Analysis of Infrared Nano-antennas Material Properties for Solar Energy Collection

Authors

  • Wided Amara SysCom Laboratory, ENIT, University of Tunis El Manar, Tunis, Tunisia
  • Taoufik Aguili SysCom Laboratory, ENIT, University of Tunis El Manar, Tunis, Tunisia
  • Abdulsalam Alghamdi 2 Electrical and Computer Engineering Department, Faculty of Engineering King Abdulaziz University, Jeddah, Saudi Arabia 3 King Salman bin Abdulaziz Chair for Energy Research, King Abdulaziz University, Jeddah, Saudi Arabia
  • Donia Oueslati Electrical and Computer Engineering Department, Faculty of Engineering King Abdulaziz University, Jeddah, Saudi Arabia
  • Nermeen Eltresy 2 Electrical and Computer Engineering Department, Faculty of Engineering King Abdulaziz University, Jeddah, Saudi Arabia,4 Microstrip Department, Electronics Research Institute, Giza, Egypt
  • Muntasir Sheikh Electrical and Computer Engineering Department, Faculty of Engineering King Abdulaziz University, Jeddah, Saudi Arabia
  • Hatem Rmili 1 SysCom Laboratory, ENIT, University of Tunis El Manar, Tunis, Tunisia 2 Electrical and Computer Engineering Department, Faculty of Engineering King Abdulaziz University, Jeddah, Saudi Arabia

Keywords:

Electric field, energy harvesting, infrared, nano-antenna

Abstract

This work presents the effect of material properties on three infrared nano antennas that are rectangular, bowtie, and elliptical-shaped designed to collect a maximum field in the gap between the two dipole arms over a frequency band of 28-29THz. The dipole shapes are comprised of conducting dipoles printed on a dielectric substrate. The bowtie is designed to be curved with an exponential shape, and itis found to collect a higher value of the electric field in the gap than do the other two shapes. The above antennas are investigated with different materials for the dipoles and the substrate to study the effect of material variation on the electric field collected in the dipole gap. Three different types of conducting materials, namely, gold, chromium, and titanium are used. It is found that the collected gap field intensity is directly proportional to the conductivity of the dipole material. The effect of three different types of substrates; quartz (GaAs), silicon, and SiO2 on the collected gap field is also investigated.

Downloads

Download data is not yet available.

References

P. Bosshard, W. Hermann, E. Hung, R. Hunt, and A. Simon, “An assessment of solar energy conversion technologies and research opportunities,” GCEP Energy Assessment Analysis, 2006.

G. Moddel and S. Grover, Rectenna Solar Cells. Springer, New York, 2013.

A. M. A. Sabaawi, C. Tsimenidis, and B. S. Sharif, “Infra-red nano-antennas for solar energy collection,” Loughborough, UK, 14-15 Nov. 2011.

A. M. A. Sabaawi, C. Tsimenidis, and B. S. Sharif, “Infra-red spiral nano-antennas,” Loughborough, UK, 12-13 Nov. 2012.

G. Jayaswal, A. Belkadi, A. Meredov, B. Pelz, G. Moddel, and A. Shamim, “Optical rectification through an Al2O3 based MIM passive rectenna at 28.3 THz,” Materials Today Energy, 7, pp. 1-9, 2018.

A. Haque, A. W. Reza, N. Kumar, and H. Ramiah, “Slotting effect in designing circular edge bow-tie nano antenna for energy harvesting,” 2015 IEEE Conference on Open System (ICOS), Melaka, Malaysia, Aug. 2015.

M. N. Gadalla, M. Abdel-Rahman, and A. Shamim, “Design, optimization and fabrication of a 28.3 THz nanorectenna for infrared detection and rectification,” Scientific Reports, 4, 2014.

A. M. A. Sabaawi, C. C. Tsimenidis, and B. S. Sharif, “Planar bowtie nanoarray for THz energy detection,” IEEE Transactions on Terahertz Science and Technology.

I. E. Hashem, N. H. Rafat, and E. A. Soliman, “Dipole nantennas terminated by traveling wave rectifiers for ambient thermal energy harvesting,” IEEE Transactions on Nanotechnology, vol. 13, no. 4, July 2014.

N. A. Eltresy, H. A. Malha, S. H. Zainud-Deen, and K. H. Awadalla, “Dual-polarized nanoantenna solar energy collector,” 33rd National Radio Science Conference (NRSC 2016), Aswan, Egypt, Feb. 2016.

W. Amara, D. Oueslati, H. Rmili, A. Alghamdi, and T. Aguili, “Numerical analysis of a modifieddipole optical antenna for solar energy harvesting,” The 2018 International Conference on Innovative Trends in Energy (ITE’18), Hammamet-Tunisia, May 10-12, 2018.

W. Amara, D. Oueslati, H. Rmili, A. Alghamdi, and T. Aguili, “Ultra-wideband elliptical-dipole optical antenna for solar energy harvesting,” The 2018 International Conference on Sensors, Systems, Signals and Advanced Technologies, (SSS’18), Hammamet-Tunisia, May 10-12, 2018.

W. Amara, N. Elresty, A. Yahyaoui, H. Rmili, T. Aguili, and J. M. Floch, “Design of ultra-wideband nano-antennas for solar energy harvesting,” The Loughborough Antennas and Propagation Conference, LAPC, Nov. 2017.

A. Vial, T. Laroche, and M. Roussey, “Crystalline structure’s influence on the near-field optical properties of single plasmonic nanowires,” Applied Physics Letters, 91, 123101, 2007.

J. Schuller, R. Zia, and M. Brongersma, “Nearfield characterization of guided polariton propagation and cutoff in surface plasmon waveguides,” Physical Review B, 74, pp. 1-12, 2006.

R. W. Alexander, Jr. and C. A. Ward, “Optical properties of the metals Al,Co, Cu, Au, Fe, Pb, Ni, Pd, Pt, Ag, Ti, and Win the infrared and far infrared,” Appl. Opt., vol. 22, p. 1099, 1983.

P. B. Johnson R. W. Christy, “Optical constants of the noble metals,” Phys. Rev. B, 6:4370-9, 1972.

CST Microwave Studio, ver. 2012, Computer Simulation Technology, Framingham, MA, 2012.

P. Biagioni, J.-S. Huang, and B. Hecht, “Nanoantennas for visible and infrared radiation,” Rep. Prog. Phys., 75, 024402 (40pp), 2012. doi:10.1088/ 0034-4885/75/2/024402

https://refractiveindex.info/

W. Amara, D. Oueslati, N. Elestry, A. Alghamdi, K. Sedraoui, T. Aguili, and H. Rmili, “Parametric study of modified-dipole nano-antennas printed on thick substrates for infrared energy harvesting,” Int. J Numer Model, 2019. e2704. https://doi.org/ 10.1002/jnm. 2704.

Downloads

Published

2020-03-01

How to Cite

[1]
Wided Amara, “Analysis of Infrared Nano-antennas Material Properties for Solar Energy Collection”, ACES Journal, vol. 35, no. 3, pp. 258–266, Mar. 2020.

Issue

Section

General Submission