Optimization and Design of Multi-ring Pole Pieces for Small-sized Permanent Magnetic Resonance Imaging Magnet

Authors

  • Yi-Yuan Cheng Department of Mechanical and Electrical Engineering Nanyang Normal University, Nanyang, 473061, China
  • Tao Hai Department of Mechanical and Electrical Engineering Nanyang Normal University, Nanyang, 473061, China
  • Yang-Bing Zheng Department of Mechanical and Electrical Engineering Nanyang Normal University, Nanyang, 473061, China
  • Bao-Lei Li Department of Physics and Electrical Engineering Nanyang Normal University, Nanyang, 473061, China
  • Ling Xia Department of Biomedical Engineering Zhejiang University, Hangzhou, 310027, China

Keywords:

Multi-ring pole pieces, nonlinear optimization, particle swarm optimization, permanent MRI magnet

Abstract

In magnetic resonance imaging (MRI) system, the main magnet creates a static magnetic field, which largely determines the final imaging quality. Pole pieces of pure-iron are commonly used to improve the field homogeneity in the imaging region. In this work, we attempt to design a novel configuration of multi-ring pole pieces for a small animal MRI system. Based on the model of a small H-type permanent magnet, the magnetic field is calculated using the finite element method, which considers the nonlinearity of the ferromagnetic materials. The pole piece was designed with the particle swarm optimization (PSO) algorithm. The results show that, the optimal multi-ring pole pieces can effectively reduce the uniformity about 10-20 ppm (10-6), with a better performance compared with the flat and traditional onering pole piece configuration.

Downloads

Download data is not yet available.

References

Y. Zhang, D. Xie, B. Bai, H. S. Yoon, and C. S. Koh, “A novel optimal design method of passive shimming for permanent MRI magnet,” IEEE Trans. Magnetics, vol. 44, pp. 1058-1061, 2008.

H. Sanchez Lopez, F. Liu, E. Weber, and S. Crozier, “Passive shim design and a shimming approach for biplanar permanent magnetic resonance imaging magnets,” IEEE Trans. Magnetics, vol. 44, pp. 394-402, 2008.

J. Goebel, A. Pinzano, D. Grenier, A. Perrier, C. Henrionnet, L. Galois, P. Gillet, and O. Beuf, “New trends in MRI of cartilage: Advances and limitations in small animal studies,” Bio-medical Materials and Engineering, vol. 20, pp. 189-194, 2010.

A. Schmid, J. Schmitz, J. Mannheim, F. Maier, K. Fuchs, H. Wehrl, and B. Pichler, “Feasibility of sequential PET/MRI using a state-of-the-art small animal PET and a 1 T benchtop MRI,” Molecular Imaging and Biology, pp. 1-11, 2013.

T. Miyamoto, H. Sakurai, H. Takabayashi, and M. Aoki, “A development of a permanent magnet assembly for MRI devices using Nd-Fe-B material,” IEEE Trans. Magnetics, vol. 25, pp. 3907-3909, 1989.

A. Momy and J. Taquin, “Low-leakage wide-access magnet for MRI,” IEEE Trans. Magnetics, vol. 33, pp. 4572-4574, 1997.

C. Juchem, B. Muller-Bierl, F. Schick, N. Logothetis, and J. Pfeuffer, “Combined passive and active shimming for in vivo MR spectroscopy at high magnetic fields,” Journal of Magnetic Resonance, vol. 183, pp. 278-289, 2006.

G. Sinha, R. Sundararaman, and G. Singh, “Design concepts of optimized MRI magnet,” IEEE Trans. Magnetics, vol. 44, pp. 2351-2360, 2008.

X. Jiang, G. Shen, Y. Lai, and J. Tian, “Development of an open 0.3 T NdFeB MRI magnet,” IEEE Trans. Applied Superconductivity, vol. 14, pp. 1621-1623, 2004.

A. Podol'Skii, “Design procedure for permanent magnet assemblies with uniform magnetic fields for MRI devices,” IEEE Trans. Magnetics, vol. 36, pp. 484-490, 2000.

A. Podol'skii, “Development of permanent magnet assembly for MRI devices,” IEEE Trans. Magnetics, vol. 34, pp. 248-252, 1998.

D. Kim, B. Kim, J. Lee, W. Nah, and I. Park, “3-D optimal shape design of ferromagnetic pole in MRI magnet of open permanent-magnet type,” IEEE Trans. Applied Superconductivity, vol. 12, pp. 1467-1470, 2002.

T. Tadic and B. G. Fallone, “Three-dimensional nonaxisymmetric pole piece shape optimization for biplanar permanent-magnet MRI systems,” IEEE Trans. Magnetics, vol. 47, pp. 231-238, 2011.

T. Tadic and B. Fallone, “Design and optimization of a novel bored biplanar permanent-magnet assembly for hybrid magnetic resonance imaging systems,” IEEE Trans. Magnetics, vol. 46, pp. 4052-4058, 2010.

J. Lee and J. Yoo, “Topology optimization of the permanent magnet type MRI considering the magnetic field homogeneity,” Journal of Magnetism and Magnetic Materials, vol. 322, pp. 1651-1654, 2010.

J. Kennedy and R. Eberhart, “Particle swarm optimization,” IEEE International Conference of Neural Networks, Perth, Australia, pp. 1942-1948, 1995.

Y. del Valle, G. Venayagamoorthy, S. Mohagheghi, J. Hernandez, and R. Harley, “Particle swarm optimization: Basic concepts, variants and applications in power systems,” IEEE Trans. Evolutionary Computation, vol. 12, pp. 171-195, 2008.

J. Robinson and Y. Rahmat-Samii, “Particle swarm optimization in electromagnetics,” IEEE Trans. Antennas and Propagation, vol. 52, pp. 397-407, 2004.

M. AlRashidi and M. El-Hawary, “A survey of particle swarm optimization applications in electric power systems,” IEEE Trans. Evolutionary Computation, vol. 13, pp. 913-918, 2009.

J. Park, Y. Jeong, J. Shin, and K. Lee, “An improved particle swarm optimization for nonconvex economic dispatch problems,” IEEE Trans. Power Systems, vol. 25, pp. 156-166, 2010.

R. Eberhart and Y. Shi, “Tracking and optimizing dynamic systems with particle swarms,” Proceedings of the 2001 Congress on Evolutionary Computation, pp. 94-100, 2001.

Downloads

Published

2021-07-22

How to Cite

[1]
Yi-Yuan Cheng, Tao Hai, Yang-Bing Zheng, Bao-Lei Li, and Ling Xia, “Optimization and Design of Multi-ring Pole Pieces for Small-sized Permanent Magnetic Resonance Imaging Magnet”, ACES Journal, vol. 33, no. 09, pp. 1026–1033, Jul. 2021.

Issue

Section

Articles