Patch Antenna with Triangular Slitted Corners

Authors

  • Anıl Elakaş Department of Electrical & Electronics Engineering Istanbul Commerce University Istanbul, Turkey
  • Gürhan Ali Irmak Department of Electrical & Electronics Engineering Istanbul Commerce University Istanbul, Turkey
  • Mert Şencan Department of Electrical & Electronics Engineering Istanbul Commerce University Istanbul, Turkey
  • Ş. Taha Imeci Department of Electrical & Electronics Engineering Int. University of Sarajevo, Bosnia and Herzegovina
  • Tahsin Durak Department of Technology, NSU, Norfolk, VA

Keywords:

Asymmetric triangular slit, gain, microstrip patch antenna

Abstract

In this paper, a microstrip patch antenna with triangular slits was designed, simulated, fabricated and tested. The proposed patch antenna, with operating frequency of 9.5 GHz, is targeted. Simulation is carried out using Sonnet Suites. Antenna has 9.68 dB gain at 9.5 GHz with corresponding reflection coefficient of -19 dB. Proposed antenna introduces size reduction for patch antennas. The measurements of the fabricated patch antenna well corroborate the simulation results.

Downloads

Download data is not yet available.

References

C. A. Balanis, Antenna Theory Analysis and Design. 2nd edition, John Wiley & Sons, Inc., 1997.

M. Gokten, F. Altunkilic, and H. Son, “Compact Circularly Polarized Patch Antenna,” Department of 26th Annual Review of Progress in Applied Computational Electromagnetics April 26-29, 2010 - Tampere, Finland ©2010 ACES Electrical Engineering and Computer Science, Syracuse University, NY, Spring 2002.

T. Imeci and A. Saral, “Corners Truncated Microstrip Patch Antenna,” Halic University, Department of Electronics and Communication Engineering, ACES, Tampere, Finland, 2010.

R. E. Munson, “Conformal microstrip antennas and microstrip phased arrays,” IEEE Trans. Antennas Propagation, vol. AP-22, pp. 74-78, Jan. 1974.

R. K. Sharan, S. K. Sharma, A. Gupta, and R. K. Chaoudhary, “An edge tapered rectangular patch antenna with parasitic stubs and slot for wideband applications,” Wirel. Pers. Commun., 86, pp. 1213-1220, 2016.

O. Mahmoodian, “Enhancing microstrip patch antenna performance by using high impedance surfaces (HIS),” Bull. Env. Pharmacol. Life Sci., 5(6), pp. 11-14, 2016.

A. Bendaoudi and Z. Mahdjoub, “Comparative study of patch antenna loaded with slot split-ring resonators on different substrate materials,” Photon Network Communication, vol. 35, pp. 195-203, 2018.

D. M. Pozar, “Microstrip antenna coupled to microstripline,” Electron Lett., vol. 21, no. 2, pp. 49-50, Jan. 1995.

C. G. Kakoyiannis, G. Stamatiou, and P. Constantinou, “Small square meander-line antennas with reduced ground plane size for multimedia WSN nodes,” Antennas and Propagation, 2009, EuCAP 2009, 3rd European Conference on, IEEE, 2009.

P. M. Shanmugam and M. A. M. Mohamed, “A CPW Fed Star Shaped Patch Antenna for WSN Applications,” Second International Conference on Electrical and Communication Technology, 2016, pp. 182-187.

M. T. Islam, M. Cho, M. Samsuzzaman, and S. Kibria, “Compact antenna for small satellite applications,” IEEE Antennas and Propagation Magazine, vol. 57, no. 2, pp. 30-36, Apr. 2015.

Sonnet Suites, ver. 17.52, www.sonnetsoftware.com

Downloads

Published

2019-02-01

How to Cite

[1]
Anıl Elakaş, Gürhan Ali Irmak, Mert Şencan, Ş. Taha Imeci, and Tahsin Durak, “Patch Antenna with Triangular Slitted Corners”, ACES Journal, vol. 34, no. 02, pp. 293–296, Feb. 2019.

Issue

Section

General Submission