Optimisation topologique de surfaces additionnelles de tôles embouties
Keywords:
sheet metal forming, inverse approach, topologic optimization, evolutionary optimization, additional surfacesAbstract
In this paper we present a new numerical approach for topologic optimization of additional surfaces (called addendum surfaces) which play an important role upon the quality of the final workpiece. This new approach is based on the coupling between an inverse approach used for the deep drawing simulation and an evolutionary algorithm. The results concerning shape optimization of additional surfaces of the square cup (Benchmark of Numisheet’93) and the Twingo dashpot cup show the efficiency and the industrial interest of the proposed approach.
Downloads
References
Batoz J.L., Duroux P., Guo Y.Q., Detraux J.M., “An efficient algorithm to estimate the large
strains in deep drawing”, NUMIFORM 89, 1989, p. 383-388.
Batoz J.L., Dhatt G., Modélisation des structures par éléments finis, vol. 3, Coques Ed.
Hermès, Paris 1992.
Batoz J.L., Guo Y.Q., “Analysis and design of sheet forming parts using a simplified inverse
approach”, COMPLAS V, Barcelona, Spain, 1997, p. 178-185.
Batoz J.L., Guo Y.Q., Mercier F., “The inverse approach with simple triangular shell elements
for large strain predictions of sheet metal forming parts”, Engineering Computations,
vol. 15, 1998, p. 864-892.
Bends¢e MP, Kikuchi N., “Generating optimal topologies in structural design using a
homogenisation method”, Comput Meth Appl Mech Engng, vol.71, 1998, p. 197-224.
Ben-Elechi S., Analyse et conception rapides de paramètres du procédé d’emboutissage pour
le contrôle du retour élastique, Thèse de Doctorat, Université de Technologie de
Compiègne, Déc. 2004.
Gelin J.C., Picart P., “4th Int. Conf. Numerical Simulation of 3D Sheet Metal Forming
processes”, NUMISHEET’99, Besançon, France, 1999.
Gerdeen J.C., Chen P., “Geometric mapping method of computer modeling of sheet metal
forming”, NUMIFORM 89, 1989, p. 437-444.
Ghouati O., Joannic D., Gelin J.C., “Optimisation of process parameters for the control of
springback in deep drawing”, NUMIFORM’98, Balkema, 1998.
Guo Y.Q., Batoz J.L., Detroux J.M., Duroux P., “Fine element procedures for strain
estimation of sheet metal forming parts”, IJNME, vol. 39, 1990, p. 1385-1401.
Ken-Ichiro M., “Simulation of material processing: theory, methods and applications”,
Numiform’2001, 7th Int. Conf. on Numerical Methods in Industrial Forming Processes,
Toyohashi, Japan 2001.
Liu S.D., Assempoor A., “Development of FAST 3D. A design-oriented one step FEM in
sheet metal forming”, COMPLAS IV, Part II, 1995, 1515-1526.
Makinouchi A., Nakamachi E., Onate E., Wagoner R.H., “2nd Int. Conf. on Numerical
Simulation of 3D Sheet Forming processes - Verification of Simulation with
Experiment”, NUMISHEET’93, 1993.
Naceur H., Optimisation de forme de structures minces en presence de non linéarités
géométriques et matérielles, Thèse de l’Université de Technologie de Compiègne, 1998.
Ohata T., Nakamura Y., Katayama T., Nakamachi E., NAKANO K., “Development of optimum
process design system by numerical simulation”, Journal of Materials Process. Technol.,
, 1996, p. 543-548.
Pourboghrat F., Smith L.M., Stoughton T.B., Yoon J.W., Proceeding of the 6nd Int. Conf. on
Numerical Simulation of 3D Sheet Forming processes, Numisheet 2005, Detroit, Mi.,
USA, 2005.
Querin O.M., Young V., Steven G.P., Xie Y.M., “Computational efficiency and validation of
bi-directional evolutionary structural optimisation”, Comput Methods Appl. Mech.
Engrg., vol. 189, 2000, p. 559-573.
Sklad M.P., YUngblud B.A., “Analysis of multi-operation sheet forming processes”,
NUMIFORM 92, 1992, p. 543-547.
Xie YM, Steven GP., “A simple evolutionary procedure for structural optimisation”, Comput.
Struct., vol. 49, 1993, p. 885-896.
Xie YM, Steven GP., “Evolutionary structural optimisation for dynamic problems”, Comput.
Struct., vol. 58, 1996, p. 1067-1073.
Xie YM, Steven GP., Evolutionary Structural Optimisation. Berlin, Germany: Edition
Springer Verlag, 1997.
Yang RJ., Chuang CH., “Optimal topology design using linear programming”, Comput
Struct., vol. 52, 1994, p. 265-275.