Seismic Performance Analysis of Reinforced Concrete Frame Structures Based on Computational Mechanics
DOI:
https://doi.org/10.13052/ejcm1779-7179.3014Keywords:
reinforced concrete; seismic performance; building structure;Abstract
In order to study the degradation law and seismic performance of reinforced concrete frame structure with the extension of service time under normal service environment, the multi-scale modeling of corroded reinforced concrete frame is carried out by using the general finite element analysis software ABAQUS. The correctness of the multi-scale modeling method is verified by the experimental data of corroded reinforced concrete members and single frame. The pushover analysis and elastic-plastic time history analysis of a four story reinforced concrete frame structure are carried out by using a multi-scale model. Then the seismic response and damage of RC frame structures with different service time are compared. The experimental results show that the established seismic performance model of reinforced concrete frame structure is more practical in practical application and can meet the research requirements.
Downloads
References
Ibrahim E M, Abbas Z K . Effect of magnetic water on strength properties of concrete[J]. IOP Conference Series: Materials Science and Engineering, 2021, 1067(1):012002 (12 pp).
Elzahra I H A, Al-Sherrawi M H . Enhancement of self-healing to mechanical properties of concrete[J]. IOP Conference Series Materials Science and Engineering, 2021, 1117(1):012026.
Yang H, Jiao S, Sun P . Bayesian-Convolutional Neural Network Model Transfer Learning for Image Detection of Concrete Water-Binder Ratio[J]. IEEE Access, 2020, PP(99):1–1.
Wan S, Huang Q, Guan J . Test on flexural behavior of steel-concrete composite beams strengthened with prestressed carbon fiber-reinforced polymer plates[J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2019, 51(3):80–87.
Pouraminian M, Pourbakhshian S . Multi-criteria shape optimization of open-spandrel concrete arch bridges: Pareto front development and decision-making[J]. Military Operations Research, 2019, 16(5): 670–680.
Zheng L Q, Li G H, Zhou J Z, et al. Behavior of three-chord concrete-filled steel tube built-up columns subjected to eccentric compression[J]. Journal of Constructional Steel Research, 2020, 177(482):106435.
Lu Y, Zhang Q, Xue Y, et al. Hypervelocity penetration of concrete targets with long-rod steel projectiles: experimental and theoretical analysis[J]. International Journal of Impact Engineering, 2021, 148(2):103742.
Zhang X, Yang Z J, Huang Y J, et al. Micro CT Image-based Simulations of Concrete under High Strain Rate Impact using a Continuum-Discrete Coupled Model[J]. International Journal of Impact Engineering, 2021, 149(10):103775.
Evstratova A V, Krishtalevich A K, Belov V V, et al. Design of prefabricated reinforced concrete structures: comparative analysis of prefabricated reinforced concrete floor slab[J]. IOP Conference Series Materials Science and Engineering, 2021, 1103(1):012023.
Ra Gipani R, Escobar E, Prentice D, et al. Selective sulfur removal from semi-dry flue gas desulfurization coal fly ash for concrete and carbon dioxide capture applications[J]. Waste Management, 2021, 121(12):117–126.
Tiberti S, Scuro C, Porzio S, et al. Post-Cracking B-FRCM Strengthening of a Traditional Anti-Seismic Construction Technique (Casa baraccata): Extensive Experimental Investigations[J]. Key Engineering Materials, 2019, 817(6):634–641.
Ohsumi M, Nanazawa T, Tanimoto S, et al. Development of a Seismic-Performance Assessment Method and Retrofitting Technology Against the Liquefaction of Existing Bridges[J]. Journal of Disaster Research, 2019, 14(2):269–278.
Y Shi, Y Wang, Feng H, et al. Design, Fabrication and Test of a Low Range Capacitive Accelerometer With Anti-Overload Characteristics[J]. IEEE Access, 2020, 8(10):26085–26093.
Luo Z, Xue J, Zhou T, et al. Shaking table tests and seismic design suggestions for innovative suspended ceiling systems with detachable metal panels[J]. Engineering Structures, 2021, 232(10):111830.
Custodi A, Santopuoli N . Modeling and Design of the Restoration and Seismic Strengthening of the Sanctuary of Santa Maria Delle Grazie at Fornò under New Italian Rules NTC 2018[J]. Key Engineering Materials, 2019, 817(9):650–658.
Moleiro F, Carrera E, Ferreira A, et al. Hygro-thermo-mechanical modelling and analysis of multilayered plates with embedded functionally graded material layers[J]. Composite Structures, 2020, 233(9):111442.
Oliveira H L, Chateauneuf A, Leonel E D. Probabilistic mechanical modelling of concrete creep based on the boundary element method[J]. Advances in Structural Engineering, 2019, 22(2):337–348.
Zhang J, Zhou J J, Cheng Z K, et al. Fabrication, Mechanical Modeling, and Experiments of a 3D-Motion Soft Actuator for Flexible Sensing[J]. IEEE Access, 2020, PP(99):1–1.
Blanchard J M F A, Mutlu U, Sobey A J, et al. Modelling the different mechanical response and increased stresses exhibited by structures made from natural fibre composites[J]. Composite Structures, 2019, 215(MAY):402–410.
Nonlinear modeling and characterization of ultrasoft silicone elastomers[J]. Applied Physics Letters, 2020, 116(20):203702.
Musa S S, Zhao S, He D, et al. The Long-Term Periodic Patterns of Global Rabies Epidemics Among Animals: A Modeling Analysis[J]. International Journal of Bifurcation and Chaos, 2020, 30(3):2050047.
