Stochastic Analysis of Multi-conductor Cables with Uncertain Boundary Conditions

Authors

  • Gang Zhang School of Electrical Engineering and Automation Harbin Institute of Technology, Harbin, 150001, China
  • Jinjun Bai School of Electrical Engineering and Automation Harbin Institute of Technology, Harbin, 150001, China
  • Lixin Wang School of Electrical Engineering and Automation Harbin Institute of Technology, Harbin, 150001, China
  • Xiyuan Peng School of Electrical Engineering and Automation Harbin Institute of Technology, Harbin, 150001, China

Keywords:

EMC simulation, stochastic Galerkin method, uncertain boundary conditions, uncertainty analysis

Abstract

This paper provides two novel Stochastic Galerkin Method strategies to undertake stochastic analysis of the crosstalk in the multi-conductor cables with uncertain boundary conditions. Two different uncertain boundary conditions, stochastic lumped source and stochastic lumped load, are considered into stochastic Transmission Line Model. With the help of the Feature Selective Validation, it is verified that the proposed strategies is accurate by comparing with the reference results provided by Monte Carlo Method. At last, advantage of the proposed strategies in computational efficiency is presented.

Downloads

Download data is not yet available.

References

S. Sun, G. Liu, J. L. Drewniak, et al., “Handassembled cable bundle modeling for crosstalk and common-mode radiation prediction,” IEEE Transactions on Electromagnetic Compatibility, vol. 49, no. 3, pp. 708-718, 2007.

D. Bellan and S. A. Pignari, “Efficient estimation of crosstalk statistics in random wire bundles with lacing cords,” IEEE Transactions on Electromagnetic Compatibility, vol. 53, no. 1, pp. 209-218, 2011.

G. Spadacini and S. A. Pignari, “Numerical assessment of radiated susceptibility of twisted-wire pairs with random nonuniform twisting,” IEEE Transactions on Electromagnetic Compatibility, vol. 55, no. 5, pp. 956-964, 2013.

D. Xiu and G. E. Karniadakis, “The Wiener Askey polynomial chaos for stochastic differential equations,” SIAM Journal on Scientific Computing, vol. 24, no. 2, pp. 619-644, 2002.

D. Xiu, Numerical Methods for Stochastic Computations. Princeton University Press, pp. 1-23, 2010.

I. S. Stievano, P. Manfredi, and F. G. Canavero, “Stochastic analysis of multiconductor cables and interconnects,” IEEE Transactions on Electromagnetic Compatibility, vol. 53, no. 2, pp. 501-507, 2011.

P. Manfredi and F. G. Canavero, “Numerical calculation of polynomial chaos coefficients for stochastic per-unit-length parameters of circular conductors,” IEEE Transactions on Magnetics, vol. 50, no. 3, pp. 74-82, 2014.

P. Manfredi and F. Canavero, “Statistical analysis of multiconductor cables and interconnects with internal variability and field coupling,” 42nd European Microwave Conference, pp. 348-351, 2012.

IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations. IEEE STD 15971-2008, pp. 1-41, 2008.

IEEE Recommended Practice for Validation of Computational Electromagnetics Computer Modeling and Simulations. IEEE STD 15972-2010, pp. 1-124, 2011.

A. Duffy, A. Orlandi, and G. Zhang, “Review of the feature selective validation method (FSV). Part I: Theory,” IEEE Transactions on Electromagnetic Compatibility, vol. 6, no. 4, pp. 814-821, 2018.

A. Orlandi, A. P. Duffy, and G. Zhang, “Review of the feature selective validation method. Part II: Performance analysis and research fronts,” IEEE Transactions on Electromagnetic Compatibility, vol. 6, no. 4, pp. 1029-1035, 2018.

J. Bai, L. Wang, and D. Wang, “Validity evaluation of the uncertain EMC simulation results,” IEEE Transactions on Electromagnetic Compatibility, vol. 59, no. 3, pp. 797-804, 2017.

Downloads

Published

2021-07-22

How to Cite

[1]
Gang Zhang, Jinjun Bai, Lixin Wang, and Xiyuan Peng, “Stochastic Analysis of Multi-conductor Cables with Uncertain Boundary Conditions”, ACES Journal, vol. 33, no. 08, pp. 847–853, Jul. 2021.

Issue

Section

Articles