Design and Analysis of The Stub and Radial-Stub Loaded Resonator Band-Pass Filter with Cross-Shaped Coupled Feed-Lines for UWB Applications

Authors

  • B. Mohammadi Department of Electrical Engineering Urmia University, Urmia, Iran
  • J. Nourinia Department of Electrical Engineering Urmia University, Urmia, Iran
  • Ch. Ghobadi Department of Electrical Engineering Urmia University, Urmia, Iran
  • A. Valizade Young Researchers Club, Qaemshahr Branch Islamic Azad University, Qaemshahr, Iran

Keywords:

Band-pass filter, cross-shaped coupled lines, radial stub loaded resonator, stub loaded, ultra-wideband applications

Abstract

In this paper, the procedure of attaining a compact microstrip ultra-wideband (UWB) band-pass filter (BPF) by the use of stub and radial stub loaded resonator and also cross-shaped coupled lines (CCLs) as feed-lines, is presented and discussed. Implementation of CCLs results in suppression of the unwanted pass-band harmonics while by loading the resonator, additional transmission zeros (TZs) are produced, which lead to improvement of the in-band performance of the BPF. Measurement results of the fabricated UWB BPF are in good agreement with simulation predictions and the presented BPF has a sharp rolloff and improved out-of-band performance in the frequency band of interest.

Downloads

Download data is not yet available.

References

Revision of Part 15 of the Commission’s Rules Regarding Ultra-Wide-band Transmission System FCC, Washington, DC, ET- Docket pp. 98-153, 2002.

F. Karshenas, A. Mallahzadeh, and J. RashedMohasse, “Size reduction and harmonic suppression of parallel coupled-line band-pass filters using defected ground structure,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 25, no. 2, pp. 149-155, Feb. 2010.

Q. Chu, X. Wu, and X. Tian, “Novel UWB bandpass filters using stub-loaded multiple-mode resonator,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 8, pp. 403-405, Aug. 2011.

L. Zhu, S. Sun, and W. Menzel, “Ultra-wideband (UWB) bandpass filters using multiple-mode resonator,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 11, pp. 796-798, Nov. 2005.

H. Deng, Y. Zhao, L. Zhang, X. Zhang, and S. Gao, “Compact quintuple-mode stub-loaded resonator and UWB filter,” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 8, pp. 438-440, Aug. 2010.

S. Sun and L. Zhu, “Capacitive-ended interdigital coupled lines for UWB bandpass filters with improved out-of-band performance,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 8, pp. 440-442, Aug. 2006.

X. Tian, Q. Chu, H. Zhu, and X. Wu, “A UWB bandpass filter with wide stopband performance using cross-shaped coupled lines,” Microwave and Millimeter Wave Technology (ICMMT) International Conference, pp. 1-4, 2012.

J. Xu, W. Wu, W. Kang, and C. Miao, “Compact UWB bandpass filter with a notched band using radial stub loaded resonator,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 7, pp. 351- 353, July 2012.

R. Habibi, C. Ghobadi, J. Nourinia, M. Ojaroudi, and N. Ojaroudi, “Very compact broad band-stop filter using periodic l-shaped stubs based on selfcomplementary structure for x-band application,” Electron. Lett., vol. 48, no. 23, pp. 1483-1484, Nov. 2012.

Ansoft High Frequency Structure Simulation (HFSS), ver. 13, Ansoft Corporation, 2010.

Downloads

Published

2021-09-27

How to Cite

[1]
B. . Mohammadi, J. . Nourinia, C. . Ghobadi, and A. . Valizade, “Design and Analysis of The Stub and Radial-Stub Loaded Resonator Band-Pass Filter with Cross-Shaped Coupled Feed-Lines for UWB Applications”, ACES Journal, vol. 28, no. 09, pp. 851–857, Sep. 2021.

Issue

Section

General Submission