Reducing the Measurement Time in a Reverberation Chamber to Less than 1 Second

Authors

  • Wenjun Xia College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China
  • Wenjun Qi College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China
  • Feng Fang College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China
  • Chong Li College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China
  • Lei Xing College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China
  • Qian Xu College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China

DOI:

https://doi.org/10.13052/2023.ACES.J.380104

Keywords:

reverberation chamber, multi-probe system, measurement technique, OTA

Abstract

To increase the speed of the measurement, a time-efficient multi-probe system in a reverberation chamber (RC) is validated. The system consists of 4 printed circuit board (PCB) switches integrating with 128 probe antennas. By using solid-state switches, all antennas can be switched over in sequence in less than 1 second. Typical characteristics of the RC and the total radiated power (TRP) of the device under test (DUT) are performed to verify the validity of this configuration. Compared with the RC using mechanical stirrers, this system shows its superiority in terms of testing efficiency.

Downloads

Download data is not yet available.

Author Biographies

Wenjun Xia, College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China

Wenjun Xia received his B.Eng. degree in Electronic Information Engineering from Suzhou University of Science and Technology, Suzhou, China in 2020. He is currently pursuing a M.Eng. degree in Electromagnetic Field and Microwave Technology at Nanjing University of Aeronautics and Astronautics, Nanjing, China. His main research interests include reverberation chambers, spatial channel models, over-the-air testing, and electromagnetic compatibility.

Wenjun Qi, College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China

Wenjun Qi received her B.Eng. degree and M.Eng. degree from Nanjing University of Aeronautics and Astronautics, Nanjing, China in 2018 and 2021, respectively. She is currently pursuing a PhD in Electromagnetic Field and Microwave Technology. Her main research interests include reverberation chambers, computational electromagnetics and statistical electromagnetics, over-the-air testing, and electromagnetic compatibility.

Feng Fang, College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China

Feng Fang received his B.Eng. degree in Electromagnetic Field and Microwave Technology from Nanjing University of Aeronautics and Astronautics, Nanjing, China in 2020, where he has been currently working toward his M.Eng. His main research interests include microwave measurement techniques, reverberation chambers, and wireless communication testing, especially over-the-air testing.

Chong Li, College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China

Chong Li received his B.Eng. degree in Communication Engineering from Nanchang Hangkong University, Nanchang, China in 2021. He is currently pursuing a M.Eng. degree in Electromagnetic Field and Microwave Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, China. His research interests include reverberation chambers, phased array systems, electromagnetic compatibility, and antenna design.

Lei Xing, College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China

Lei Xing received her B.Eng. and M.Eng. degrees from the School of Electronics and Information, Northwestern Polytechnical University, Xi’an, China, in 2009 and 2012. She received her PhD in Electrical Engineering and Electronics at the University of Liverpool, U.K. in 2015. She is currently an Associate Professor at the College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, China.

Qian Xu, College of Electronic and Information Engineering Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China

Qian Xu received his B.Eng. and M.Eng. degrees from the Department of Electronics and Information, Northwestern Polytechnical University, Xi’an, China, in 2007 and 2010, and his PhD in Electrical Engineering from the University of Liverpool, U.K. in 2016. He is currently an Associate Professor at the College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, China. He was a radio frequency (RF) engineer in Nanjing, China in 2011, an Application Engineer at CST Company, Shanghai, China in 2012. His work at the University of Liverpool was sponsored by Rainford EMC Systems Ltd (now part of the Microwave Vision Group) and the Centre for Global Eco-Innovation. He has designed many chambers for industry and is the author of the book Anechoic and Reverberation Chambers: Theory, Design, and Measurements (Wiley-IEEE, 2019). His research interests include statistical electromagnetics, reverberation chambers, electromagnetic compatibility, and over-the-air testing.

References

D. A. Hill, Electromagnetic Fields in Cavities: Deterministic and Statistical Theories, Wiley-IEEE, New Jersey, USA, 2009.

Q. Xu and Y. Huang, Anechoic and Reverberation Chambers: Theory, Design and Measurements, Wiley-IEEE, Chichester, UK, 2019.

C. L. Holloway, H. A. Shah, R. J. Pirkl, W. F. Young, D. A. Hill, and J. Ladbury, “Reverberation chamber techniques for determining the radiation and total efficiency of antennas,” IEEE Trans. Antennas Propag., vol. 60, no. 4, pp. 1758-1770, Apr. 2012.

W. Xue, Y. Ren, X. Chen, Z. Wang, Y. Li, and Y. Huang, “Measurement uncertainty of antenna efficiency measured using the two-antenna method in a reverberation chamber,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 9, pp. 1152-1158, Sep. 2021.

G. B. Tait, C. Hager, M. B. Slocum, and M. O. Hatfield, “On measuring shielding effectiveness of sparsely moded enclosures in a reverberation chamber,” IEEE Trans. Electromagn. Compat., vol. 55, no. 2, pp. 231-240, Apr. 2013.

X. Chen, P.-S. Kildal, J. Carlsson, and J. Yang, “MRC diversity and MIMO capacity evaluations of multi-port antennas using reverberation chamber and anechoic chamber,” IEEE Trans. Antennas Propag., vol. 61, no. 2, pp. 917-926, Feb. 2013.

H. G. Krauthauser, “On the measurement of total radiated power in uncalibrated reverberation chambers,” IEEE Trans. Electromagn. Compat., vol. 49, no. 2, pp. 270-279, May 2007.

L. Ma, A. Marvin, Y. Wen, E. Karadimou, and R. Armstrong, “An investigation of the total radiated power of pantograph arcing measured in a reverberation chamber,” International Conference on Electromagnetics in Advanced Applications (ICEAA), Palm Beach, Aruba, pp. 550-553, 2014.

F. Li, S. Huang, W. Xue, Y. Ren, and X. Chen, “Signal and coherence bandwidth effects on total radiated power measurements of LTE devices in reverberation chambers,” IEEE Transactions on Instrumentation and Measurement, vol. 71, no. 5500503, pp. 1-3, Jan. 2022.

W. Xue, F. Li, X. Chen, S. Zhu, A. Zhang, and T. Svensson, “A unified approach for uncertainty analyses for total radiated power and total isotropic sensitivity measurements in reverberation chamber,” IEEE Transactions on Instrumentation and Measurement, vol. 70, no. 1003112, pp. 1-12, Jan. 2021.

C. Orlenius, P.-S. Kildal, and G. Poilasne, “Measurements of total isotropic sensitivity and average fading sensitivity of CDMA phones in reverberation chamber,” IEEE Antennas and Propagation Society International Symposium, Washington, DC, USA, pp. 409-412, 2005.

J. Tang, F. Li, J. Zheng, X. Chen, Y. Li, and J. Chen, “A new mode stirrer design for the reverberation chamber,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 9, pp. 1182-1188, Sep. 2021.

Y. Huang and D. J. Edwards, “A novel reverberating chamber: the source-stirred chamber,” Eighth International Conference on Electromagnetic Compatibility, Edinburgh, UK, pp. 120-124, 1992.

A. De Leo, G. Cerri, P. Russo, and V. M. Primiani, “Experimental comparison between source stirring and mechanical stirring in a reverberation chamber by analyzing the antenna transmission coefficient,” International Symposium on Electromagnetic Compatibility (EMC EUROPE), Amsterdam, Netherlands, pp. 677-682, 2018.

A. De Leo, V. M. Primiani, P. Russo, and G. Cerri, “Optimization techniques for source stirred reverberation chambers,” International Symposium on Electromagnetic Compatibility — EMC EUROPE, Wroclaw, Poland, pp. 199-204, 2016.

W. Li, C. Yue, and W. Yu, “Study on array source stirring reverberation chamber, ” Applied Computational Electromagnetics Society (ACES) Journal, vol. 29, no. 12, pp. 1067-1076, Dec. 2014.

A. Cozza, “Source correlation in randomly excited complex media,” IEEE Antennas Wireless Propag. Lett., vol. 11, pp. 105-108, Jan. 2012.

W. Li, C. Yue, and W. Yu, “Study on array source stirring reverberation chamber,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 29, no. 12, pp. 1067-1076, Aug. 2021.

D. Mandaris, R. Vogt-Ardatjew, E. Suthau, and F. Leferink, “Simultaneous multi-probe measurements for rapid evaluation of reverberation chambers,” IEEE International Symposium on Electromagnetic Compatibility and IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, Suntec City, Singapore, pp. 590-594, 2018.

D. Mandaris, R. Vogt-Ardatjew, M. Z. Mahfouz, E. Suthau, and F. Leferink, “Time efficient reverberation chamber performance analysis using simultaneous multiprobe measurement technique,” International Symposium on Electromagnetic Compatibility, Amsterdam, Netherlands, pp. 1-5, 2018.

W. Qi, F. Fang, W. Xia, Y. Zhao, L. Xing, and Q. Xu, “A compact multi-probe reverberation chamber for over-the-air testing,” Applied Computational Electromagnetics Society (ACES) Journal, vol. 36, no. 9, pp. 1196-1201, Sep. 2021.

IEC 61000-4-21, Electromagnetic Compatibility (EMC) – Part 4-21: Testing and Measurement Techniques – Reverberation Chamber Test Methods, IEC Standard, Ed 2.0, Jan. 2011.

Q. Xu, W. Qi, C. Liu, L. Xing, D. Yan, Y. Zhao, T. Jia, and Y. Huang, “Measuring the total radiated power of wideband signals in a reverberation chamber,” IEEE Antennas Wireless Propag. Lett., vol. 19, no. 12, pp. 2260-2264, Oct. 2020.

W. Xue, F. Li, X. Chen, and T. Svensson, “Statistical analysis of measurement uncertainty in total radiated power of wireless devices in reverberation chamber,” IET Microwaves, Antennas & Propagation, vol. 14, no. 11, pp. 1241-1245, Jun. 2020.

N. Wellander, M. Elfsberg, H. Sundberg, and T. Hurtig, “Destructive testing of electronic components based on absorption cross section RC measurements,” International Symposium on Electromagnetic Compatibility — EMC EUROPE, Barcelona, Spain, pp. 778-783, 2019.

Downloads

Published

2023-01-31

How to Cite

[1]
W. . Xia, W. . Qi, F. . Fang, C. . Li, L. . Xing, and Q. . Xu, “Reducing the Measurement Time in a Reverberation Chamber to Less than 1 Second”, ACES Journal, vol. 38, no. 01, pp. 22–27, Jan. 2023.

Issue

2023: Vol 38 Iss 1

Section

Antennas, Metasurfaces, and Testing Methodologies for 5G/6G Communication