Coupling of 3D Analytical Calculation and PSO for the Identification of Magnet Parameters used in Magnetic Separation

Authors

  • M. Ouili Laboratoire d’électrotechnique de Constantine (LEC) Université des frères Mentouri Constantine 1, Route Ain Elbey, 25000 Constantine, Algérie
  • R. Mehasni Laboratoire d’électrotechnique de Constantine (LEC) Université des frères Mentouri Constantine 1, Route Ain Elbey, 25000 Constantine, Algérie
  • M. Feliachi Laboratoire IREENA Université de Nantes, CRTT, BP 406, Boulevard de l'université, 4460, Saint Nazaire cedex, France
  • H. Allag Laboratoire de génie électrique de Jijel (L2EI) Université de Jijel, 18000 Jijel, Algérie
  • H. R. E. H. Bouchekara Department of Electrical Engineering, Hafr Al-Batin University, Hafr Al-Batin 31991, Saudi Arabia
  • G. Berthiau Laboratoire IREENA Université de Nantes, CRTT, BP 406, Boulevard de l'université, 4460, Saint Nazaire cedex, France
  • M. E. H. Latreche Laboratoire d’électrotechnique de Constantine (LEC) Université des frères Mentouri Constantine 1, Route Ain Elbey, 25000 Constantine, Algérie

Keywords:

3D analytical solution, inverse problem, magnetic separation, parameters identification, Particle Swarm Optimization, permanent magnet

Abstract

In this work, the identification of the residual magnetic flux density of NdFeB permanent magnet, used in a drum magnetic separator, is performed. This identification problem has been formulated as an inverse optimization problem and solved using the Particle Swarm Optimization (PSO) method. For fast calculations, flux densities are computed using a 3D analytical method and the obtained results are compared with measurements.

Downloads

Download data is not yet available.

References

X. Zheng, N. Guo, R. Cui, et al., “Magnetic field simulation and experimental tests of special crosssectional shape matrices for high gradient magnetic separation,” IEEE Transactions on Magnetics, vol. 53, no 3, pp. 1-10, 2017.

R. Mehasni, M. E. H. Latreche, and M. Feliachi, “Effect of the magnetic dipole-dipole interaction on the capture efficiency in open gradient magnetic separation,” IEEE Trans on Magnetics, vol. 43, no. 8, Aug. 2007.

A. Belounis, R. Mehasni, M. Ouili, and M. E. H. Latreche, “Optimization of the capture element for an OGMS based on the 3d computation of the magnetic particle behavior,” International Journal of Electromagnetic and Mechanics, vol. 48, no. 4, pp. 387-397, 2015.

F. Mishima, Y. Akiyama, and S. Nishijima, “Fundamental study on magnetic separator using oxygen dissolved perfluorocarbon,” IEEE Transactions on Applied Superconductivity, vol. 24, no. 3, pp. 1-5, 2014.

D. M. Reed, S. Jingand, and H. F. Hofmann, “Simultaneous identification and adaptive torque control of permanent magnet synchronous machines,” IEEE Transactions on Control Systems Technology, vol. 25, no. 4, pp. 1372-1383, 2017.

S. Song, C. Hu, and M. Q. Meng, “Multiple objects positioning and identification method based on magnetic localization system,” IEEE Transactions on Magnetics, vol. 52, Oct. 2016.

J. De Bisschop, A. Abdallah, P. Sergeant, and L. Dupré, “Identification of demagnetization faults in axial flux permanent magnet synchronous machines using an inverse problem coupled with an analytical model,” IEEE Transactions on Magnetics, vol. 50, no. 11, Nov. 2014.

S. Zhe, H. Ying, Z. Jinging, S. Zhengang, Z. Lei, and Y. Suyuan, “Identification of active magnetic bearing system with a flexible rotor,” Elsivier, Mechanical Systems And Signal Processing, vol. 49, no. 2, pp. 302-316, Dec. 2014.

H. Boudjefdjouf, H. R. H. Bouchekara, F. de Paulis, et al., “Wire fault diagnosis based on timedomain reflectometry and backtracking search optimization algorithm,” Applied Computational Electromagnetics Society Journal, vol. 31, no. 4, 2016.

J. Pzolghadr, Y. Cai, and N. Ojaroudi, “UWB slot antenna with band-notched property with time domain modelling based on genetic algorithm optimization,” Applied Computational Electromagnetics Society Journal, vol. 31, no. 8, 2016.

R. Carlos, K. Tine, and G. Alejandro, “Identification of a proton-exchange membrane fuel cell’s model parameters by means of an evolution strategy,” IEEE Transactions on Industrial Informatics, vol. 11, no. 2, July 2014.

S.-Y. Kuo and Y.-H. Chou, “Entanglementenhanced quantum-inspired Tabu search algorithm for function optimization,” IEEE Access, vol. 5, pp. 13236-13252, 2017.

F. Campelo, F. G. Guimarães, H. Igarashi, J. A. Ramírez, and S. Noguchi, “A modified immune network algorithm for multimodal electromagnetic problems,” IEEE Transactions on Magnetics, vol. 42, no. 4, pp. 1111-1114, Apr. 2006.

F.-P. Xiang, E.-P. Li, X.-C. Wei, and J.-M. Jin, “A particle swarm optimization-based approach for predicting maximum radiated emission from PCBS with dominant radiators,” IEEE Trans on Electromagnetic Compatibility, vol. 57, pp. 1197-1205, 2015.

L. D. S. Coelho, L. D. Afonso, and P. Alotto, “A modified imperialist competitive algorithm for optimization in electromagnetics,” IEEE Transactions on Magnetics, vol. 48, no. 2, pp. 579-582, 2012.

H. R. E. H. Bouchekara, “Most valuable player algorithm: A novel optimization algorithm inspired from sport,” Operational Research, pp. 1-57, May 10, 2017.

H. R. H. Bouchekara, M. Nahas, and H. M. Kaouach, “Optimal design of electromagnetic devices using the league championship algorithm,” Applied Computational Electromagnetics Society Journal, vol. 32, no. 6, 2017.

A. Azzouza, H. Allag, J.-P. Yonnet, and P. Tixador, “3-D new calculation principle of levitation force between permanent magnet and hard type-II superconductor using integral approach,” IEEE Trans. Magn., vol. 53, no. 11, 2017.

H. Allag, J.-P. Yonnet, H. R. H. Bouchekara, et al., “Coulombian model for 3d analytical calculation of the torque exerted on cuboidal permanent magnets with arbitrary oriented polarizations,” Applied Computational Electromagnetics Society Journal, vol. 30, no. 4, 2015.

M. Hadef, M. R. Mekideche, and H. Allag, “Relative magnetic permeability identification of the permanent magnets of a synchronous motor using inverse problem,” International Review of Electrical Engineering (IREE), vol. 2, no. 2, pp. 103-109, 2007.

A. Gilles and J.-P. Yonnet, “3D analytical calculation of the forces exerted between two cuboidal magnets,” IEEE Trans on Magnetics, vol. mag-20, no. 5, Sep. 1984.

H. Allag, J.-P. Yonnet, and M. E. H. Latreche, “3D analytical calculation of forces between linear Halbach-type permanent magnet arrays,” 8th International Symposium on. IEEE, pp. 1-6, 2009.

J.-H. Lee, J.-W. Kim, J.-Y. Song, et al., “Distancebased intelligent particle swarm optimization for optimal design of permanent magnet synchronous machine,” IEEE Trans on Magnetics, vol. 53, no. 6, 2017.

C. Zhang, Z. Chen, Q. Mei, et al., “Application of particle swarm optimization combined with response surface methodology to transverse flux permanent magnet motor optimization,” IEEE Trans on Magnetics, vol. 53, no. 12, pp. 1-7, 2017.

J. Brownlee, “Clever algorithms: nature-inspired programming recipes,” Jason Brownlee, 2011.

B. Alatas, “Sports inspired computational intelligence algorithms for global optimization,” Artificial Intelligence. Rev., 2017.

H. R. E. Bouchekara, A. Orlandi, M. Al-Qdah, and F. de Paulis, “Most valuable player algorithm for circular antenna arrays optimization to maximum sidelobe levels reduction,” IEEE Transactions on Electromagnetic Compatibility, vol. 60, no. 6, 2018.

H. Zhang, B. Kouet, and L. Li, “Analytical calculation of the 3D magnetic field created by non-periodic permanent magnet arrays,” in Electrical Machines and Systems (ICEMS) 2011 International Conference on. IEEE, pp. 1-4, 2011.

F. J. Maarten, J. J. H. Paulides, and E. Ilhan, “Relative permeability in a 3d analytical surface charge model of permanent magnets,” IEEE Trans. on Magnetics, vol. 49, no. 5, May 2013.

Downloads

Published

2019-10-01

How to Cite

[1]
M. Ouili, “Coupling of 3D Analytical Calculation and PSO for the Identification of Magnet Parameters used in Magnetic Separation”, ACES Journal, vol. 34, no. 10, pp. 1607–1615, Oct. 2019.

Issue

Section

Articles