Développement de modèles biomécaniques avec propriétés géométriques et mécaniques individualisées
Keywords:
finite element model, mechanical properties of bone, prosthesis, medical imageAbstract
The objective of the paper is to address the methodology developed to model bone and joints with individualised geometric and material properties from medical image data. The advantages of this modelling technique is its ability to study the ‘patient’ specificity. This should be of importance for quantifying bone and joint deformities and performing individualised preoperative planning surgery or orthopaedic treatment. In the same way, the efficiency of orthopaedic treatment with customised orthese or mechanical behaviour of implant in bone could be evaluated. Results would suggest improvement or development of new design.
Downloads
References
Baréa C., Ho Ba Tho M.C., Darmana R., Mansat M., “3D finite element study of glenoid
implants in total shoulder arthroplasty”, Proc. of the 3rd Conf. On Computer methods in
Biomechanics and Biomedical Engineering, Editions Gordon and Breach Science
Publishers, p. 471-479, 1998.
Barré C., Mise en place d’une méthodologie pour la conception et l’évaluation d’une prothèse
de hanche personnalisée, Rapport de DEA, Université Paris XII, 2000.
Carter D.R, Vasu R., Harris W.H., “Stress changes in the femoral head due to porous
ingrowth surface replacement arthroplasty”, Journal of Biomechanics,vol. 17, 1984, p.
-747.
Couteau B., Ho Ba Tho M.C., Darmana R., Brignola J.C., Arlaud J.Y., “Development of a
finite element model of a human femur with individualized geometry and mechanical
properties: validation by vibration analysis”, Technical Note Journal of Biomechanics,
vol. 31, 1998, p. 383-386.
Couteau B, Labey L, Ho Ba Tho M.C., Vander Sloten J, Arlaud J.Y., Brignola J.C.,
“Validation of a three dimensional finite element model of a human femur with a
customized hip implant”, Proc. of the 3rd Conf. On Computer methods in Biomechanics
and Biomedical Engineering, Editions Gordon and Breach Science Publishers, p. 147-
, 1998.
Estivalèzes E., Couteau B., Limbert G., Darmana R., Ho Ba Tho M.C., « Etude du
comportement mécanique d'un tibia sain et prothésé, modélisation par éléments finis et
validation expérimentale », Actes du 4e colloque national en calcul des structures, vol. II,
, p. 791-796.
Keyak J.H., Meager J.M., Skinner H.B., Mote C.D., “Automated three-dimensional finite
element modelling of bone : a new method”, Journal of Biomedical Engineering, vol. 12,
, p. 389-397.
Hinrichs M., Luu S., Roux F., Treutenaere J.M., Ho Ba Tho M.C., “In vivo analysis of the
pelvic bone before and after acetabular reconstruction by means of a three dimensional
finite element model”, Proc. of the 18th Congress of the International Society of
Biomechanics, 8-11 July 2001, Zurich, Editions ETH Zurich, p. 102.
Guo T., Ho Ba Tho M.C., “Patient specific simulation of long term behaviour of the interface
bone implant”, Proc of the 6th World Congress of Computational Mechanics, in press.
Ho Ba Tho M.C., Darmana R., Pastor P., Barrau J.J., Laroze S., Morucci J.P., “Development
of a three-dimensional finite element model of a human tibia using experimental modal
analysis”, Journal of Biomechanics, vol. 24, 1991, p. 371-383.
Ho Ba Tho M.C., Rho J.Y., Ashman R.B., “Atlas of mechanical properties of human cortical
and cancellous bone”, In vivo assessment of bone quality by vibration and wave
propagation techniques, Part II, 1992, Editions ACCO, Leuven, p. 7-38.
Ho Ba Tho M.C. Logiciel SIP 305, Logiciel de prétraitement d’images médicales, Scanner,
IRM. 1993, Copyright Inserm.
Ho Ba Tho M.C., Rho J.Y., Ashman R.B., “Anatomical variation of mechanical properties of
human cancellous bone in vitro”, in G. Lowet, P. Rüegsegger, H. Weinans and A.
Meunier (eds) Bone Research in Biomechanics, IOS Press,157-173, 1998.
Ho Ba Tho M.C., Luu S., Estivalèzes E., Baunin C., Cahuzac J.P., “Simulation of the 3D
motion of clubfoot bones using helical axes theory”, Suppl. Journal of Biomechanics,
vol. 31, 1998, p. 107.
Ho Ba Tho M.C., Treutenaere J.M., “Influence of acquisition parameters on QCT
measurements derived from CT”, Proc. of the 18th Congress of the International Society
of Biomechanics, 8-11 July 2001, Zurich, Editions ETH Zurich, p. 102-103.
Huiskes R., Chao E.Y.S., “A survey of finite element analysis in orthopaedic biomechanics:
the first decade” Journal of Biomechanics, vol. 16, 1983, p. 385-409.
Huiskes R., Verdonschot N., “Biomechanics of artificial joints : the hip”, Basic Orthopaedic
Biomechanics, Raven Press, 1997, p. 395-460.
Johnston C.E., Ho Ba Tho M.C., Baker K.J., Baunin C., “Three dimensional analysis of
clubfoot deformity using computed tomography”, Journal of Pediatric Orthopaedics,
vol. 4, Part B, 1995, p. 39-48.
Limbert G., Estivalèzes E., Ho Ba Tho M.C., Baunin C., Cahuzac J.P., “In vivo determination
of homogenised mechanical characteristics of human tibia. Application to the study of
tibial torsion in vivo”, Clinical Biomechanics, vol. 13, 1998, p. 473-479.
Mansat P., Baréa C., Ho Ba Tho M.C., Darmana R., Mansat M., “Anatomical variation of
mechanical properties of the glenoid”, Journal of Shoulder and Elbow Surgery, vol 7, n°2,
, p. 109-115.
Mullender M.G., Huiskes R., Weinans H., “A physiological approach to the stimulation of
bone remodeling as self organizational control process, Journal of Biomechanics, vol. 27,
, p. 1389-1394.
Périé D., Ho Ba Tho M.C., “In vivo determination of contact areas and pressure of the
femorotibial joint using non linear element analysis”, Clinical Biomechanics, vol. 13,
, p. 394-402.
Périé D., Sales de Gauzy J., Sévely A., Ho Ba Tho M.C., “In vivo geometrical evaluation of
Cheneau¯Toulouse¯Munster brace effect on scoliotic spine using MRI method”, Clinical
Biomechanics, vol. 16, 2001, p. 129-137.
Périé D., Ho Ba Tho M.C., Baunin C., Sales De Gauzy J., “Personalised mechanical
properties of scoliotic vertebrae determined in vivo using tomodensitometry”, Computer
Method in Biomechanics and Biomedical Engineering, vol.5, n°2, 2002, p. 161-165.
Prendergast, P. Finite element models in tissue mechanics and orthopaedic implant design.
Review paper, Clinical Biomechanics, vol. 12, 1997, p. 343-366.
Rho J.Y., Ho Ba Tho M.C., Ashman R.B., “Relations of mechanical properties to density and
CT numbers in human bone”, Medical Engineering Physics, vol. 17, n°5, 1995, p. 347-
Roach J.W., Ho Ba Tho M.C., Baker K.J., Ashman R.B., “Three-dimensional computer
analysis of complex acetabular insufficiency”, Journal of Pediatric Orthopaedics, vol. 17,
, p. 158-164.
Vander Sloten J., Ho Ba Tho M.C., Verdonck P., “Applications of computer modelling for the
design of orthopaedic, dental cardiovascular biomaterials”, Proceedings Institution of
Mechanical Engineers, vol. 212, Part H, 1998, p. 489-500.
Viceconti M., Zannoni C., Baruffaldi F, Pierotti L., Toni A., Cappello A., “CT scan data
acquisition to generate biomechanical models of bone structures”, Proc. of the 3rd Conf.
On Computer methods in Biomechanics and Biomedical Engineering, Editions Gordon
and Breach Science Publishers, p. 279-287, 1998.
