Bidirectional Radiated Circularly Polarized Annular-Ring Slot Antenna for Portable RFID Reader

Authors

  • Yi-Fang Lin Institute of Photonics and Communications, National Kaohsiung University of Applied Sciences, Kaohsiung 807, Taiwan
  • Yu-Chang Kao Institute of Photonics and Communications, National Kaohsiung University of Applied Sciences, Kaohsiung 807, Taiwan
  • Hua-Ming Chen Institute of Photonics and Communications, National Kaohsiung University of Applied Sciences, Kaohsiung 807, Taiwan
  • Shan-Cheng Pan Department of Computer and Communication, Shu-Te University, Yen Chau, Kaohsiung 824, Taiwan

Keywords:

Bidirectional Radiated Circularly Polarized Annular-Ring Slot Antenna for Portable RFID Reader

Abstract

A novel single-layer, microstrip-toslotline transition technique for coupling a circularly polarized annular-ring slot antenna in the UHF band is presented. In the proposed design, circular polarization is generated using a proper asymmetry within the annular-ring slot structure and feeding the annular-ring slot using a slotline feed at 135° from the asymmetry. The direct slotline feed is used which is coupled to a 50-? microstrip line on the opposite side of the substrate. The asymmetry in the proposed design is a meandered-slot section and the proposed CP design is achieved by the two orthogonal linear modes of the annular-ring slot. Simulated and measured results indicate that the proposed structure can achieve good CP radiation performances, and an impedance bandwidth and a 3-dB axial-ratio bandwidth obtained for the design are about 17.6% and 3.72%, respectively.

Downloads

Download data is not yet available.

References

K. Finkenzeller, RFID Handbook , 2nd Ed,

New York, Wiley, 2004.

K. L. Wong and Y. F. Lin, "Circularly

polarized microstrip antenna with a tuning

stub," Electron. Lett. , vol. 34, pp. 831-832,

April 30, 1998.

K. L. Wong, W. H. Hsu and C. K. Wu,

"Single-feed circularly polarized microstrip

antenna with a slit," Microwave Opt. Technol.

Lett., vol. 18, pp. 306-308, July 1998.

H. M. Chen and K. L. Wong, "On the circular

polarization operation of annular-ring

microstrip antennas," IEEE Trans. Antennas

Propagat., vol. 47, pp. 1289-1292, Aug. 1999.

J. S. Row, "Dual-frequency circularly

polarized annular-ring microstrip antenna,"

Electron. Lett., vol. 40, no. 3, Feb. 5, 2004.

J. S. Row, "Design of aperture-coupled

annular-ring microstrip antennas for

circular polarization," IEEE Trans.

Antennas Propagat., vol. 53, pp. 1779-

, May 2005.

D. H. Hyun, J. W. Baik, and Y. S. Kim,

“Compact reconfigurable circularly

polarized microstrip antenna with

asymmetric cross slots,” Microw. Opt.

Technol. Lett., vol. 50, no. 8, pp. 2217-2219,

K. L. Wong, C. C. Huang, and W. S. Chen,

"Printed ring slot antenna for circular

polarization," IEEE Trans. Antennas

Propagat., vol. 50, no. 1, pp. 75-77, Jan.

J. Y. Sze, K. L. Wong, and C. C. Huang,

"CPW-fed square slot antenna for

broadband circularly polarizes radiating,"

IEEE Trans. Antennas Propagat., vol. 51,

no. 8, pp. 2141-2144, 2003.

Y. B. Chen, X. F. Liu, Y. C. Jiao and F. S.

Zhang, “CPW-fed broadband circularly

polarized square slot antenna,” Electron.

Lett., vol. 42, no. 19, pp. 1074-1075, Sep.

C. C. Chou, K. H. Lin and H. L. Su,

“Broadband circularly polarized

crosspatch-loaded square slot antenna,”

Electron. Lett., vol. 43, no. 9, pp. 485-486,

T. N. Chang, and J. M. Lin, "A novel

circularly polarized patch antenna with a

serial multislot type of loading," IEEE

Trans. Antennas Propagat., vol. 55, no. 11,

pp. 3345-3348, 2007.

R. Garg, P. Bhartia, A. Bahl, and A. Ittipibon,

Microstrip Antenna Design Handbook , Artech

House, Inc., 2001

Downloads

Published

2022-06-17

How to Cite

[1]
Y.-F. . Lin, Y.-C. . Kao, H.-M. . Chen, and S.-C. . Pan, “Bidirectional Radiated Circularly Polarized Annular-Ring Slot Antenna for Portable RFID Reader”, ACES Journal, vol. 25, no. 3, pp. 182–189, Jun. 2022.

Issue

Section

General Submission