Introducing a Sub-cell Tensor Technique into a (2, 4) FDTD Method

Authors

  • R.S. Schechter` Authors are in Code 5310 of the Radar Division of the Naval Research Laboratory, Washington DC 20375
  • S.T. Chun Authors are in Code 5310 of the Radar Division of the Naval Research Laboratory, Washington DC 20375
  • M.S. Kluskens Authors are in Code 5310 of the Radar Division of the Naval Research Laboratory, Washington DC 20375
  • M. Kragalott Authors are in Code 5310 of the Radar Division of the Naval Research Laboratory, Washington DC 20375
  • D. A. Zolnick Authors are in Code 5310 of the Radar Division of the Naval Research Laboratory, Washington DC 20375

Keywords:

Introducing a Sub-cell Tensor Technique into a (2, 4) FDTD Method

Abstract

A sub-cell tensor based technique for modeling dielectric interfaces is introduced into a (2,4) FDTD method. For each cell containing an interface, a tensor based method that enforces continuity conditions is used to determine the fields on both sides the sloped interface. These fields are then volumetrically averaged. The approach is used to calculate a corrected field value at each grid point of the large fourth-order stencil. The combined algorithm is computationally homogeneous, unlike most previous algorithms of this type, and thus lends itself to parallel processing. Additionally, the method may be used with other higher-order stencils. The accuracy is tested using the exact Mie series solution for scattering from a dielectric sphere. It is shown that using the (2,4) tensor method results in ~50-70% less error than the (2,4) standard Yee method in the vicinity of a dielectric sphere.

Downloads

Download data is not yet available.

References

J. Nadobny, D. Sullivan, W. Wlodarczyk, P.

Deuflhard, and P. Wust, “A 3-D Tensor

FDTD-Formulation for Treatment of Sloped

Interfaces in Electrically Inhomogeneous

Media,” IEEE Trans. Antenn. Prop. , Vol 51,

No.8, pp. 1760-1770, Aug. 2003.

J. Lee and N. Myung, “Locally Tensor

Conformal FDTD Method for Modeling

Arbitrary Dielectric Surfaces,” Microwave and

Optical Technology Letters, Vol. 23, No. 4, pp.

-249, Nov. 1999.

S. V. Georgakopoulos, C. R. Birtcher, C. A.

Balanis, and R. A. Renaut, “ Higher-Order

Finite-Difference Schemes for Electromagnetic

Radiation, Scattering, and Penetration, Part 2:

Applications,” IEEE Antenna’s and

Propagation Magazine, Vol. 44, No. 2. pp. 92-

, April 2002.

M. F. Hadi and M. Piket-May, “A Modified

FDTD (2,4) Scheme for Modeling Electrically

Large Structure with High-Phase Accuracy,”

IEEE Trans. Antenna. Prop., Vol. 45, No. 2,

pp. 254-264, Feb. 1997.

SCHECHTER, CHUN, KLUSKENS, KRAGALOTT, ZOLNICK: SUB-CELL TENSOR TECHNIQUE INTO FDTD 49

N. V. Kantartzis, T.T, Zygiridis, T. D. Tsiboukis,

“An Unconditionally Stable Higher Order ADIFDTD Technique for the Dispersionless Analysis

of Generalized 3-D EMC Structures,” IEEE

Trans. Magn., Vol. 40, No. 2, pp. 1436-1439,

March 2004.

T. T. Zygiridis and T.D. Tsiboukis, “LowDispersion Algorithms Based on the Higher Order

(2,4) FDTD Method,” IEEE Trans. MTT, Vol. 52,

No. 4, pp. 1321-1327, April 2004.

Downloads

Published

2022-06-18

How to Cite

[1]
R. . Schechter`, S. . Chun, M. . Kluskens, M. . Kragalott, and D. A. . Zolnick, “Introducing a Sub-cell Tensor Technique into a (2, 4) FDTD Method”, ACES Journal, vol. 21, no. 1, pp. 45–50, Jun. 2022.

Issue

Section

General Submission