A Plasticity-Based Constitutive Framework for Multi-Scale Modeling of Mechanical Degradation in PEM Fuel Cell Membranes
DOI:
https://doi.org/10.13052/ejcm2642-2085.34342Keywords:
PEMFC, mechanical degradation, plasticity, swelling strain, numerical modelingAbstract
The long-term durability of polymer electrolyte membranes (PEMs) remains one of the key barriers to the widespread deployment of fuel cells. This work presents a plasticity-based constitutive framework for predicting membrane degradation under cyclic hydration and thermal loading. The model combines hydration- and temperature-dependent elasticity, swelling, and plastic strains with a pinhole growth law that is activated only when both mechanical plasticity and chemical degradation are present. A binary fluoride release rate (FRR) switch is introduced to couple chemical activity with defect growth in a computationally efficient manner.
Simulation results reproduce key experimental and modeling trends from the literature. Larger hydration amplitudes Δλ accelerate void growth and plastic strain accumulation, while thermal swings increase hydrostatic stresses and material softening, thereby enhancing defect evolution. The framework thus provides a physically consistent rationale for the coupled influence of hydration variability, thermal cycling, and chemical degradation on membrane lifetime.
While simplified in geometry and chemistry, the present approach captures the irreversible nature of plastic deformation and remains tractable for long-term cycling studies. It provides a robust basis for future extensions toward 2D/3D analyses and for integration into multi-physics durability assessments of PEM fuel cells.
Downloads
References
Ahmet Kusoglu and Adam Z. Weber. (2017). New insights into perfluorinated sulfonic-acid ionomers. Chemical Reviews 117(3), 987–1104.
Ahmet Kusoglu, Anette M. Karlsson, Michael H. Santare, Simon Cleghorn, and William B. Johnson. (2006). Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle. Journal of Power Sources 161(2), 987–996.
Ahmet Kusoglu, Anette M. Karlsson, Michael H. Santare, Simon Cleghorn, and William B. Johnson. (2007). Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses. Journal of Power Sources 170(2), 345–358.
Yaliang Tang, Anette M. Karlsson, Michael H. Santare, Michael Gilbert, Simon Cleghorn, and William B. Johnson. (2006). An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane. Materials Science and Engineering: A 425(1–2), 297–304.
Ahmet Kusoglu and Adam Z. Weber. (2014). A mechanistic model for pinhole growth in fuel-cell membranes during cyclic loads. Journal of The Electrochemical Society 161(8), E3311.
Victoria M. Ehlinger, Ahmet Kusoglu, and Adam Z. Weber. (2019). Modeling coupled durability and performance in polymer-electrolyte fuel cells: Membrane effects. Journal of The Electrochemical Society 166(14), F1259–F1271.
Hyoung Jun Lim, Geonwoo Kim, and Gun Jin Yun. (2023). Durability and performance analysis of polymer electrolyte membranes for hydrogen fuel cells by a coupled chemo-mechanical constitutive model and experimental validation. ACS Applied Materials & Interfaces 15(20), 24257–24270.
Mehdi Mehrtash, Ilker Tari, and Serhat Yesilyurt. (2018). Numerical modeling of visco-elasto-plastic hygro-thermal stresses and the effects of operating conditions on the mechanical degradation of PEFC membranes. Journal of Power Sources 396, 164–174.
Himanshu Pathak, Akhilendra Singh, and Indra Vir Singh. (2013). Fatigue crack growth simulations of bi-material interfacial cracks under thermo-elastic loading by extended finite element method. European Journal of Computational Mechanics/Revue Européenne de Mécanique Numérique 22(1), 79–104.
Jaka Dujc and Boštjan Brank. (2022). Modeling fracture in elasto-plastic solids by embedded-discontinuity stress-hybrid finite element formulation. Mechanics of Advanced Materials and Structures 29(5), 677–693.
Virginie Bonnaillie-Noël, Delphine Brancherie, Marc Dambrine, Sébastien Tordeux, and Grégory Vial. (2010). Effect of micro-defects on structure failure coupling asymptotic analysis and strong discontinuity. European Journal of Computational Mechanics 19(1–3), 165–175.
Kais Ammar, Benoît Appolaire, Georges Cailletaud, and Samuel Forest. (2009). Combining phase field approach and homogenization methods for modelling phase transformation in elastoplastic media. European Journal of Computational Mechanics 18(5–6), 485–523.
Jaka Dujc and Boštjan Brank. (2022). Combining coupled, staggered and uncoupled solution methods for phase-field-based fracture analysis. Mechanics of Advanced Materials and Structures 29(27), 6361–6378.
E. Scoletta and J. O. Schumacher. (2025). A modelling framework for the simulation of coupled performance-degradation phenomena in proton exchange membrane fuel cells. Proceedings of ModVal 2025, Karlsruhe, Germany, March 11–12.
R. P. Schaerer and J. O. Schumacher. (2025). Electrochemical interface model coupling oxygen reduction and degradation reactions in the cathode catalyst layer of a PEMFC. Proceedings of ModVal 2025, Karlsruhe, Germany, March 11–12.
Victoria M. Ehlinger. (2020). Modeling Membrane Degradation in Proton-Exchange-Membrane Fuel Cells. PhD thesis, University of Berkeley.
COMSOL. (2022). http://www.comsol.com.
