Slope Stability Analysis Based on the Coupling of SA and Limit Equilibrium Mechanics
DOI:
https://doi.org/10.13052/ejcm2642-2085.3221Keywords:
Mechanical calculation, SA, optimization problem, limit equilibrium, slope stability calculationAbstract
The limit equilibrium strip method of slope has become mature, but because of the complexity of slope instability with many degrees of freedom and high nonlinear, a more three-dimensional and mature method is needed for slope problems. Based on the overall force balance and moment balance of slope, a unified model of three dimensional limit balance methods is established in this paper. Given different assumptions, the analytical expressions of each traditional model are obtained to avoid the problem of difficult boundary treatment when the original method is divided into bars and columns. The influence of the trailing edge point B and shear outlet A on the central axis of the sliding body, and the control arc radius variable t on the calculated value of the three-dimensional slope stability coefficient is discussed in detail. Then, based on the simulated annealing algorithm, the state generating function, state accepting function and temperature updating function are constructed, and the calculation method of optimizing the sliding surface search of the slope by using the simulated annealing algorithm is proposed, and the stability analysis of the slope of a hydropower reservoir dam area in Guangxi is carried out. The results show that the position of the sliding surface obtained by searching around the design value K = 1.10 is basically consistent with the actual one, which proves that the mechanical analysis method of coupling SA and limit equilibrium is convenient and efficient in the slope stability analysis.
Downloads
References
Huang Lin. Dynamic Stability analysis of stratified soil slope under earthquake [D]. Southwest Jiaotong University, 2017.
Song J, Wu K, Feng T, et al. Coupled seismic analysis of permanent deformation of shallow and deep failure surface of slope [J]. Engineering Geology, 2020, 274: 105688.
Ai Hui, Wu Honggang, Feng Wenqiang, et al. Shaking table test on deformation and failure mechanism of multi-sliding surface landslide [J]. Journal of Disaster Prevention and Mitigation Engineering, 2018, 38(1): 65–71.
Messai A, Belounar L, Merzouki T. Static and free vibration of plates with a strain based brick element[J]. European Journal of Computational Mechanics, 2018: 1–21.
Gholami M, Hassani A, Mousavi S S, et al. Bending analysis of anisotropic functionally graded plates based on three-dimensional elasticity[J]. European Journal of Computational Mechanics, 2019: 1–25.
Zhang Junwen, Zou Ye, Li Yulin. Failure mode and stability of large multilayer accumulations [J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(12): 2479–2489.
Yang Tao, Zhang Zhongping, Ma Huimin. Stability analysis and support selection of multi-story complex landslide [J]. Chinese Journal of Rock Mechanics and Engineering, 2007 (s2): 4189–4194.
Murdock J R, Yang S L. Hydrodynamic stability and turbulent transition with the Vreman LES SGS and a modified lattice Boltzmann equation[J]. European Journal of Computational Mechanics, 2018, 27(4): 277–301.
Vahdati M, Beigmoradi S, Batooei A. Minimising drag coefficient of a hatchback car utilising fractional factororial design algorithm[J]. European Journal of Computational Mechanics, 2018, 27(4): 322–341.
Ji J, Zhang W, Zhang F, et al. Reliability analysis of soil slope permanent displacement using simplified Bishop Method [J]. Computers and Geotechnics, 2020, 117: 103286.
Bandini V, Biondi G, Cascone E, et al. A GLE based model for seismic displacement analysis of slopes including strength degradation and geometry rearrangement[J]. Soil Dynamics and Earthquake Engineering, 2015, 71: 128–142.
Chen Chunshu, Xia Yuanyou. Real-time dynamic Newmark sliding block displacement method for slope Based on Limit Analysis [J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(12): 2507–2515.
Song Jian, Gao Guangyun. Unified prediction model of slope seismic displacement based on velocity pulse ground motion [J]. Chinese Journal of Geotechnical Engineering, 2013, 35(11): 2009–2017.
Jiang Xin. Application of Global Optimization in Searching the Most dangerous sliding Surface of slope [D]. Nanjing University, 2012.
Zhang Bin, Zhang Damin, Amin Han. Fruit Fly Optimization Algorithm based on Simulated Annealing [J]. Journal of Computer Applications, 2016, 36(11): 3118–3122.
He Qing, WU Yile, Xu Tongwei. Application of improved Genetic Simulated Annealing Algorithm in TSP Optimization [J]. Control and Decision, 2018 (2): 219–225. (in Chinese)
Gerber M, Bornn L. Improveving simulated annealing through derandomization[J]. Journal of Global Optimization, 2017, 68(1): 189–217.
Li Shouju, Liu Yingxi, He Xiang, et al. Global search method for a minimum safety factor of slope based on simulated annealing algorithm [J]. Chinese Journal of Rock Mechanics and Engineering, 2003, 22(2): 236–240.
Zhang Dan, Li Tongchun, Le Chengjun. Two methods for calculating safety factor of slope stability by transfer coefficient method [J]. Advances in Water Resources and Hydropower Science and Technology, 2004, 24(2): 23–25.
Chen Changfu, Gong Xiaonan. Chaotic perturbation heuristic ant colony Algorithm and its application in Search of Slope non-circular critical sliding Surface [J]. Chinese Journal of Rock Mechanics and Engineering, 2004, 23(20): 3450–3453.
Li Tonglu, Deng Hongke, Li Ping, et al. A new method for searching the potential sliding surface of simple soil slope [J]. Journal of Chang ’an University: Earth Science Edition, 2003, 25(3): 56–59.
Siegel R A, Kovacs W D, Lovell C W. Random surface generation in stability analysis [J]. Journal of the Geotechnical Engineering Division, 1981, 107(7): 996–1002.
Malkawi A I H, Hassan W F, Sarma S K. A global search method for locating common sliding surfaces using Monte Carlo techniques [J]. Journal of geotechnical and geoenvironmental engineering, 2001, 127(8): 688–698.
Li Tonglu, Wang Yan-xia, Deng Hong-ke. An improved 3D method for slope stability analysis [J]. Chinese Journal of Geotechnical Engineering, 2003, 25(5): 611–614.
Huang C C, Tsai C C. A New method for Stability analysis of three-dimensional asymmetric slope [J]. Chinese Journal of Geotechnical Engineering, 2000, 126(10): 917–927.
Wang Liujun. Study on Pseudo-dynamic method of Active Earth Pressure for Retaining Wall Based on Curved Surface Sliding [D]. Xi ’an: Chang ’an University, 2018.
Choudhury D, Nimbalkar S S. Seismic rotational displacement of gravity walls by pseudodynamic method[J]. International Journal of Geomechanics, 2008, 8(3): 169–175.
Lu Yulin, Bo Jingshan, Chen Xiaoran, et al. Stability calculation of sandy soil slope considering seepage and earthquake [J]. Journal of Chongqing University: Natural Science Edition, 2017, 40(1): 65–75.
Deng Yahong, Xu Zhao, Sun Ke, et al. A pseudo-dynamic seismic method for slope stability analysis considering wave effect [J]. Journal of Earth Sciences & Environment, 2019, 41(5).
Deng Dongping, Li Liang. Pseudo-static analysis of slope stability under earthquake based on a new sliding surface search method [J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(1): 86–98.
Hungr O. Bishop’s extension of a simplified method for slope stability analysis to three dimensions [J]. Geotechnique, 1987, 37(1): 113–117.
Chen R H, Chameau J L. Three-dimensional Limit Equilibrium Analysis of slope [J]. Geotechnique, 1983, 33(1): 31–40.
Ugai K, Leshchinsky D O V. Three-dimensional limit equilibrium and Finite element analysis: Comparison of results [J]. Soil and Foundation, 1995, 35(4): 1–7.
