Microstrip Low-Pass Filter with Sharp Roll-Off Using Transformed Radial Stubs

Authors

  • Mohsen Hayati Electrical Engineering Department Islamic Azad University, Faculty of Engineering, Kermanshah Branch, Kermanshah, Iran
  • Hossein Shahbazitabar Electrical Engineering Department Islamic Azad University, Faculty of Engineering, Kermanshah Branch, Kermanshah, Iran
  • Gelareh Hajian Electrical Engineering Department Islamic Azad University, Faculty of Engineering, Kermanshah Branch, Kermanshah, Iran

Keywords:

Figure of merit, insertion loss, microstrip low-pass filter, return loss and roll-off rate

Abstract

A novel microstrip low-pass filter with good characteristics, such as sharp roll-off, wide stop-band, low insertion loss and good return loss is presented. The proposed filter with a 3 dB cut off frequency at 1.19 GHz, roll-off rate equal to 218 dB/GHz and a relative stop-band bandwidth of 163.5% (referred to a suppression level of -20 dB) is designed, fabricated and measured, achieving a highest figure of meritequal to 77228. There is good agreement between the simulation and measurement results.

Downloads

Download data is not yet available.

References

D. M. Pozar, “Microwave engineering,” Wiley, New York, 2005.

J. P. Wang, L. Ge, Y. X. Guo and W. Wu, “Miniaturised microstrip low-pass filter with broad stop-band and sharp roll-off,” Electronic Letters, vol. 46, no. 8, pp. 573-575, 2010.

J. L. Li, S. W. Qu, and Q. Xue, “Compact microstrip low-pass filter with sharp roll-off and wide stop-band,” Electronic Letters, vol. 45, no. 2, pp. 110-111, 2009.

J. Wang, L. J. Xu, S. Zhao, Y. X. Guo, and W. Wu, “Compact quasi-elliptic microstrip low-pass filter with wide stop-band,” Electronic Letters, vol. 46, no. 20, pp. 1384-1385, 2010.

K. Ma, K. S. Yeo, and W. M. Lim, “Ultra-wide rejection band low-pass cell,” Electronic Letters, vol. 48, no. 2, pp. 99-100, 2012.

M. Hayati and A. Lotfi, “Elliptic-function low-pass filter with sharp cutoff frequency using slit-loaded tapered compact microstrip resonator cell,” Electronic Letters, vol. 46, no. 2, pp. 143-144, 2010.

L. Ge, J. P. Wang, and Y. X. Guo, “Compact microstrip low-pass filter with ultra-wide stopband,” Electronic Letters, vol. 46, no. 10, pp. 689- 691, 2010.

Q. He and C. Liu, “A novel low-pass filter with an embedded band-stop structure for improved stopband characteristic,” IEEE Microwave Wireless Component Letters, vol. 19, no. 10, pp. 629-631, 2009.

M. Challa, A. Boutejdar, M. Dehmas, A. Azrar, and A. S. Omar, “Compact microstrip low-pass filter design with ultra-wide reject band using a novel quarter-circle DGS shape,” Applied Computational Electromagnetics Society Journal, vol. 27, no. 10, pp. 808-815, 2012.

A. Faraghi, M. N. Azarmanesh, and M. Ojaroudi, “Small microstrip low-pass filter by using novel defected ground structure for UWB applications,” Applied Computational Electromagnetics Society Journal, vol. 28, no. 4, pp. 341-347, 2013.

A. Adinehvand and A. Lotfi, “Compact low-pass filter with wide stop-band using open stubs-loaded spiral microstrip resonant cell,” Applied Computational Electromagnetics Society Journal, vol. 28, no. 1, pp. 27-34, 2013.

Downloads

Published

2021-09-03

How to Cite

[1]
M. . Hayati, H. . Shahbazitabar, and G. . Hajian, “Microstrip Low-Pass Filter with Sharp Roll-Off Using Transformed Radial Stubs”, ACES Journal, vol. 29, no. 05, pp. 409–414, Sep. 2021.

Issue

Section

General Submission