A Quadruple Band-Notched UWB Antenna by Using Arc-Shaped Slot and Rotated E-shaped Resonator

Authors

  • Yuanyuan Kong College of Information and Communications Engineering Harbin Engineering University, Harbin 150001, China
  • Yingsong Li College of Information and Communications Engineering Harbin Engineering University, Harbin 150001, China
  • Wenhua Yu 2COMU, Inc. 4031 University Drive, Suite 100, Fairfax, VA 22030, USA
  • Kai Yu College of Information and Communications Engineering Harbin Engineering University, Harbin 150001, China

Keywords:

Arc-shaped slot, monopole antenna, quadruple notch bands, rotated E-shaped resonator, UWB antenna

Abstract

A simple quadruple band-notched ultra-wideband (UWB) antenna is proposed and its performance is investigated both numerically and experimentally. The proposed quadruple band-notched UWB antenna is realized based on an asymmetric planar monopole antenna which consists of a fan-shaped radiation patch, a microstrip feeding line and a trapezoidal ground plane. By etching an arc-shaped slot with a gap and adding a rotated E-shaped resonator beside the microstrip feeding line, four notched bands are achieved to suppress potential interferences from WiMAX (3.3-3.6 GHz), WLAN (5.15-5.35 GHz, 5.725-5.825 GHz) and uplink of X-band satellite communication system (7.9-8.4 GHz). The proposed monopole antenna can operate over 2.94-12 GHz band with VSWR<2 except these notch bands. Simulation and measurement results of the fabricated prototype demonstrate that the proposed antenna has quadruple band-notched characteristics and near-omnidirectional radiation patterns, making it suitable for UWB communication applications.

Downloads

Download data is not yet available.

References

I. Oppermann, M. Hamalainen, and J. Iinatti, UWB Theory and Applications. New York: Wiley, pp. 3- 4, 2004.

A. Nouri and G. R. Dadashzadeh, “A compact UWB band-notched printed monopole antenna with defected ground structure,” IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 1178-1181, 2011.

Y. S. Li, X. D. Yang, C. Y. Liu, and T. Jiang, “Compact CPW-fed ultra-wideband antenna with dual band-notched characteristics,” Electronics Letters, vol. 46, no. 14, pp. 867-868, 2010.

J. Kim, C. S. Cho, and J. W. Lee, “5.2 GHz notched ultra-wideband antenna using slot-type SRR,” Electronics Letters, vol. 42, no. 6, pp. 315-316, 2006.

M.-C. Tang, S. Xiao, T. Deng, D. Wang, J. Guan, B. Wang, and G.-D. Ge, “Compact UWB antenna with multiple band-notches for WiMAX and WLAN,” IEEE Transactions on Antennas and Propagation, vol. 59, no. 4, pp. 1372-1376, 2011.

D. Jiang, Y. Xu, R. Xu, and W. Lin, “Compact dual-band-notched UWB planar monopole antenna with modified CSRR,” Electronics Letters, vol. 48, no. 20, pp. 1250-1252, 2012.

M. Ojaroudi, N. Ojaroudi, and N. Ghadimi, “Dual band-notched small monopole antenna with novel coupled inverted U-ring strip and novel forkshaped slit for UWB applications,” IEEE Antennas and Wireless Propagation Letters, vol. 12, pp. 182- 185, 2013.

J. R. Kelly, P. S. Hall, and P. Gardner, “Bandnotched UWB antenna incorporating a microstrip open-loop resonator,” IEEE Transactions on Antennas and Propagation, vol. 59, no. 8, pp. 3048-3048, 2011.

Y. Li, W. Li, and W. Yu, “A switchable UWB slot antenna using SIS-HSIR and SIS-SIR for multimode wireless communications applications,” Applied Computational Electromagnetics Society Journal, vol. 27, no. 4, pp. 340-351, 2012.

M. M. S. Taheri, H. R. Hassani, and S. M. A. Nezhad, “UWB printed slot antenna with Bluetooth and dual notch bands,” IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 255-258, 2011.

Y. Li, W. Li, and Q. Ye, “A reconfigurable wide slot antenna integrated with SIRs for UWB/multiband communication applications,” Microwave and Optical Technology Letters, vol. 55, no. 1, pp. 52-55, 2013.

L. Li, Z.-L. Zhou, and J.-S. Hong, “Compact UWB antenna with four band-notches for UWB applications,” Electronics Letters, vol. 47 no. 22, 2011.

W. Jiang and W. Che, “A novel UWB antenna with dual notched bands for WIMAX and WLAN applications,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 293-296, 2012.

Y. Li, W. Li, and R. Mittra, “Miniaturized CPWfed UWB antenna with dual frequency rejection bands using stepped impedance stub and arcshaped parasitic element,” Microwave and Optical Technology Letters, vol. 56, no. 4, pp. 783-787, 2014.

Z.-H. Wu, F. Wei, X.-W. Shi, and W.-T. Li, “A compact quad band-notched UWB monopole antenna loaded one lateral l-shaped slot,” Progress in Electromagnetics Research, vol. 139, pp. 303- 315, 2013.

S. H. Zainud-Deen, R. A. Al-Essa, and S. M. M. Ibrahem, “Ultrawideband printed elliptical monopole antenna with four band-notch characteristics,” IEEE Antennas and Propagation Society International Symposium (APSURSI), pp. 1-4, 2010.

R. Azim, M. T. Islam, and A. T. Mobashsher, “Design of a dual band-notch UWB slot antenna by means of simple parasitic slits,” IEEE Antennas and Wireless Propagation Letters, vol. 12, pp. 1412-1415, 2013.

M. J. Almalkawi and V. K. Devabhaktuni, “Quad band-notched UWB antenna compatible with WiMAX/INSAT/lower–upper WLAN applications,” Electronics Letters, vol. 47, no. 19, pp. 1062-1063, 2013.

Y. Li, W. Li, and Q. Ye, “A reconfigurable triple notch band antenna integrated with defected microstrip structure band-stop filter for ultrawideband cognitive radio applications,” International Journal of Antennas and Propagation, vol. 2013, Article ID: 472645, pp. 1-13, 2013.

K. Hiraguri, K. Koshiji, and F. Koshiji, “A wideband antenna with fan-shaped and trapezoidal elements on printed circuit board for ultrawideband radio,” IEEE 2nd Global Conference on Consumer Electronics, pp. 267-268, 2013.

F. Koshiji, Y. Akiyama, S. Itaya, and K. Koshiji, “A wideband antenna with fan-shaped and trapezoidal elements for ultra-wideband radio,” 2012 International Symposium on Antennas and Propagation (ISAP), pp. 838-841, 2012.

Downloads

Published

2021-08-08

How to Cite

[1]
Yuanyuan Kong, Yingsong Li, Wenhua Yu, and Kai Yu, “A Quadruple Band-Notched UWB Antenna by Using Arc-Shaped Slot and Rotated E-shaped Resonator”, ACES Journal, vol. 31, no. 11, pp. 1315–1321, Aug. 2021.

Issue

Section

General Submission