Modeling the RF Performance of a Small Array

Authors

  • P. R. Foster MAAS, Malvern, UK
  • A. E. Wicks QinetiQ, Malvern, UK

Keywords:

Modeling the RF Performance of a Small Array

Abstract

Large phased arrays can be reasonably accurately modelled in finite element programs, such as HFSS using an infinite array model of the embedded element. This approximation is not applicable to small arrays, where each element is in a different electromagnetic environment. Very small arrays of simple elements (of about 10 elements or less) can be modelled as a complete unit, but slightly larger or more complex arrays require additional techniques to be modelled accurately. The predicted performance of several versions of a small array has been compared using HFSS V9.5. The arrays contained either waveguide or printed dipole elements and, within the limits of available computing resources, solutions were generated for (1) complete array models, (2) half and quarter array models with symmetry planes, and (3) infinite array models.

Downloads

Download data is not yet available.

References

I. Bradi and Z. J. Cendes, “New Directions in HFSS

for Designing Microwave Devices”, Microwave J,

pp. 22 - 36, August 1998.

G. S. Hilton, C. J. Railton, G. J. Ball, M. Dean, A.

L. Hume, “Finite-difference time-domain analysis

of a printed dipole antenna”, 9th International Con-

ference on Antennas and Propagation, Eindhoven,

pp. 1062 - 1065, 1995.

G. S. Hilton, C. J. Railton, G. J. Ball, M. Dean, A.

L. Hume, “Modelling a three-element printed

dipole antenna array using the FDTD technique”,

IEEE AP-S International Symposium and

URSI North American Radio Science Meeting,

Montreal, Canada, pp. 72 - 75, July 13-18, 1997.

A. Beckett, MBDA, Bristol, UK, Private communi-

cation, 2004.

Downloads

Published

2022-06-18

How to Cite

[1]
P. R. . Foster and A. E. . Wicks, “Modeling the RF Performance of a Small Array”, ACES Journal, vol. 21, no. 3, pp. 291–298, Jun. 2022.

Issue

Section

General Submission