A Low-Profile Miniaturized Frequency Selective Surface with Insensitive Polarization

Authors

  • Meiyu Wang College of Information and Communication Engineering Harbin Engineering University, Harbin, 150001, China
  • Lei Zhao Center for Computational Science and Engineering, School of Mathematics and Statistics Jiangsu Normal University, Xuzhou, China
  • Jun Wang Center for Computational Science and Engineering, School of Mathematics and Statistics Jiangsu Normal University, Xuzhou, China
  • Xinhua Liang School of Physics Electronic Engineering, Jiangsu Normal University, Xuzhou, China
  • Shengjun Zhang National Key Laboratory of Science and Technology on Test Physics & Numerical Mathematical, Beijing, China
  • Yingsong Li College of Information and Communication Engineering Harbin Engineering University, Harbin, 150001, China
  • Wenhua Yu Center for Computational Science and Engineering, School of Mathematics and Statistics Jiangsu Normal University, Xuzhou, China

Keywords:

Angular stability, frequency selective surface, miniaturization, wideband

Abstract

In this letter, a low-profile miniaturized broadband bandpass frequency selective surface (FSS) is proposed. The proposed structure consists of a convoluted dipole metal layer and its complementary pattern, which are separated by a dielectric substrate with a thickness of 0.003lambda0, where lambda0 is the resonant wavelength in free space. The cell size of the proposed FSS is only 0.03lambda0 × 0.03lambda0. Furthermore, 3 dB bandwidth of the proposed FSS is approximately 50% for the normal incidence. Low profile and miniaturization of the structure element contribute to the great stability of frequency response under the incident waves with different incident angles and polarizations. To better understand the operational principle of the proposed FSS, the equivalent circuit model is presented. The proposed FSS prototype was fabricated and measured to validate the design.

Downloads

Download data is not yet available.

References

B. A. Munk, Frequency Selective Surfaces: Theory and Design. New York, NY, USA: Wiley, 2000.

S. Yang, J. Zhang, Y. Pang, M. Feng, and S. Qu, “Water-based metamaterial absorber for broadband electromagnetic wave absorption,” International Applied Computational Electromagnetics Society Symposium, pp. 1-2, 2017.

M. A. A. Abessolo, Y. Diallo, A. Jaoujal, A. El Moussaoui, and N. Aknin, “Stop-band filter using a new metamaterial complementary split triangle resonators (CSTRs),” Applied Computational Electromagnetics Society Journal, vol. 28, no. 4, pp. 353-358, 2013.

K. Sarabandi and N. Behdad, “A frequency selective surface with miniaturized elements,” IEEE Trans. Antennas Propag., vol. 55, no. 5, pp. 1239-1245, 2007.

F. Huang, J. C. Batchelor, and E. A. Parker, “Interwoven convoluted element frequency selective services with wide bandwidths,” Electron. Lett., vol. 42, no. 14, pp. 788-790, 2006.

Y. R. Shi, W. Zhuang, W. C. Tang, C. Wang, and S. Liu, “Modeling and analysis of miniaturized frequency-selective surface based on 2.5-dimensional closed loop with additional transmission pole,” IEEE Trans. Antennas Propag., vol. 64, no. 1, pp. 346-351, 2016.

H. L. Liu, K. L. Ford, and R. J. Langley, “Design methodology for a miniaturized frequency selective surface using lumped reactive components,” IEEE Trans. Antennas Propag., vol. 57, no. 9, pp. 2732- 2738, 2009.

H. Li, C. Yang, Q. Cao, and Y. Wang, “An ultrathin bandpass frequency selective surface with miniaturized element,” IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 341-344, 2016.

P. C. Zhao, Z. Y. Zong, W. Wu, and D. G. Fang, “A convoluted structure for miniaturized frequency selective surface and its equivalent circuit for optimization design,” IEEE Trans. Antennas Propag., vol. 64, no. 7, pp. 2963-2970, 2016.

M. N. Hussein, J. F. Zhou, Y. Huang, M. Kod, and A. P. Sohrab, “Frequency selective surface structure miniaturization using interconnected array elements on orthogonal layers,” IEEE Trans. Antennas Propag., vol. 65, no. 5, pp. 2376-2385, 2017.

A. B. Varuna, S. Ghosh, and K. V. Srivastava, “A miniaturized-element bandpass frequency selective surface using meander line geometry,” Microw. Opt. Techn. Lett., vol. 59, no. 10, pp. 2484-2489, 2017.

G. Yang, T. Zhang, W. Li, and Q. Wu, “A novel stable miniaturized frequency selective surface,” IEEE Antennas Wireless Propag. Lett., vol. 9, pp. 1018-1021, 2010.

F. Costa, A. Monorchio, and G. Manara, “Efficient analysis of frequency selective surfaces by a simple equivalent circuit approach,” IEEE Antennas Propag. Mag., vol. 54, no. 4, pp. 35-48, 2012.

D. S. Lockyer, J. C. Vardaxoglou, and R. A. Simpkin, “Complementary frequency selective surfaces,” IEE Proc. Microw., Antennas Propag., vol. 147, no. 6, pp. 501-507, 2000.

M. Al-Joumayly and N. Behdad, “A new technique for design of low-profile second-order bandpass frequency selective surfaces,” IEEE Trans. Antennas Propag., vol. 57, no. 2, pp. 452-459, 2009.

Downloads

Published

2021-07-22

How to Cite

[1]
Meiyu Wang, “A Low-Profile Miniaturized Frequency Selective Surface with Insensitive Polarization”, ACES Journal, vol. 33, no. 09, pp. 1003–1008, Jul. 2021.

Issue

Section

Articles