A Simple UWB Tapered Monopole Antenna with Dual Wideband-Notched Performance by Using Single SRR-Slot and Single SRR-Shaped Conductor-Backed Plane
Keywords:
Antenna, filter, complementary split ring resonator, notch, rectangular single split-ring resonators, ultrawideband, X-bandAbstract
This paper presents the design of a compact UWB antenna with dual band-notch characteristics in the 5 GHz band and X-band satellite communications. The proposed antenna consists of a tapered antenna fed by a microstip feed-line presenting a modified ground plane to achieve a wide impedance bandwidth, in the interval 2.8-12 GHz, with VSWR<2. The electromagnetic coupling of the tapered patch with the rectangular split ring resonator shaped parasitic conductor placed in the ground plane yields the first frequency notch which ranges from 5.05 to 5.95 GHz, in order to eliminate the dedicated short-range communications and wireless local area network interferences. The rejection of the X-band from 7.25 to 8.4 GHz, is achieved by etching a single rectangular split ring resonator slot in the radiator patch. Prototypes of the proposed antenna design were measured and compared to simulations, and good agreement was obtained.
Downloads
References
Federal Communications Commission, “Federal Communications Commission revision of Part 15 of the commission’s rules regarding ultra-wideband transmission system from 3.1 to 10.6 GHz,” Washington, DC, USA, 2002.
M. Rostamzadeh, S. Mohamadi, J. Nourinia, C. Ghobadi, and M. Ojaroudi, “Square monopole antenna for UWB applications with novel rodshaped parasitic structures and novel V-shaped slots in the ground plane,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 446-449, 2012.
N.-I. Jo, C.-Y. Kim, D.-O. Kim, and H.-A. Jang, “Compact ultrawideband antenna with quadrupleband rejection characteristics using SRR/CSRR structure,” Journal of Electromagnetic Waves and Applications, vol. 26, no. 5-6, pp. 583-592, 2012.
M. Rostamzadeh, S. Mohamadi, J. Nourinia, C. Ghobadi, and M. Ojaroudi, “Square monopole antenna for UWB applications with novel rodshaped parasitic structures and novel V-shaped slots in the ground plane,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 446-449, 2012.
K. G. Thomas and M. A. Sreenivasan, “A simple ultrawideband planar rectangular printed antenna with band dispensation,” IEEE Transactions on Antennas and Propagation, vol. 58, no. 1, pp. 27- 34, 2010.
R. Azim, M. T. Islam, J. S. Mandeep, and A. T. Mobashsher, “A planar circular ring ultra-wideband antenna with dual bandnotched characteristics,” Journal of Electromagnetic Waves and Applications, vol. 26, no. 14-15, pp. 2022-2032, 2012.
S. Mohammadi, J. Nourinia, C. Ghobadi, and M. Majidzadeh, “Compact CPW-fed rotated squareshaped patch slot antenna with band-notched function for UWB applications,” Electronics Letters, vol. 47, no. 24, pp. 1307-1308, 2011.
H.-W. Liu, C.-H. Ku, T.-S. Wang, and C.-F. Yang, “Compact monopole antenna with band-notched characteristic for UWB applications,” IEEE Antennas and Wireless Propagation Letters, vol. 9, pp. 397-400, 2010.
M. C. Tang, et al., “Compact UWB antenna with multiple band-notches for WiMAX and WLAN,” IEEE Trans. Antennas Propagation, vol. 59, no. 4, pp. 1372-1376, Apr. 2001.
J. Y. Siddiqui, C. Saha, and Y. M. M. Antar, “Compact dual-SRR-loaded UWB monopole antenna with dual frequency and wideband notch characteristics,” IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 100-103, 2015.
D. Sarkar, K. V. Srivastava, and K. Saurav, “A compact microstrip-fed triple band-notched ultrawideband monopole antenna,” IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 396-399, 2014.
M. S. A. Rani, S. K. A. Rahim, M. R. Kamarudin, T. Peter, S. W. Cheung, and B. M. Saad, “Electromagnetic behaviors of thin film CPW-fed CSRR loaded on UWB transparent antenna,” IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 1239-1242, 2014.
M. M. Islam, M. R. I. Faruque, and M. T. Islam, “A compact 5.5 GHz band-rejected UWB antenna using complementary split ring resonators,” The Scientific World Journal, vol. 2014.
Q. Wang and Y. Zhang, “Design of a compact UWB antenna with triple band-notched characteristics,” International Journal of Antennas and Propagation, vol. 2014.
M. C. Tang, “Compact UWB antenna with multiple band-notches for WiMAX and WLAN,” IEEE Trans. Antennas Propagation, vol. 59, no. 4, pp. 1372-1376, 2001.
T. Yuan, C.-W. Qiu, L. W. Li, M. S. Leong, and Q. Zhang, “Elliptically shaped ultra-wideband patch antenna with band-notch features,” Microw. Opt. Tech. Lett., vol. 50, no. 3, pp. 736-738, 2008.
J. Baena, J. Bonache, F. Martín, R. Marqués, F. Falcone, T. Lopetegi, M. Laso, J. Gil, M. Flores, and M. Sorolla, “Equivalent circuit models for split ring resonators and complementary split ring resonators coupled to planar transmission lines,” IEEE Trans. Microwave Theory and Techniques, vol. 53, no. 4, pp. 1451-1461, Apr. 2005.
P. Wang, “Compact dual band-reject monopole antenna for UWB applications,” Applied Computational Electromagnetics Society ACES, vol. 28, no. 8, pp. 725-730, 2013.
J. Y. Siddiqui, C. Saha, and Y. M. M. Antar, “Compact SRR-loaded UWB circular monopole antenna with frequency notch characteristics,” IEEE Antennas and Wireless Propagation Letters, vol. 62, no. 8, pp. 4015-4020, 2014.