Methode des elements finis specifique aux ossatures mixtes acier-beton avec glissements et grands deplacements
Keywords:
steel and concrete composite beams and frames, partial connection, slip, generalized coordinate reference, composite beam finite elementAbstract
In order to analyse the behaviour of braced or unbraced steel and concrete composite frames with full or partial shear connections, an original finite element model using approximate updated Lagrangian formulation is developed. The choice of slip as a nodal degree of freedom leads to the approximate kinonatic transformations which are necessary for the assemblage of matrices of steel and concrete parts (stiffness matrices and vectors of nodal forces). After the demonstration of the validity of the model for different aspects (geometrical nonlinearity, material non linearity, slip, etc), some applications of the model show clearly the improvement in lateral stiffness and ultimate resistance of composite fra-mes compared to the same frame but composed of only steel members.
Downloads
References
[ARI 85) ARIBERT J.M. et ABDELAZIZ K. "Calcul des poutres mixtes jusqu'a l'etat ultime.
avec un effet de soulevement a !'interface acier-beton", Construction Merallique, n °4, 1985.
[ARI 86] ARIBERT J.M. et ABDEL AZIZ K. "Modele general pour le calcul des poutres
mixtes hyperstatiques jusqu'a Ia ruine", Construction Metallique, n °4, 1986.
[ARI 90] ARIBERT J.M. "Slip and Uplift Measurements along the Steel and Concrete Interface
of Various Types of Composite Beams", Proceedings of the International Workshop RILEM,
"Testing of Metals for Structures". Chapman and Hall, Naples, May 1990.
[BAT 82) BATHE K.J. "Finite Element Procedures in Engineering Analysis", Prentice-Hall,
Englewood Cliffs, N.J., 1982.
[BOE 91) BOERAEVE P. "Contribution a !'analyse statique non lineaire des structures mixtes
planes formees de poutres, avec prise en compte des effets differes et des phases de construction",
These de doctoral, Universite de Liege, 1991.
[CCE 92) Commission des Communautes Europeennes, Eurocode 3 "Calcul des structures en
acier, Partie 1.1: Regles generales et regles pour les batiments", Eurocode 3, Avrill992.
[CCE 92) Commission des Communautes Europeennes, Eurocode 4 "Conception et dimensionnement
des structures mixtes acier-beton, Partie 1.1. : Regles generales et regles pour les
batiments", Octobre 1992.
[DAN 89) DANIELS B.J. "Non linear analysis of composite members in bending and shear",
Rapport /COM 223, EPFL, Lausanne, 1989.
[GAL 78] GALEA Y. "Programme d'analyse elasto-plastique non-lineaire de structures planes
a barres". Construction Merallique, n °4, 1978.
[GAL 86] GALEA Y. "Programme d'analyse de structures planes a barres avec liasons semirigides
a comportement non-lineaire", Construction Merallique, n °2, 1986.
[GAL 92] GALEA Y. et BUREAU A. "PEP-micro, analyse plastique au second ordre de
structures planes a barres", Manuel d'utilisation, version 2.0, CTICM FRANCE. Mars 1992.
[MAT 81) MATTIASSON K. "Numerical results from large deflection beam as frame problems
analyzed by means of elliptic integrals", Int. j. numer. methods eng., 17, 1981.
[PIA 86] PIAZZA M. et TURRINI G. "L'influenza della deformabilita delle connessioni sui
comportamento delle travi composte", Costruzioni metalliche no 6, 1986.
[SCH 88]SCHANZENBACH J. "Zum Einfluss von Diibelnachgiebiegkeit und unter Verdiibelung
auf das Tragvcrhalten von Verbunddurchlauftragern im hoch-und industriebau",
These de doctoral, Universite de Kaiserslautern, 1988.
[ZHA 94) ZHAO B. "Modelisation numerique des poutres et portiques mixtes acier-beton
avec glissements et grands deplacements- Resistance a l'incendie", These de doctoral, IN SA
de Rennes, 1994.
