Coupling Between Highly Conducting and Permeable Metallic Objects in the EMI Frequency Range

Authors

  • F. Shubitidze Thayer School of Engineering, Dartmouth College, Cummings Hall, HB 8000, Hanover NH, 03755, USA
  • K. O’ Neill Thayer School of Engineering, Dartmouth College, Cummings Hall, HB 8000, Hanover NH, 03755, USA
  • I. Shamatava Thayer School of Engineering, Dartmouth College, Cummings Hall, HB 8000, Hanover NH, 03755, USA
  • K. Sun Thayer School of Engineering, Dartmouth College, Cummings Hall, HB 8000, Hanover NH, 03755, USA

Keywords:

UXO, Low frequency, Electromagnetic induction, Auxiliary sources, Interaction, multiple, scattering

Abstract

Electromagnetic induction (EMI) sensing, from 10's of Hz
up to 100's of kHz, is emerging as one of the most promising remote
sensing technologies for detection and discrimination of buried
metallic objects, particularly unexploded ordinance (UXO). For a
single homogenous target it has been shown that the scattered EMI
signal strongly depends on an object's geometry and its
electromagnetic parameters. Most if not all UXO contain different
kinds of metal. Additionally, UXO sites are often highly
contaminated with metallic clutter. Methods are currently needed to
distinguish dangerous objects, such as UXO, from innocuous clutter.
Recently, analysis of broadband EMI responses from multiple objects
has demonstrated significant interaction between them. The main
goal of the paper is to investigate interaction phenomena between
highly conducting and permeable metallic objects in the EMI
frequency range. Numerical results are compared with experimental
data for canonical geometries (spheres and cylinders). The results
indicate when and how interaction affects the EMI responses and
provides guidance for use of this understanding for future target
discrimination purposes.
.

Downloads

Download data is not yet available.

References

F. Shubitidze, K. O’Neill, S. A. Haider, K. Sun, and

K. D. Paulsen, ”Application of the method of auxiliary sources

to the wideband electromagnetic induction problem ”, IEEE

Transactions on Geoscience and Remote Sensing, Vol: 40 Issue:

, Pages: 928-942, April 2002.

F. Shubitidze, K. O’Neill, K. Sun, and K. D. Paulsen,

“Investigation of broadband electromagnetic induction

scattering by highly conducting, permeable, arbitrarily shaped 3-

D objects” IEEE Transactions on Geoscience and Remote

Sensing, in press.

N. Khadr, B. J. Barrow, T. H. Bell, and H. H. Nelson. “Target

shape classification using electromagnetic induction sensor data

”. UXO Forum on CD, 8 pages, 1998.

F. Shubitidze, K. O’Neill, K. Sun, I. Shamatava, and

K. D. Paulsen “A combined MAS-TSA algorithm for broadband

electromagnetic induction problems. See in this issue of ACES

Proceedings”. The 19th Annual Review of Progress in Applied

Computational Electromagnetics, Pages: 566-572, March 24-28,

F. Shubitidze, K. O’Neill, I. Shamatava, K. Sun, and

K. D. Paulsen “A Hybrid MAS-TSA algorithm for broadband

electromagnetic induction problems. See in this issue of ACES

Proceedings”. Applied Computational Electromagnetics Society

Journal, this issue.

J. R. Wait, “A conducting sphere in a time varying magnetic

field’. Geophysics Volume 16, Pages: 666-672, 1951.

I. Shamatava, K. O’Neill, F. Shubitidze, K. Sun, and C. O. Ao.

“Evaluation of approximate Analytical Solutions for EMI

Scattering from Finite Objects of Different Shapes and

Properties”, IEEE International Geoscience and Remote Sensing

Symposium and 24th Canadian Symposium on Remote Sensing,

Pages: 1550 –1552, July 2002.

Downloads

Published

2022-06-18

How to Cite

[1]
F. . Shubitidze, K. O. Neill, I. . Shamatava, and K. . Sun, “Coupling Between Highly Conducting and Permeable Metallic Objects in the EMI Frequency Range”, ACES Journal, vol. 19, no. 1, pp. 139–148, Jun. 2022.

Issue

Section

General Submission