A New Mode Stirrer Design for the Reverberation Chamber

Authors

  • Jiazhi Tang School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China
  • Furong Li School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China
  • Junhao Zheng School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China
  • Xiaoming Chen School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China
  • Yingsong Li 1 College of Information and Communication Engineering Harbin Engineering University, Harbin, 150001, China ,2 Key Laboratory of Microwave Remote Sensing National Space Science Center, Chinese Academy of Sciences, Beijing, 100190, China
  • Juan Chen Shenzhen Research School Xi'an Jiaotong University, Shenzhen, 518057, China

Keywords:

Independent sample number, measurement uncertainty, mode stirrer, reverberation chamber

Abstract

In this paper, a mode stirrer composed of random positioned metal plates is proposed for reverberation chamber. The designing procedure of the mode stirrer is presented. The designed stirrer is compared with the common Z-shaped stirrer in both simulation and measurement. It is shown that in general the proposed stirrer outperforms the common Z-shaped stirrer with the same sweeping volume. Nevertheless, the measurement results show that the performance improvement of the designed stirrer becomes insignificant at higher frequencies with additional platform stirring. Albeit the difference, the stirring improvement of the designed stirrer is clearly demonstrated at low frequencies, which is more important due to the inherent low mode density at low frequency.

Downloads

Download data is not yet available.

Author Biographies

Jiazhi Tang, School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China

Jiazhi Tang is currently pursuing the Ph.D. degree in Xi’an Jiaotong University. His research interest is metasurface and reverberation chamber.

Furong Li, School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China

Furong Li is a Research Assistant at Xi’an Jiaotong University, Xi’an, China.

Junhao Zheng, School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China

Junhao Zheng is currently pursuing the Ph.D. degree in Xi'an Jiaotong University. His research interest is OTA testing. He received the B.S. degree in Shandong University, Shandong, China, in 2017, and M.S. degree in Northwest Polytechnic University, Xi’an, China, in 2020.

Xiaoming Chen, School of Information and Communications Engineering Xi’an Jiaotong University, Xi’an, 710049, China

Xiaoming Chen (M'16, SM'19) received the B.Sc. degree in Electrical Engineering from Northwestern Polytechnical University, Xi’an, China, in 2006, and M.Sc. and Ph.D. degrees in Electrical Engineering from Chalmers University of Technology, Gothenburg, Sweden, in 2007 and 2012, respectively. From 2013 to 2014, he was a Postdoctoral Researcher at the same University. From 2014 to 2017, he was with Qamcom Research & Technology AB, Gothenburg, Sweden, where he was involved in the EU H2020 5GPPP mmMAGIC project (on 5G millimeter-wave wireless access techniques). Since 2017, he has been a Professor at Xi’an Jiaotong University, Xi’an, China. His research areas include 5G multi-antenna techniques, over-the-air (OTA) testing, and reverberation chambers. He has coauthored one book, two book chapter, more than 80 journal papers on these topics. Chen serves as an Associate Editor (AE) for the journal of IEEE Antennas and Wireless Propagation Letters (AWPL). He was also a Guest Editor of a Special Cluster on "5G/6G enabling antenna systems and associated testing technologies" in AWPL and a Special Issue on "Metrology for 5G Technologies" in the journal of IET Microwaves, Antennas & Propagation. He received the URSI (International Union of Radio Science) Young Scientist Awards in 2017 and 2018, and the IEEE outstanding AE awards in 2018 and 2019.

Yingsong Li, 1 College of Information and Communication Engineering Harbin Engineering University, Harbin, 150001, China ,2 Key Laboratory of Microwave Remote Sensing National Space Science Center, Chinese Academy of Sciences, Beijing, 100190, China

Yingsong Li (M’14-SM’19) received his B.S. degree in Electrical and Information Engineering, and M.S. degree in Electromagnetic Field and Microwave Technology from Harbin Engineering University, 2006 and 2011, respectively. He received his Ph.D. degree from both Kochi University of Technology (KUT), Japan and Harbin Engineering University, China in 2014. He was a Visiting Scholar of University of California, Davis from March 2016 to March 2017, a visiting Professor of University of York, UK in 2018, a Visiting Professor of Far Eastern Federal University (FEFU) and KUT from 2018. He is a Postdoc of Key Laboratory of Microwave Remote Sensing, Chinese Academy of Sciences from 2016 to 2020. Now, he is a full professor of Harbin Engineering University from July 2014. He is a Fellow of Applied computational Electromagnetics Society (ACES Fellow), and he is also a senior member of Chinese Institute of Electronics (CIE) and a senior member of IEEE. He has authored and coauthored about 300 publications in various areas of electrical engineering, antennas and wireless communications. His current research interests include remote sensing, underwater communications, signal processing, radar, SAR imaging, metasurface designs and microwave antennas.
Li is an Area Editor of AEÜ-International Journal of Electronics and Communications, and he is an Associate Editor of IEEE Access and Applied Computational Electromagnetics Society Journal (ACES Journal). He is the TPC Co-Chair of the 2019-2020 IEEE International Workshop on Electromagnetics(iWEM 2019), 2019 IEEE 2nd International Conference on Electronic Information and Communication Technology (ICEICT 2019), 2019 International Applied Computational Electromagnetics Society (ACES) Symposium-China, 2019 Cross Strait Quad-regional Radio Science and Wireless Technology Conference (2019 CSQRWC), and iWEM 2020. He also serves as a Session Chair or Organizer for many international conferences, including the WCNC, AP-S, ACES etc. He acts as a Reviewer of numerous IEEE, IET, Elsevier and other international journals.

Juan Chen, Shenzhen Research School Xi'an Jiaotong University, Shenzhen, 518057, China

Juan Chen was born in Chongqing, China, in 1981. She received the Ph.D. degree in Electromagnetic Field and Microwave Techniques at the Xi’an Jiaotong University, Xi’an, China, in 2008. From April 2016 to March 2017, she was a Visiting Researcher in the Department of Electrical and Computer Engineering, Duke University, Durham, NC, under the financial support from the China Scholarship Council. She now serves as a Professor at Xi’an Jiaotong University.
Her research interests are the numerical electromagnetic methods, advanced antenna designs, and graphene theory and application.

References

X. Chen, J. Tang, T. Li, S. Zhu, Y. Ren, Z. Zhang, and A. Zhang, “Reverberation chambers for over-the-air tests: An overview of two decades of research,” IEEE Access, vol. 6, pp. 49129-49143, Aug. 2018.

IEC 61000-4-21: Electromagnetic Compatibility (EMC), Part 4-21: Testing and Measurement Techniques- Reverberation Chamber Test Methods. Int. Electrotech Comm., Edition 2.0, 2011.

A. Gifuni, I. D. Flintoft, S. J. Bale, G. C. R. Melia, and A. C. Marvin, “A theory of alternative methods for measurements of absorption cross section and antenna radiation efficiency using nested and contiguous reverberation chambers,” IEEE Trans. Electromagn. Compat., vol. 58, no. 3, pp. 678-685, June 2016.

M. Barazzetta, D. Micheli, L. Bastianelli, R. Diamanti, M. Totta, P. Obino, R. Lattanzi, F. Moglie, and V. Mariani Primiani, “A comparison between different reception diversity schemes of a 4G-LTE base station in reverberation chamber: A deployment in a live cellular network,” IEEE Trans. Electromagn. Compat., vol. 59, no. 6, pp. 2029- 2037, Dec. 2017.

K. A. Remley, R. J. Pirkl, C. Wang, D. Senić, A. C. Homer, M. V. North, M. G. Becker, R. D. Horansky, and C. L. Holloway, “Estimating and correcting the device-under-test transfer function in loaded reverberation chambers for over-the-air tests,” IEEE Trans. Electromagn. Compat., vol. 59, no. 6, pp. 1724-1734, Dec. 2017.

X. Chen, “Experimental investigation of the number of independent samples and the measurement uncertainty in a reverberation chamber,” IEEE Trans. Electromagn. Compat., vol. 55, no. 5, pp. 816-824, Oct. 2013.

N. Wellander, O. Lunden, and M. Bäckström, “Experimental investigation and methematical modeling of design parameters for efficient stirrers in mode-stirred reverberation chambers,” Trans. Electromagn. Compat., vol. 49, no. 1, pp. 94-103, Feb. 2007.

C. Lemoine, P. Besnier, and M. Drissi, “Estimating the effective sample size to select independent measurements in a reverberation chamber,” IEEE Trans. Electromagn. Compat., vol. 50, no. 2, pp. 227-236, May 2008.

R. J. Pirkl, K. A. Remley, and C. S. L. Patané, “Reverberation chamber measurement correlation,” IEEE Trans. Electromagn. Compat., vol. 54, no. 3, pp. 533-544, June 2012.

X. Chen, “On near-field and far-field correlations in reverberation chambers,” IEEE Microw. and Wireless Compon. Lett., vol. 29, no. 1, pp. 74-76, Jan. 2019.

G. Gradoni, V. Mariani Primiani, and F. Moglie, “Reverberation chamber as a multivariate process: FDTD evaluation of correlation matrix and independent positions,” Progress in Electromagnetics Research, vol. 133, pp. 217-234, Jan. 2013.

J. Clegg, A. C. Marvin, J. F. Dawson, and S. J. Porter, “Optimization of stirrer designs in a reverberation chamber,” IEEE Trans. Electromagn. Compat., vol. 47, no. 4, pp. 824-832, Nov. 2005.

Q. Xu and Y. Huang, Anechoic and Reverberation Chambers: Theory, Design and Measurements. Wiley-IEEE Press, 2018

W. Petirsch and A. J. Schwab, “Investigation of the field uniformity of a mode-stirred chamber using diffusers based on acoustic theory,” IEEE Trans. Electromagn. Compat., vol. 41, no. 4, pp. 446-451, Nov. 1999.

X. Chen, “Measurement uncertainty of RC and its reduction techniques for OTA tests: A review,” IET Microw., Antennas, Propag., vol. 13, no. 15, pp. 2598-2604, May 2019.

X. Chen, “Scaling factor for turn-table platform stirring in reverberation chamber,” IEEE Antennas and Wireless Propagat. Lett., vol. 16, pp. 2799- 2802, Aug. 2017.

G. Cerri, V. Mariani Primiani, S. Pennesi, and P. Russo, “Source stirring mode for reverberation chambers,” IEEE Trans. Electromagn. Compat., vol. 47, no. 4, pp. 815-823, Nov. 2005.

X. Chen, W. Xue, H. Shi, J. Yi, and W. E. I. Sha, “Orbital angular momentum multiplexing in highly reverberant environments,” IEEE Microw. and Wireless Compon. Lett., vol. 30, no. 1, pp. 112-115, Jan. 2020.

L. Wanderlinder, D. Lemaire, I. Coccato, and D. Seetharamdoo, “Practical implementation of metamaterials in a reverberation chamber to reduce the LUF,” IEEE 5th Int. Symp. Electromag. Compat., Beijing, China, Oct. 2017.

H. Sun, C. Gu, Z. Li, Q. Xu, J. Song, B. Xu, X. Dong, K. Wang, and F. Martín, “Enhancing the number of modes in metasurfaced reverberation chambers for field uniformity improvement,” Sensor, vol. 18, pp. 1-10, Sep. 2018.

J.-B. Gros and P. Hougne, “Tuning a regular cavity to wave chaos with metasurface-reconfigurable walls,” Phy. Review A, vol. 101, 061801(R), June 2020.

P.-S. Kildal, X. Chen, C. Orlenius, M. Franzén, C. and S. Lötbäck Patané, “Characterization of reverberation chambers for OTA measurements of wireless devices: physical formulations of channel matrix and new uncertainty formula,” IEEE Trans. Antennas Propagat., vol. 60, no. 8, pp. 3875-3891, Aug. 2012.

Downloads

Published

2021-11-06

How to Cite

[1]
J. . Tang, F. . Li, J. . Zheng, X. . Chen, Y. . Li, and J. . Chen, “A New Mode Stirrer Design for the Reverberation Chamber”, ACES Journal, vol. 36, no. 09, pp. 1182–1188, Nov. 2021.

Issue

Section

General Submission