 48, no. 8, pp. 2424-2431, 2007.
J. H. Park, S. M. Jang, and J. Y. Choi et al.,
“Dynamic and Experimental Performance of
Linear-Switched Reluctance Machine With
Inductance Variation According to Airgap
Length,” IEEE Transactions on Magnetics, vol. 46,
no. 6, pp. 2334 – 2337, 2010.
M. D. Hennen and R. W. De Doncker,
“Comparison of Outer- and Inner-Rotor Switched
Reluctance Machines,” in 7th International
Conference on Power Electronics and Drive
Systems, Thailand, pp. 702-706, 2007.
L. Jiongkang and et al., “Experimental
Investigation of In-Wheel Switched Reluctance
Motor Driving System for Future Electric
Vehicles,” in 3rd International Conference on
Power Electronics Systems and Applications,
PESA, Hong Kong, pp. 1-6, 2009.
D. Wen and L. Deliang, “Modeling of a 6/4
Switched Reluctance Motor Using Adaptive Neural
Fuzzy Inference System,” IEEE Transactions on
Magnetics, vol. 44, no. 7, pp. 1796-1804, 2008.
L. Feng-Chieh and Y. Sheng-Ming, “Instantaneous
Shaft Radial Force Control with Sinusoidal
Excitations for Switched Reluctance Motors,”
IEEE Transactions on Energy Conversion, vol. 22,
no. 3, pp. 629-636, 2007.
E. Afjei, H. Torkaman, and B. Mazloomnezhad, “A
New Double Layer per Phase Configuration for
Switched Reluctance Motor,” in IEEE International
Conference on Power and Energy (PECON), Kuala
Lumpur, Malaysia, pp. 222-225, 2010.
E. Afjei and H. Torkaman, “The Novel Two Phase
Field-Assisted Hybrid SRG: Magnetio Static Field
Analysis, Simulation, and Experimental
Confirmation,” Progress in Electromagnetics
Research B, PIER, vol. 18, pp. 25-42, 2009.
E. Afjei, and H. Torkaman, “Comparison of Two
Types of Dual Layer Generator in Field Assisted
Mode Utilizing 3D-FEM and Experimental
Verification,” Progress in Electromagnetics
Research B, PIER, vol. 23, pp. 293-309, 2010.
TORKAMAN, ARBAB, KARIM, AFJEI: ANALYSIS OF AN EXTERNAL ROTOR SWITCHED RELUCTANCE MOTOR
E. Afjei and H. Torkaman, “Finite Element
Analysis of SRG under Fault Condition Oriented
Towards Diagnosis of Eccentricity Fault,” Applied
Computational Electromagnetics Society, vol. 26,
no. 1, pp. 8-16, 2011.
H. Torkaman, M. S. Toulabi, and E. Afjei,
“Electromagnetic Analysis of the Effects of Static
Eccentricity Fault on the Radial Force Variations in
Switched Reluctance Motors,” International
Review on Modelling and Simulations, vol. 4, no.
, pp. 585-590, 2011.
H. Torkaman, E. Afjei, and R. Ravaud et al.,
“Misalignment Fault Analysis and Diagnosis in
Switched Reluctance Motor,” International Journal
of Applied Electromagnetics and Mechanics, vol.
, no. 3, pp. 253-265, 2011.
H. Torkaman and E. Afjei, “Magnetostatic Field
Analysis and Diagnosis of Mixed Eccentricity
Fault in Switched Reluctance Motor,”
Electromagnetics, Taylor and Francis, vol. 31, no.
, pp. 368-383, 2011.
H. Torkaman and E. Afjei, “Determining Degrees
of Freedom for Eccentricity Fault in SRM Based
on Nonlinear Static Torque Function,”
COMPEL:The International Journal for
Computation and Mathematics in Electrical and
Electronic Engineering, vol. 30, no. 2, pp. 671-685,
E. Afjei and H. Torkaman, “Investigation of
Electromagnetic Characteristics in External Rotor
SRM under Dynamic Eccentricity Fault,”
International Review of Electrical Engineering,
vol. 6, no. 3, pp. 1257-1263, 2011.
H. Torkaman and E. Afjei, “Hybrid Method of
Obtaining Degrees of Freedom for Radial Airgap
Length in SRM under Normal and Faulty
Conditions Based on Magnetiostatic Model,”
Progress In Electromagnetics Research, PIER, vol.
, pp. 37-54, 2010.
M. N. Anwar, I. Husain, and A. Radun, “A
Comprehensive Design Methodology for Switched
Reluctance Machines,” IEEE Transactions on
Industry Applications, vol. 36, no. 6, pp. 1684-
, 2001.
Magnet CAD package, "User manual," Infolytica
Corporation Ltd., 2007.