Design of Ultra-wideband and Transparent Absorber based on Resistive Films

Authors

  • Xinru Lu School of Electronic and Information Engineering Xi’an Jiaotong University, Xi’an, 710000, China
  • Juan Chen The Shenzhen Research School Xi’an Jiaotong University, Shenzhen, 518000, China
  • Youqi Huang China Building Materials Academy Co., Ltd China Building Materials Academy Co., Ltd, Beijing, 100024, China
  • Zixian Wu School of Electronic and Information Engineering Xi’an Jiaotong University, Xi’an, 710000, China
  • Anxue Zhang School of Electronic and Information Engineering Xi’an Jiaotong University, Xi’an, 710000, China

Keywords:

Absorber, broadband, RCS reduction, resistive film, transparent

Abstract

Researching and developing of ultra-wideband capability and high light transmittance have been hot issues in the field of new artificial electromagnetic stealth material. In this paper, a novel transparent metamaterial absorber, made of resistive films and glass, has been presented. The simulation results show that, under the incidence of plane wave, the absorber realizes high absorption during frequency range from 3.5 GHz to 18.5 GHz while keeping insensitive to polarization. A prototype has been fabricated and tested, and the measurement results are in good consistent with simulation. Along with its high transmittance and superior absorption, we expect that the absorber has great potential applications in RCS (Radar Cross Section) reduction and electromagnetic shielding.

Downloads

Download data is not yet available.

References

N. I. Landy, S. Sajuyigbe, J. Mock, D. R. Smith, and W. J. Padilla, “Perfect metamaterial absorber,” Physical Rev. Lett., vol. 100, no. 20, p. 207402, 2008.

L. Yuan, X. Shen, S. Cui, and L. Fan, “Progress and prospect of transparent and electromagnetic shielding material,” NA Mater. Science and Eng., vol. 30, no. 2, pp. 82-84, 2007.

Y. Peng, V. B. Lucas, H. Yongjun, and W. Jiang, “Broadband metamaterial absorbers,” Adv. Opt. Mater., p. 1800995, 2018.

M. B. Ghandehari, N. Feiz, and H. Bolandpour, “Design a multiband perfect metamaterial absorber based on hexagonal shapes,” ACES Conference, 2015.

Y. Ozturk and A. E. Yilmaz, “Multiband and perfect absorber with circular fishnet metamaterial and its variations,” ACES Journal, vol. 31, no. 12, 2016.

D. Wen, H. Yang, Q. Ye, and M. Lin, “Broadband metamaterial absorber based on a multi-layer structure,” Phys. Scr., vol. 88, p. 015402, 2016.

J. Chen, J. Li, and Q. Liu, “Designing graphenebased absorber by using HIE-FDTD method,” IEEE T. Antenna Propag., vol. 65, no. 4, pp. 1896-1902, 2017.

J. Chen, J. Li, and Q. Liu, “Analyzing graphenebased absorber by using WCS-FDTD method,” IEEE T. Micorw. Theory, vol. 65, no. 10, pp. 3689- 3696, 2017.

N. Xu, J. Chen, J. Wang, X. Qin, and J. Shi, “Dispersion HIE-FDTD method for simulating graphene-based absorber,” IET Microw. Antenna P., vol. 11, no. 1, pp. 92-97, 2017.

N. Xu, J. Chen, J. Wang, and X. Qin, “A dispersive WCS-FDTD method for simulating graphene-based absorber,” J. Electromag. Wave, vol. 31, no. 18, pp. 2005-2015, 2017.

V. M. Petrov and V. V. Gagulin, “Microwave absorbing materials,” Inorg. Mater., vol. 37, no. 2, pp. 93-98, 2001.

Y. Qiu, Y. Chen, C. Zu, and Y. Jin, “Research progress of ITO thin films,” Advanced Ceramics, vol. 37, pp. 304-324, 2016.

Y. Da, X. Wei, and Y. Xu, “Experimental demonstration of transparent microwave absorber based on graphene,” Proceedings of 2016 IEEE MTT-S International Wireless Symposium (IWS), Shanghai, China, Mar. 2016.

B. Zhou, D. Wang, W. Jia, and Y. Zhao, “Design and properties of optically transparent and dual band microwave absorbing metamaterial,” J. of Microwaves, vol. 32, pp. 46-50, 2016.

T. Jang, H. Youn, Y. Shin, and L. J. Guo, “Transparent and flexible polarization-independent microwave broadband absorber,” ACS Photonics, vol. 1, pp. 279-284, 2014.

X. Huang, Q. Fu, and F. Zhang, “Research advances of metasurface,” Aero Weapon, vol. 1, pp. 28-34, 2016.

Z. Zhou, D. Huang, X. Liu, W. Mou, and F. Kang, “Application developments of metamaterial in wideband microwave absorbing materials,” Material Engineering, vol. 5, pp. 91-96, 2014.

F. Costa and A. Monorchio, “Analysis and design of ultra-thin electromagnetic absorbers comprising resistively loaded high impedance surfaces,” IEEE T. Antenna Propag., vol. 58, 2010.

Y. Shen, Z. Pei, and S. Qu, “Design and fabrication of a wideband frequency selective surface absorber loaded with a high dielectric thin layer,” Journal of Functional Material, vol. 19, no. 46, pp. 19075- 19079, 2015.

D. Smith, D. Vier, T. Koschny, and C. M. Soukoulis, “Electromagnetic parameter retrieval from inhomogeneous metamaterials,” Phys. Rev. Lett., vol. 71, p. 036617, 2005.

Downloads

Published

2019-05-01

How to Cite

[1]
Xinru Lu, Juan Chen, Youqi Huang, Zixian Wu, and Anxue Zhang, “Design of Ultra-wideband and Transparent Absorber based on Resistive Films”, ACES Journal, vol. 34, no. 05, pp. 765–770, May 2019.

Issue

Section

Articles