Design of a Broadband Microstrip-to-Microstrip Vertical Transition

Authors

  • Ziwen Tao Ministerial Key Laboratory of JGMT Nanjing University of Science and Technology, Nanjing 210094, China
  • Jianpeng Wang Ministerial Key Laboratory of JGMT Nanjing University of Science and Technology, Nanjing 210094, China
  • Yan Dou Ministerial Key Laboratory of JGMT Nanjing University of Science and Technology, Nanjing 210094, China

Keywords:

Microstrip transition, multilayer circuits, slotlines, Stepped Impedance Resonator (SIR)

Abstract

A broadband microstrip-to-microstrip vertical transition is presented in this paper. The proposed transition consists of two quarterwavelength microstrip stubs and a halfwavelength slotline Stepped Impedance Resonator (SIR) on the common ground plane. The low-impedance section of the microstrip stub is formed by three single arms connecting in parallel, while the high-impedance section of slotline SIR is formed by four single arms connecting in series. A sample transition is designed and measured. Experimental results indicate that over 143% bandwidth with better than 10 dB return loss and below 2 dB insertion loss can be achieved.

Downloads

Download data is not yet available.

References

R. Valois, D. Baillargeat, S. Verdyme, M. Lahti, and T. Jaakola, “High performances of shielded LTCC vertical transitions from DC up to 50 GHz,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 6, pp. 2026-2032, June 2005.

F. Casares-Miranda, C. Viereck, C. CamachoPenãlosa, and C. Caloz, “Vertical microstrip transition for multilayer microwave circuits with decoupled passive and active layers,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 7, pp. 401-403, July 2006.

L. Zhu and K. Wu, “Ultra broadband vertical transition for multilayer integrated circuits,” IEEE Microw. Guided Wave Lett., vol. 9, no. 11, pp. 453-455, November 1999.

M. Abbosh, “Ultra wideband vertical microstripmicrostrip transition,” IET Microw. Antennas Propag., vol. 1, no. 5, pp. 968-972, October 2007.

C. Chen, M. Tsai, and G. Alexopoulos, “Optimization of aperture transitions for multiport microstrip circuits,” IEEE Trans. Microw. Theory Tech., vol. 44, no. 12, pp. 2457-2465, December 1996.

X. B. Huang and K. L. Wu, “A broadband and vialess vertical microstrip-to-microstrip transition,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 4, pp. 938-944, April 2012.

E. S. Li, J. Cheng, and C. Lai, “Designs for broadband microstrip vertical transitions using cavity couplers,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 1, pp. 464-472, January 2006.

T. Swierczynski, D. McNamara, and M. Clenet, “Via-walled cavities as vertical transitions in multilayer millimeter-wave circuits,” IET Electron. Lett., vol. 39, no. 25, pp. 1829-1831, December 2003.

J. Chramiec, “Reactances of slotline short and open circuits on alumina substrate,” IEEE Trans. Microw. Theory Tech., vol. 37, no. 10, pp. 1638- 1641, October 1989.

P. Soltysiak and J. Chramiec, “Design of broadband transitions from microstrip to slotline,” IET Electronics Letters, vol. 30, no. 4, pp. 328- 329, February 1994.

Downloads

Published

2021-09-03

How to Cite

[1]
Z. . Tao, J. . Wang, and Y. . Dou, “Design of a Broadband Microstrip-to-Microstrip Vertical Transition”, ACES Journal, vol. 29, no. 09, pp. 743–747, Sep. 2021.

Issue

Section

Articles