Computationally Efficient Multi-Fidelity Multi-Grid Design Optimization of Microwave Structures

Authors

  • Slawomir Koziel Engineering Optimization & Modeling Center, School of Science and Engineering, Reykjavik University, 101 Reykjavik, Iceland

Keywords:

Computationally Efficient Multi-Fidelity Multi-Grid Design Optimization of Microwave Structures

Abstract

A simple and reliable algorithm for design optimization of microwave structures is introduced. The presented methodology exploits coarse-discretization models of the structure of interest, starting from a very coarse mesh, and gradually increases the discretization density. Each model is optimized using a simple grid-search routine. The optimal design of the current model is used as an initial design for the finer-discretization one. The proposed methodology is computationally efficient as most of the operations are performed on coarse-discretization models. Three examples of microstrip filter designs are given.

Downloads

Download data is not yet available.

References

R.V. Snyder, “Practical aspects of microwave

filter development,” IEEE Microwave

Magazine, vol. 8, no. 2, pp. 42-54, Apr. 2007.

A. Bhargava, “Designing circuits using an

EM/circuit co-simulation technique,” RF

Design, p. 76, Jan. 2005.

S. Shin and S. Kanamaluru, “Diplexer design

using EM and circuit simulation techniques,”

IEEE Microwave Magazine, vol.8, no.2,

pp.77-82, Apr. 2007.

N. V. Queipo, R. T. Haftka, W. Shyy, T.

Goel, R. Vaidynathan, and P.K. Tucker,

“Surrogate-based analysis and optimization,”

Progress in Aerospace Sciences, vol. 41, no.

, pp. 1-28, Jan. 2005.

A. I. J. Forrester and A. J. Keane, “Recent

advances in surrogate-based optimization,”

Prog. in Aerospace Sciences, vol. 45, no. 1-3,

pp. 50-79, Jan.-April, 2009.

J. W. Bandler, Q. S. Cheng, S. A. Dakroury,

A. S. Mohamed, M. H. Bakr, K. Madsen, and

J. Søndergaard, “Space mapping: the state of

the art,” IEEE Trans. Microwave Theory

Tech., vol. 52, no. 1, pp. 337-361, Jan. 2004.

S. Amari, C. LeDrew, and W. Menzel,

“Space-mapping optimization of planar

coupled-resonator microwave filters,” IEEE

Trans. Microwave Theory Tech., vol. 54, no.

, pp. 2153-2159, May 2006.

G. Crevecoeur, L. Dupre, and R. Van de

Walle, “Space mapping optimization of the

magnetic circuit of electrical machines

including local material degradation,” IEEE

Trans. Magn. , vol. 43, no 6, pp. 2609-2611,

June 2007.

35 2.4 2.45

-1.5

-1

-0.5

Frequency [GHz]

|S21

| [dB]

ACES JOURNAL, VOL. 25, NO. 7, JULY 2010

D. Echeverria and P. W. Hemker, “Space

mapping and defect correction,” CMAM The

International Mathematical Journal

Computational Methods in Applied

Mathematics, vol. 5, no. 2, pp. 107-136,

S. Koziel, J. W. Bandler, and K. Madsen, “A

space mapping framework for engineering

optimization: theory and implementation,”

IEEE Trans. Microwave Theory Tech.,

vol. 54, no. 10, pp. 3721-3730, Oct. 2006.

S. Koziel, Q. S. Cheng, and J. W. Bandler,

“Space mapping,” IEEE Microwave

Magazine, vol. 9, no. 6, pp. 105-122, Dec.

X. J. Zhang and D. G. Fang, “Using circuit

model from layout-level synthesis as coarse

model in space mapping and its application in

modelling low-temperature ceramic cofired

radio frequency circuits,” Microwaves,

Antennas & Propagation, IET, vol. 1, no. 4,

pp. 881-886, Aug. 2007.

D. Swanson and G. Macchiarella,

“Microwave filter design by synthesis and

optimization,” IEEE Microwave Magazine,

vol. 8, no. 2, pp. 55-69, Apr. 2007.

J. C. Rautio, “EM-component-based design of

planar circuits,” IEEE Microwave Magazine,

vol. 8, no. 4, pp. 79-90, Aug. 2007.

J. C. Rautio, “Perfectly calibrated internal

ports in EM analysis of planar circuits,” IEEE

MTT-S Int. Microwave Symp. Dig., pp. 1373-

, June 2008.

S. Koziel, J. Meng, J. W. Bandler, M.H. Bakr,

and Q.S. Cheng, “Accelerated microwave

design optimization with tuning space

mapping,” IEEE Trans. Microwave Theory

and Tech., vol. 57, no. 2, pp. 383-394, 2009.

Q. S. Cheng, J. W. Bandler, and S. Koziel,

“Tuning Space Mapping Optimization

Exploiting Embedded Surrogate Elements,”

IEEE MTT-S Int. Microwave Symp. Dig, pp.

-1260, 2009.

S. Koziel, J. W. Bandler, and K. Madsen,

“Quality assessment of coarse models and

surrogates for space mapping optimization,”

Optimization and Engineering, vol. 9, no. 4,

pp. 375-391, 2008.

emTM Version 12.54, Sonnet Software, Inc.,

N. M. Alexandrov and R. M. Lewis, “An

overview of first-order model management

for engineering optimization,” Optimization

Eng., vol. 2, no. 4, pp. 413-430, Dec. 2001.

C. L. Huang, Y. B. Chen, and C. F. Tasi,

“New compact microstrip stacked slotted

resonators bandpass filter with transmission

zeros using high-permittivity ceramics

substrate,” Microwave Opt. Tech. Lett., vol.

, no. 5, pp. 1377-1379, May 2008.

J. W. Bandler, R. M. Biernacki, S. H. Chen,

R. H. Hemmers, and K. Madsen,

“Electromagnetic optimization exploiting

aggressive space mapping,” IEEE Trans.

Microwave Theory Tech., vol. 43, no.12, pp.

-2882, Dec. 1995.

H. M. Lee and C. M. Tsai, “Improved

coupled-microstrip filter design using

effective even-mode and odd-model

characteristic impedances,” IEEE Trans.

Microwave Theory Tech., vol. 53, no. 9, pp.

-2818, Sept. 2005.

FEKO® User’s Manual, Suite 5.3, EM

Software & Systems-S.A. (Pty) Ltd,

http://www.feko.info, 2008

Downloads

Published

2022-06-17

How to Cite

[1]
S. . Koziel, “Computationally Efficient Multi-Fidelity Multi-Grid Design Optimization of Microwave Structures”, ACES Journal, vol. 25, no. 7, pp. 578–586, Jun. 2022.

Issue

Section

General Submission