Vibration Based Damage Detection in Plate-Like Structure Using Square of Mode Shape Curvature
DOI:
https://doi.org/10.13052/ejcm1958-5829.2841Keywords:
mode shape curvature; damage identification; modal analysis; plate-like structure; Polytech laser vibrometer.Abstract
In this current work, a new methodology based on the square of mode shape curvature (SMSC) is presented that relates the mode shapes and its curvature changes before and after the damage for localization and sizing of the surface crack in plate-type structures. The significance of this method is it has the capability to portray accurate shape and exact location of the surface crack in a plate-like structure which are related to low and high elastic modes on dense and coarse measurement grids. The efficiency of the proposed SMSC is examined using experimental and numerical data acquired from modal analysis on the aluminum plate containing single and multi-surface cracks with a fixed-free condition using non-contact measurement a scanning laser vibrometer and on simple finite element plate model. As evidence of experimental and numerical study results, highly accurate crack characterization has been attained through the proposed method. In implementing this method, only a few modes of the structure are required. Further, the impact of the mode order on the effectiveness of crack detection, boundary distortion treatment, and grid density analysis was also performed by the proposed method.
Downloads
References
Doebling, S. W., Farrar, C. R. & Prime, M. B. (1998). A Summary Review of Vibration-Based Damage Identification Methods, The Shock and Vibration Digest, 30, 91-105.
Doebling, S. W., Farrar, C. R., Prime, M. B., & Shevitz, D. W. (1996). Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review. Los Alamos National Laboratory Rep.
Pandey A.K., & Biswas M., Samman, M.M. (1991). Damage detection form changes in curvature mode shapes. Journal of Sound and Vibration, 145, 321-332.
Cawley, P., & Adams R.D. (1979). The location of defects in structure from measurements of natural frequencies. The Journal of Strain Analysis for Engineering Design, 14, 49-57.
Shi, Z. Y., Law, S. S., & Zhang, L. M. (1998). Structural Damage Localization from Modal Strain Energy Change. Journal of Sound and Vibration, 218, 825-844.
Shi, Z. Y., Law, S. S., & Zhang, L. M. (2000). Structural Damage Detection from Modal Strain Energy Change. Journal of Engineering Mechanics, 126, 1216-1223.
Cornwell, P. J., Dobeling, S. W., & Farrar, C. R. (1997). Application of the Strain Energy Damage Detection Method to Plate-Like Structures. Proceedings of the 15th International Modal Analysis Conference, 1312-1318.
Cornwell, P. J., Dobeling, S. W., & Farrar, C. R. (1999). Application of the Strain Energy Damage Detection Method to Plate-Like Structures. Journal of Sound and Vibration, 224, 359-374.
Kim, J., & Ryu, Y.S. (2003). “Damage identification in beam-type structures: frequency-based method vs mode-shape-based method. Engineering Structures, 25, 57–67.
Rucevskis, S., Wesolowski, M., & Chate, A. (2009). Vibration‐based damage detection in a beam structure with multiple damage locations. Aviation, 13, 61-71.
Wu, D., & Law, S.S. (2004). Damage localization in plate structures from uniform load surface curvature. Journal of Sound and Vibration, 276, 227–244.
Ho, Y. K., & Ewins, D. J. (2000). On structural damage identification with mode shapes. International conference on System Identification and Structural Health Monitoring,677–686.
Yan, Y. J., Cheng, L., Wu, Z. Y., & Yam, L. H., (2007). Development in vibration-based structural damage detection technique. Mechanical Systems and Signal Processing, 21, 2198–2211.
Barbieri, N., Barbieric, R., & Silva, H.A.T. (2015). A methodology for identification of damage in beams. Inverse Problems in Science and Engineering, 124, 482-503.
Fan, W., & Qiao P. Z. (2011). Vibration-based damage identification methods: a review and comparative study. Structural Health Monitoring, 10, 83–111.
Pandey, A.K., & Biswas, M. (1994). Damage detection in structure using change in flexibility. Journal of Sound and Vibration, 169, 3–17.
Hu H., Wang B.T., Lee C.H., & Su J.S. (2006). Damage detection of surface cracks in composite laminates using modal analysis and strain energy method. Composite Structure 74, 399–405.
Hu, H.-W., & Wu. C.B. (2008). Non-destructive Damage Detection of Two Dimensional Plate Structures Using Modal Strain Energy Method. Journal of Mechanics, 24, 319 – 332.
Rao, P.S., & Ratnam, Ch. (2012). Health monitoring of welded structures using statistical process control. Mechanical Systems and Signal Processing, 27, 683–695.
Zhong, H., & Yang, M. (2016). Damage detection for plate-like structures using generalized curvature mode shape method. Journal of Civil Structural and Health Monitoring. 6, 141-152
Randall J. A. (2003). The Modal Assurance Criterion –Twenty Years of Use and Abuse” journal of sound and vibration.
Maia, N. M. M., Silva, J. M. M., & Almas, E. A. M. (2003). Damage detection in structures: from mode Shape to frequency response function methods. Mechanical Systems and Signal Processing, 17, 489–498.
Salawu, O.S. & Williams, C.(1994). Damage location using vibration mode shapes International Modal Analysis Conference, 933–939.
Xu, F.Y., Zhu, W. D., & Smith, S. A. (2017). Non-model-based damage identification of plates using principal, mean and Gaussian curvature mode shapes. Journal of Sound and Vibration, 400, 626-659.
Rucevskis, S., Janeliukstis, R., Akishin, & P., Chate, A. (2016). Mode shape-based damage detection in plate structure without baseline data. Structural Control and Health Monitoring ,23, 1180-1193.
Rucevskis, S., Sumbatyan, M. A., Akishin, P., & Chate, A. (2015). Tikhonov’s
regularization approach in mode shape curvature analysis applied to damage detection. Mechanics Research Communications, 65, 9–16.
He, W.-Y., He, J., & Ren, W.-X. (2018). Damage localization of beam structures using mode shape extracted from moving vehicle response. Measurement, 121, 276–285.
Janeliukstis, R., Rucevskis, S., Wesolowski, M., & Chate, A. (2017). Experimental structural damage localization in beam structure using spatial continuous wavelet transform and mode shape curvature methods. Measurement, 102, 253–270.
Dahak, M., Touat, N., & Kharoubi, M. (2018). Damage detection in beam through change in measured frequency and undamaged curvature mode shape. Inverse Problems in Science and Engineering, 1–26.
Yang, C., & Oyadiji, S. O. (2017). Damage detection using modal frequency curve and squared residual wavelet coefficients-based damage indicator. Mechanical Systems and Signal Processing, 83, 385–405
Pedram, M., Esfandiari, A., & Khedmati, M. R. (2017). Frequency domain damage detection of plate and shell structures by finite element model updating. Inverse Problems in Science and Engineering, 26(1), 100–132.
Jung, S., Seong, W., & Lee, K. (2018). Damage detection on an aluminum plate from the cross-correlation of diffuse field using the support vector machine. Ocean Engineering, 161, 88–97.
Liu, Z., Sun, K., Song, G., He, C., & Wu, B. (2016). Damage localization in aluminum plate with compact rectangular phased piezoelectric transducer array. Mechanical Systems and Signal Processing, 70-71, 625–636.
Atef, Eraky. , Alaa Saad., Ahmed, M., Anwar, Ayman, & Abdo, (2015). Damage detection of plate-like structures based on residual force vector. HBRC Journal, 12, 255-262.
Manoach, E., Cao, M., & Doneva, S. (2018). Vibration-based methods for damage detection of plates. AIP Conference Proceedings, 1922, 100014(2018).
