Electromagnetic Launch Vehicle Fairing and Acoustic Blanket Model of Received Power using FEKO

Authors

  • Dawn H. Trout Department of Electrical Engineering and Computer Science University of Central Florida, Orlando, FL32816, USA
  • Parveen F. Wahid Department of Electrical Engineering and Computer Science University of Central Florida, Orlando, FL32816, USA
  • ames E. Stanley Kennedy Space Center KSC, FL 32899, USA

Keywords:

Electromagnetic Launch Vehicle Fairing and Acoustic Blanket Model of Received Power using FEKO

Abstract

Evaluating the impact of radio frequency transmission in vehicle fairings is important to electromagnetically sensitive spacecraft. This study employs the multilevel fast multipole method (MLFMM) from a commercial electromagnetic tool, FEKO, to model the fairing electromagnetic environment in the presence of an internal transmitter with improved accuracy over industry applied techniques. This fairing model includes material properties representative of acoustic blanketing commonly used in vehicles. Equivalent surface material models within FEKO were successfully applied to simulate the test case. Finally, a simplified model is presented using the Nicholson Ross Weir derived blanket material properties. These properties are implemented with the coated metal option to reduce the model to one layer within the accuracy of the original three layer simulation.

Downloads

Download data is not yet available.

References

R. Brewer and D. Trout, “Modern Spacecraft,

Antique Specifications,” 2006 IEEE International

Symposium on Electromagnetic Compatibility, pp.

-218, Aug, 2006.

K. Bahadori and Y. Rahmat-Samii, “Estimation of

blockage effects of complex structures on the

performance of the spacecraft reflector antennas

by a hybrid PO/NF-FF Method,” Applied

Computational Electromagnetic Society (ACES)

Journal, March 2007, vol. 22, no. 1, pp. 31-38.

I. Gonzalez, E. Garcia, F. Saez de Adana, and M.

F. Catedra, “MONURBS: A Parallelized Fast

E-10

E-09

E-08

E-07

E-06

E-05

E-04

E-03

E-02

60 2.80 3.00

power (watts)

frequency (GHz)

test data

-Lyr

NRW 1/6

NRW 3 sd

ACES JOURNAL, VOL. 26, NO. 12, DECEMBER 2011

Multipole Multilevel Code for Analyzing

Complex Bodies Modeled by NURBS Surfaces,”

Applied Computational Electromagnetic Society

(ACES) Journal, January 2008, vol. 23, no. 2, pp.

-142.

D. H. Trout, J . E. Stanley,and P. F. Wahid,

“Electromagnetic Launch Vehicle Fairing and

Acoustic Blanket Model of Received Power using

FEKO,” ACES Conference, March 2011.

D. H. Trout, P. F. Wahid, and J. E. Stanley,

“Electromagnetic Cavity Effects from

Transmitters Inside a Launch Vehicle Fairing,”

IEEE EMC Symposium Austin: IEEE, 2009,in

Proc of IEEE EMC Symp. on EMC, Austin, 2009,

pp. 70-74.

M. Kandula, K. Hammad,and P. Schallhorn,

“CFD Validation with LDV Test Data for

Payload/Fairing Internal Flow,” Proc. AIAA,

-4910-9151.

ETS Lindgren Website on double ridged

waveguide horn, EMCO 3115, User Manual.

[Online]. Available:http://www.ets-

lindgren.com/manuals/3115.pdf.

FEKO User’s Manual, July 2008.

U. Jakobus, “Comparison of Different Techniques

for the Treatment of Lossy Dielectric/Magnetic

Bodies within theMethod of Moments

Formulation," AE ̈U International Journal of

Electronics and Communications, 2000, iss. 3,

vol. 54, pp. 163-173.

U. Jakobus, J. Tonder, and M. Schoeman,

“Advanced EMC Modeling by Means of a

Parallel MLFMM andCoupling Network

Theory,” IEEE Internaltion Symposium on EMC,

August 2008, pp. 1-5.

J . E. Stanley, D. H. Trout, S. K. Earles,I. N.

Kostanic, and P F. Wahid, “Analysis of Multi-

Layer Composite Cavity Using FEKO,” Applied

Computational Electromagnetic Society (ACES)

Journal, January 2010, iss. 1, vol. 25, pp. 69-74.

Y. Tsunemitsu, J. Hirokawa, M. Ando, Y. Miura,

Y. Kazama, and N. Goto, “Polarization Isolation

Characteristics Between Two Center-Feed Single-

Layer Waveguide Arrays Arranged Side-by-

Side,” Applied Computational Electromagnetic

Society (ACES) Journal, November 2006, vol. 25,

no. 3, pp. 240-247.

S. D. Keller, “Coplanar Waveguide Slot-coupled

Ka-band Patch Antenna for Integration with

Wafer-scale Beam-steering MEMS Control

Board,” Applied Computational Electromagnetic

Society (ACES) Journal, June 2008, vol. 23, no. 2,

pp. 177-183.

W. C. Chew, J. M. Jin, E. Michielssen, and J.

Song, Fast and Efficient Algorithms in

Computational Electromagnetics, Artech House,

Inc., Norwood, MA, 2001.

Rhode & Schwarz,Measurement of dielectric

material properties. s.l.: Application Center

Asia/Pacific, 2006. RAC0607-0019.

M. D. Deshpande and C. J. Reddy, “Application

of FEM toEstimate Complex Permittivity of

Dielectric Material at Microwave Frequency using

Waveguide Measurements,” NASA, Langley

Research Center, 1995.

D. A. Hill, M. T. Ma, A. R. Ondrejka, B. F.

Riddle, M. L. Crawford, andR. T. Jonk,

“Aperture Excitation of Electrically Large, Lossy

Cavities,” IEEE Trans. Electromagn. Compat.,

vol. 36, no. 3, pp. 169–177, Aug. 1994.

Downloads

Published

2022-05-02

How to Cite

[1]
D. H. . Trout, P. F. . Wahid, and ames E. . Stanley, “Electromagnetic Launch Vehicle Fairing and Acoustic Blanket Model of Received Power using FEKO”, ACES Journal, vol. 26, no. 12, pp. 973–980, May 2022.

Issue

Section

General Submission