Simulation Analysis of Electromagnetic Environment Effect and Shielding Effectiveness for VPX Chassis under Plane Wave Radiation
DOI:
https://doi.org/10.13052/2023.ACES.J.381106Keywords:
VPX chassis, shielding effectiveness, electromagnetic environment effect, electromagnetic protectionAbstract
The chassis based on the VPX bus standard structure has been widely applied to the fields of vehicle, missile, radar, etc. In this paper, we analyze the electromagnetic environment effect on VPX chassis via the CST software, and investigate the electromagnetic coupling characteristics of VPX chassis under 20 v/m plane wave radiation according to the RS103 test defined in the MIL-STD-461G standard. By simulation, we analyze the electromagnetic coupling paths of the VPX chassis, find the key positions of the electromagnetic protection such as the air intake, air outlet, trapdoor, and panel gaps, and we propose the electromagnetic protective measures for the weak parts of the VPX chassis. The electromagnetic shielding effectiveness before and after protection design is evaluated. Finally, the simulation results are verified by the experiments. It has guiding significance for the electromagnetic protection design of VPX chassis.
Downloads
References
I. Zheng and G. Wei, “New development of electromagnetic compatibility in the future: Cognitive electromagnetic environment adaptation,” 2021 13th Global Symposium on Millimeter-Waves & Terahertz (GSMM), Nanjing, China, pp. 1-3, 2021.
Y. Wang, H. Sun, Q. Zhao, Y. Mao, and Q. Hou, “Study on capability verification test of electromagnetic pulse protection for aircraft,” 2022 Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC), Beijing, China, pp. 391-439, 2022.
Q. F. Liu, S. Q. Zheng, Y. Zuo, H. Q. Zhang, and J. W. Liu, “Electromagnetic environment effects and protection of complex electronic information systems,” 2020 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO), Hangzhou, China, pp. 1-4, 2020.
J. Jin, H. Xie, J. Hu, and W. Y. Yin, “Characterization of anti-jamming effect on the joint tactical information distribution system (JTIDS) operating in complicated electromagnetic environment,” 2014 International Symposium on Electromagnetic Compatibility, Gothenburg, Sweden, pp. 997-1000, 2014.
Q. Li, W. Cao, J. Ding, J. Fang, J. Sun, and C. Guo, “Research on high-power electromagnetic effect and protective technology of electronic equipments,” 2022 IEEE 9th International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications (MAPE), Chengdu, China, pp. 333-337, 2022.
I. Xiao, Z. Song, J. Wang, and L. Wang, “Simulation analysis of electromagnetic shielding of electronic device chassis,” 2019 12th International Workshop on the Electromagnetic Compatibility of Integrated Circuits (EMC Compo), Hangzhou, China, pp. 91-93, 2019.
Z. Jingchao, Q. Liyan, and C. Liqun, “Development of serial RapidIO high-speed data transmission based on VPX bus,” 2019 14th IEEE International Conference on Electronic Measurement & Instruments (ICEMI), Changsha, China, pp. 65-71, 2019.
N. K. Singh, C. Fouziya, V. Kumar, and T. Venkatamuni, “A programmable, multimode operational 3U-VPX based digital transceiver & processing module for CIT-MKXIIA IFF,” 2023 International Conference for Advancement in Technology (ICONAT), Goa, India, pp. 1-5, 2023.
M. Hua, N. Minxi, T. Anju, and M. Jianghong, “Power and signal integrity analysis of high-speed mixed-signal backplanes based on VPX,” 2018 IEEE Symposium on Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC, SI & PI), Long Beach, CA, USA, pp. 577-581,2018.
N. Wu, D. G. Xie, D. E. Wen, and C. Wang, “Research on simulation and analysis of electromagnetic environment of cabinet in cabin,” 2011 4th IEEE International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications, Beijing, China, pp. 524-527, 2011.
Y. S. Wang, W. Q. Guo, W. Li, and Y. L Bian, “Research on strong electromagnetic protection technology of radar vehicle cockpit,” 2020 6th Global Electromagnetic Compatibility Conference (GEMCCON), XI’AN, China, pp. 1-8, 2020.
Q. Q. Zheng, D. D. Wang, B. Xiong, and H. Y. Yan, “Investigation on ship LEMP protection design and test,” 2018 12th International Symposium on Antennas, Propagation and EM Theory (ISAPE), Hangzhou, China, pp. 1-4, 2018.
Y. Yang, F. Zhu, N. Lu, and Y. Xiao, “Study on the electromagnetic interference of shielded cable in rail weighbridge,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 37, no. 2, pp. 215-221, 2022.
X. Hao, X. Meng, and X. Chen, “Effects mechanism of strong electromagnetic environment to equipment,” 2016 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), Chengdu, China, pp. 1-4, 2016.
Z. Yu and J. Wang, “Electromagnetic interference prediction in transient electromagnetic environment,” 2007 International Symposium on Electromagnetic Compatibility, Qingdao, China, pp. 221-224, 2007.
H. Z. Zhao, G. H. Wei, and X. D. Pan, “Evaluation method of noise electromagnetic radiation interference effect,” IEEE Transactions on Electromagnetic Compatibility, vol. 65, no. 1, pp. 69-78, Feb. 2023.
J. C. Zhou and X. T. Wang, “An efficient method for predicting the shielding effectiveness of an apertured enclosure with an interior enclosure based on electromagnetic topology,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 37, no. 10, pp. 1014-1020, 2022.
Z. Xu, Z. Zhang, B. Wu, H. Wang, X. Kong, and M. Wang, “A study of enclosed magnetic shielding room by simulation,” IEEE Transactions on Applied Superconductivity, vol. 31, no. 8, pp. 1-4, Art no. 2500404, Nov. 2021.
A. Keshtkar, A. Maghoul, A. Kalantarnia, and A. Asad, “Design considerations to affect on shielding effectiveness for conductive enclosure,” IEICE Electronics Express, vol. 813388, no. 13, pp. 1047-1055, 2011.
A. M. Dagamseh, Q. M. Al-Zoubi, and Q. Qananwah, “Modeling of electromagnetic fields for shielding purposes applied in instrumentation systems,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 8, pp. 1075-1082, 2021.
Computer Simulation Technology (CST), http://www.cst.com.
American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3), ANSI C63.14-2014 (Revision of ANSI C63.14-2009) IEEE, 2014.
M. Z. M. Jenu and F. A. Po’ad, “Electric and magnetic shielding effectiveness of metallic enclosures with apertures,” 2006 Asia-Pacific Microwave Conference, Yokohama, Japan, pp. 536-539, 2006.
K. Cui, D. Shi, C. Sun, and X. Liu, “A compact and high-performance shielding enclosure by using metamaterial design,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 11, pp. 1484-1491, 2021.
A. Keshtkar, A. Maghoul, A. Kalantarnia, and H. Hashempour, “Simulation of shielding effectiveness in low frequencies for conductive enclosure,” 2009 Second International Conference on Computer and Electrical Engineering, Dubai, United Arab Emirates, pp. 372-377, 2009.
Z. Dou, J. Zhang, G. Wang, D. He, C. Liu, and T. Wang, “Electromagnetic shielding effectiveness of an absorber-like Carbonyl iron-FeNi double-layer composite,” Journal of Materials Engineering and Performance, vol. 31, no. 1, pp. 643-650, 2022.